AirLoc Wedgmounts Provide Building Floor Load Support & Vibration Isolation

AirLoc Wedgmounts Provide Building Floor Load Support & Vibration Isolation

It is a common occurrence that upper floor loadings in existing buildings are changed with the installation of new and frequently heavier machinery. Therefore, existing floors may reach their load limits. In addition, there is danger of exciting critical vibration frequencies when floors, with low natural frequencies, are coupled with the disturbing frequencies of machinery supported on them. In...

Read More »

AirLoc Washing Machine Pads Quiet a Noisy Laundry Room

Residents of an assisted care facility west of Boston were complaining about noise coming from the laundry room next to their living quarters. With the complaints becoming more frequent, management proposed an investment of $15,000 to have the walls and ceiling of the laundry room lined with damping material. AirLoc was made aware of the problem and proposed a cost effective solution. Based on...

Read More »
Mounting Assembly offers various installation alternatives.

Mounting Assembly offers various installation alternatives.

Two-Way Mounting Assembly features hinged collar and adjustable bracket, either of which can be used as base for mounting and then holding something else. Able to position something and securely lock it in place, rigid assembly comes in aluminum, steel, and stainless steel. System consists of hinged collar from -½-4 in. ID that attaches to 4 or 6 in. long mounting bracket using cap screw and can...

Read More »

Laser Diode Mounting Kits suit CS mount lasers.

Turnkey Laser Diode Mounting Kits include 1 aluminum nitride plate and 4 nylon shoulder washers for mounting CS mount or equivalent diodes on cold plates. Plate measures 25 x 25 mm and .635 mm thick with 4 through holes that match diode mounting patterns. It offers thermal conductivity while providing electrical isolation between diode and cold plate. Nylon washers isolate metal screws from diode...

Read More »
Vibration and Shock Mounts have low vertical spring rate.

Vibration and Shock Mounts have low vertical spring rate.

Available for static loads from 33-275 lb, 4 M-Style Base Mounts in A 10Z46M Series range in width and height from 1.18-1.97 in. and 2.72-4.61 in. Their 60 durometer natural rubber controls vibrations of 600 cpm or higher. Comprised of 11 models, V-Style Mountings in A 10Z45M Series is offered in 3 configurations to isolate static loads from 9-1,980 lb. These 45 durometer natural rubber isolators...

Read More »
Cable-Tie Hardware installs permanently without screws.

Cable-Tie Hardware installs permanently without screws.

PEM-® Self-Clinching Type TD(TM) cable tie-mounts and Type TDO(TM) hooks provide permanent attachment points for mounting wires and cables to electronic chassis or enclosures. Both are RoHS compliant and offered in several sizes for installation in metal sheets ranging from .040-.125 in. thick. Tie-mounts allow users to slide ties through hardware's eye for fast cable mounting, while hooks...

Read More »

Vibration Isolating Stations compensate for load changes.

Personal Vibration Isolation Workstations in 9211 Series deliver vertical and horizontal isolation for small labs and tight spaces where external vibrations adversely affect operation of sensitive equipment. Able to accommodate loads to 440 lb, Class 100 cleanroom-compatible units feature Active-Air Suspension system and are available with VibraDamped steel tabletops in sizes from 24 x 24 in. to...

Read More »

Vibration Control Workstation isolates heavy loads.

Suited for heavy, tall, or moving loads, 1200 Series Vibration Isolation Workstation employs Active-Air Suspension to handle up to 2,800 lb loads, including those with high centers of gravity. Vibration-controlled work environment has vertical natural frequency of 1.6 Hz at load and vertical and horizontal isolation efficiencies up to 93% and 88% at load. Along with automatic leveling system,...

Read More »

Adapter mounts CCD camera to microscope.

Microscope-body camera adaptor 07 ACM 001 allows any CCD camera with C-mount interface to be mounted onto any Melles Griot microscope body for remote or heads-up viewing. Two-piece adaptor threads directly into microscope body and allows camera rotation for image alignment.

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics