Electrical Connectors

Wire-to-Board Power Connector has locking latch and 2-level TPA.

Rated for up to 600 Vac and 10 A, single-row Economy Power (EP) II connectors feature crimp contact (terminal) design and dedicated post headers. Housings have .156 in. centerline (3.96 mm pitch) and are available with 2-12 positions to terminate discrete wires from AWG 22-16. Products also feature snap-in receptacle terminal and 12-position breakaway-style contact retainers that provide Terminal...

Read More »
Electrical Connectors

DB9 USB to Digital Modules enhance legacy equipment.

Respectively, DB9-USB-D3-F and -M modules feature 3.3 V output female and male connector, while DB9-USB-D5-F and -M respectively have 5 V output female and male connector. Supplied in 30.8 x 19.8 x 11.5 mm package, each module uses standard USB mini-B connector and enables implementation of USB interconnection into legacy equipment without altering enclosure. All product utilize FT232R USB to...

Read More »
Electrical Connectors

Wire-To-Board Connector integrates up to 20 positions in PCB.

With contacts rated for 250 Vac at 3 A, Economy Power EP 2.5 offers option of combining power and signal in single solution. Plug and receptacle are available in 2-20 positions and can be used to integrate up to 20 discrete 22-26 AWG wires in single PCB section. Headers are shrouded and housings have polarization tabs to prevent post misalignment. Made from UL 94V-0 rated plastic, single-row...

Read More »
Electrical Connectors

Wire-To-Board Connector incorporates friction lock, TPA device.

Designed to interconnect 2-12 discrete power lines (sizes 24-18 AWG) to PCB, SL-156 crimp connector comes in UL 94-0 rated nylon housing that is fully compatible with SL-156 and MTA-156 board headers and can be used as drop-in replacement with existing headers. Single-row connectors with .156 in. contact pitch are rated for up to 250 Vac and up to 10 A. Breakaway-style retainers add Terminal...

Read More »
Electrical Connectors

SD Card Reader features push/push design.

Developed for automotive applications, top-mount FPS009-2920-0 and reverse-mount FPS009-2970-0 have closed metal cover, 4 grounding tabs promote good EMC behavior, and 2 card brakes. Card detection switch, which registers presence of card, is directly at start of introduction area for SD card into reader. Additional features include smooth push-in/-out card insertion and ejection mechanism with...

Read More »
Electrical Connectors

DB9 USB to Digital Modules enhance legacy equipment.

Respectively, DB9-USB-D3-F and -M modules feature 3.3 V output female and male connector, while DB9-USB-D5-F and -M respectively have 5 V output female and male connector. Supplied in 30.8 x 19.8 x 11.5 mm package, each module uses standard USB mini-B connector and enables implementation of USB interconnection into legacy equipment without altering enclosure. All product utilize FT232R USB to...

Read More »
Electrical Connectors

Wire-To-Board Connector integrates up to 20 positions in PCB.

With contacts rated for 250 Vac at 3 A, Economy Power EP 2.5 offers option of combining power and signal in single solution. Plug and receptacle are available in 2-20 positions and can be used to integrate up to 20 discrete 22-26 AWG wires in single PCB section. Headers are shrouded and housings have polarization tabs to prevent post misalignment. Made from UL 94V-0 rated plastic, single-row...

Read More »
Electrical Connectors

Wire-To-Board Connector incorporates friction lock, TPA device.

Designed to interconnect 2-12 discrete power lines (sizes 24-18 AWG) to PCB, SL-156 crimp connector comes in UL 94-0 rated nylon housing that is fully compatible with SL-156 and MTA-156 board headers and can be used as drop-in replacement with existing headers. Single-row connectors with .156 in. contact pitch are rated for up to 250 Vac and up to 10 A. Breakaway-style retainers add Terminal...

Read More »
Electrical Connectors

SD Card Reader features push/push design.

Developed for automotive applications, top-mount FPS009-2920-0 and reverse-mount FPS009-2970-0 have closed metal cover, 4 grounding tabs promote good EMC behavior, and 2 card brakes. Card detection switch, which registers presence of card, is directly at start of introduction area for SD card into reader. Additional features include smooth push-in/-out card insertion and ejection mechanism with...

Read More »
New SATA, eSATA, and Micro USB Covers Protect Sensitive Ports and Cables
Electrical Connectors

New SATA, eSATA, and Micro USB Covers Protect Sensitive Ports and Cables

NORTH ANDOVER, MA - L-com, Inc., a global leader in the manufacture of wired and wireless connectivity products, has unveiled six new items in its series of protective covers. The new products include male and female covers for SATA, eSATA and USB Micro connectors. Connection points between cables and ports are very sensitive to dust and abrasion," said Steve Smith, product manager. "Protective...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics