Two-Armed Robot System features 11-axis design.
Tandem R125 features two 5-axis vertically articulated robot arms mounted to programmable carousel. Also included are 2 interconnected K11R robot controllers enabling communications to synchronize motions of both robots or allowing robots to alternate turns while performing one task. RoboForth II software, teach pad, equipment interfacing, and cables are included in industrial system.
Read More »
ECT to Showcase Fixtures, Connectors and ITC Probes at ITC in Anaheim, CA
Pomona, Calif. - Everett Charles Technologies' (ECT) announces that its Contact Solutions Group (CSG), Compliant Connector Group (CCG) and Fixture Services Group (FSG) will showcase the company's latest products in Booth #114 at the upcoming International Test Conference (ITC), scheduled to take place November 4-9, 2012 at the Disneyland Hotel in Anaheim, CA. CCG will exhibit its entire range of...
Read More »
Attachment System supports solar panel racking installations.
Providing ballast-free, non-penetrating roof membrane attachment of solar module racking systems, U-Anchor 2000™ consists of weatherized steel plate with 3/8 x Â-¾ in. tall stainless steel stud, which has been heat fused to 16 x 16 in. thermoplastic target. Unit installs without fasteners and can perform in conditions that exceed hurricane winds. With ultimate load capacity of 1,000 lb,...
Read More »
Multi-Barbed Plastic Connectors Are Now Available from Industrial Specialties Manufacturing
Industrial Specialties Mfg. (ISM) now offers a complete line of multi-barbed plastic connectors made from natural nylon, black polyethylene, natural polypropylene and black polypropylene. Multi-barbed fittings provide several points of contact with the tubing which reduce the need for clamps at lower pressures. However, clamps are recommended for some pressure situations. The complete line of...
Read More »High Pin Count PGA Sockets Rise Challenge
Various design and performance challenges involved in the manufacture of high pin count pin grid array (PGA) sockets are examined in this paper, evaluating the performance of high pin grid count, 0.100 in. centerline, and non-mechanically actuated LIF PGA sockets. The importance of confirming to the EIA standards on socket design and style is stated, and the contrast between mechanically and non-mechanically actuated sockets is explained. Procedure followed for the evaluation of LIF PGA sockets is described in detail, in addition to the need to include the socket selection, determination of attributes to be monitored, and observing the performance in testing environment. The paper explains the results of the evaluation, states the factors and their influence on the performance of the sockets, and features data representing the test results.
Read More »Peerless-AV's SmartMount XT Line Offers More Easy-to-Install, Precision-Adjustment Features
Tool-Free Height Adjustments, Improved Hinge Mechanism, More Cabling Options Add Up to Time Savings AURORA, Ill. - Taking installation ease to a higher level, the Peerless-AV® SmartMount XT(TM) series of flat-panel TV mounts in articulating, tilt and flat styles achieves expert professional mounting in a fraction of the time. The line of pre-assembled, one-piece mounts that can be affixed...
Read More »Colder Products Company to Showcase New Small and Large Single-Use Sterile Connectors at INTERPHEX 2012
New connectors provide biopharmaceutical manufacturers repeatable, reliable performance for greater process flexibility St. Paul, Minn. - Colder Products Company, the leader in single-use connection technology, is unveiling AseptiQuik® S small-format connectors and AseptiQuik® X large-format connectors at INTERPHEX 2012 (Booth #2537) at the Javits Center in New York. Biopharmaceutical...
Read More »Go Natural Converts an F150 to Bi-Fuel CNG in Just 2 Hours and 15 Minutes
WOODS CROSS, Utah - Go Natural CNG manufactures the least invasive, easiest and quickest to install CNG conversion kits on the market. Lucas Kjar, the President of Go Natural, knew that this statement was true. The challenge was developing a way to convince potential customers. That's when he came up with the idea of converting a vehicle in front of an audience. During the recent Green Fleet...
Read More »
Telescoping Torque Arms reveal improperly fastened screws.
EZ-Glider Position Control telescoping torque arms help manufacturers detect screw-fastening errors during assembly process. Crafted with carbon fiber, arms do not disrupt production flow and come in models with operating length that can extend up to 6Â- ½ ft. Compatible with air, electric screwdriver, and DC control systems, arm consists of torque reaction arm with encoders mounted...
Read More »Large Format Sterile Connectors have single-use design.
Accommodating needs of biopharmaceutical manufacturers, AseptiQuik® X large format 1 in. connectorsÂ- come in flow configurations from 1/8–1 in. and feature Twist-Pull-Twist design that facilitates and accelerates transfer of media. Gamma and high-temperature versions are available, and terminations include ¾ in. hose barb, 1 in. hose barb, and 1 ½ in....
Read More »
Copper Lay-In Connector expands solar grounding options.
UL-Listed and CSA-Certified, GBL-4DBTH conserves timeÂ- by accelerating installation of ground lugs in solar field. This copper lay-in connector features stainless steel hex head screw, which ensures there is no drill drift when it is torqued down. It also reduces chance of damaging rack or panel.
Read More »
Performance Packaging's AIRSHIELD™ Achieves FDA Approval for Food & Beverage Applications
As a globally recognized provider of full-service packaging products and services, we have a history of developing innovative solutions that promote enhanced efficiency in a wide range of packing applications. Our new AIRSHIELD™ product is just another example of how we are helping food and beverage manufacturers to extend the life of their products. To learn more about this cutting-edge product, see our video.
Read More »
