XY Precision Linear Stage suits metrology applications.
Equipped with PIOne interferometric linear encoder, 2-axis PI miCos MCS can handle loads up to 45 lb withÂ- resolution to 5 nm and repeatability of 0.2 µm. With reduced maximum speed, 1 nm resolution is feasible. Stage provides 4 in. of positioning range in both axes and achieves ±2 µm straightness/flatness of motion. Angular precision is also optimal with yaw of only...
Read More »
XY Positioning Stage features precision bearing system.
Suitable for high force positioning applications, Model VCS08-700-08-350-CR-01-MC-XY is driven by 3 NCC moving coil type linear actuators. Closed loop systemÂ- is guided by dual crossed roller bearings on X-Axis and precision linear rail on Y-Axis. Each voice coil, providing 0.80 in. stroke, generates 35 lb of continuous force and 105 lb of peak force, or combined 70 lb continuous force and...
Read More »Hybrid Hexapod features 6-D Nano Precision®.
With forward and reverse kinematics, Hybrid PKM Motion System allows for complex hexapod-like motion with tool center point programming. Linear motor Tripod has infinite resolution with less than 10 nm repeatability and accuracy less than 100 nm. Hexapod can be mounted on nano-precision linear XY motion system for 5Â- axes, or optional rotary can be added for full 6-axis...
Read More »
Linear Positioning Stages support high-performance controls.
OEMs and end-users can combine Mini-MAG (MMG) precision linear motor stage with board-level single axis servo drive forÂ- integration into control cabinet. Stages also support integration with Kollmorgen AKD™ servo drive for single- or multi-axis applications, with GUI for facilitated setup and programming as well as real-time performance feedback. Both options provide...
Read More »
Seal Stuff In, Seal Stuff Out
One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?
Read More »
Microscope XY Stage utilizes ceramic linear motors.
Delivered as complete system including controller, joystick, and software, Model M-687 is available in versions for Olympus IX2 and Nikon Eclipse Ti inverted microscopes. Unit features travel range up to 135 x 85 mm and speeds up to 120 mm/sec. Self-clamping ceramic linear motors provide positional stability, while linear encoders with 100 nm resolution deliver direct position feedback to...
Read More »
Automated XY Stages position microscopy samples.
Measuring 188 x 188 x 45 mm, Open Frame XY Stages replace manual stages found on microscopes and enable scanning speeds at 25 mm/sec. Linear encoder feedback ensures correct positioning with resolution of 0.1 Â-µm and repeatability of 0.25 µm, while motion controller allows smooth positioning without vibration or shock to delicate samples. Very precise manual fine positioning is...
Read More »
Micro Manipulator Stage provides 1 µm positional accuracy.
Measuring 105 x 151 x 25 mm, Model MT 105-50-LM provides 50 mm travel with ±1 Â-µm straightness/flatness runout and ±0.2 µm repeatability. Anodized aluminum unit includes preloaded cross roller bearings, fixed stops, and incremental linear encoder with 0.1 µm resolution. Available as XY stage without adapter plate or configured as XYZ system with optional bracket,...
Read More »
Linear Dual-Axis Stages provide 1 nm resolution.
With low profile of 85 mm, Series ANT130-XY offers travels up to 160 x 160 mm with 1 nm resolution, 75 nm repeatability, and 250 nm accuracy/axis. Stages utilize crossed roller bearings and direct-drive technology, which has no hysteresis or backlash, enabling accurate motion in both X and Y dimensions. Applications include data storage, semiconductors, laser micromachining, sensor testing,...
Read More »
Earthquake Simulation Using Single or Dual-Axis Linear Motion Stages
With the goal of safer buildings and saving lives, scientists and engineers, through the simulation of many recent earthquakes, need to test building materials and structural designs. Using either a one or two-axis high force linear positioning stage from H2W Technologies, they can simulate the effects of earthquakes as large as the largest recorded earthquake in history, the 9.5 magnitude quake...
Read More »XY Extrusion Open Frame Belt Stage
H2W's latest customized XY belt stage gantry uses an open frame design. This specific belt stage gantry was designed to track an image of the sun on the inside of the frame. H2W is able to custom design a variety of linear motion stages and motion control systems to our customers' exacting specifications. SPECIFICATIONS: Travel = 40 in (1 m) each axis Speed = 0.1 to 200 in/s (300 mm/s) Payload =...
Read More »
What Can Test Devices Spin for You?
Test Devices helps you ensure the safety and efficiency of your high performance machines with cutting edge spin testing, rotor engineering, and precision balancing capabilities. Check out the video to learn more.
Read More »
