Machine-Leveling Shim adjusts in tiny increments.
Shims

Machine-Leveling Shim adjusts in tiny increments.

Adjustable MicroShim for machine leveling, positioning, and mounting, provides height increments of 0.001 in. over range of 1.0 in. Pair of overlapping wedge plates, with machined surfaces, permit plates to slide parallel to one another. Stainless steel bolt and bar-nut assembly allows user to adjust relative position of plates and set desired height. Shims can be permanently locked into place...

Read More »
Cutters and Inserts handle heat resistant alloys.
Inserts

Cutters and Inserts handle heat resistant alloys.

Made with ceramic grade Kyon 2100, cutters work at speeds of 3000 sfm to rough mill nickel, cobalt, and iron based heat resistant alloys. Cutters and inserts also machine Waspalloy, Haynes 25, Inconel 718, Stellite and similar materials at cutting speeds of 2000 to 4500 sfm and feed rates of 0.002 to 0.005 ipt. Also available are KC9110 and KC9125 inserts, both with 3 coating layers: TiCN,...

Read More »
Hinge suits hatch type doors.
Hinges

Hinge suits hatch type doors.

Steel Zinc-Plated Hinge is available in 2-part lift-off or 3-part solid versions. Steel and zinc-plated hinge body, hex nut, and serrated washer have blue passivated finish while hinge pin and washers are brass and nickel-plated.

Read More »
Self-Threading Anchor has ICBO listing.
Earth Anchors

Self-Threading Anchor has ICBO listing.

Removable LDT(TM) anchor cuts its own threads into concrete and offers finished hex-washer head with anti-rotation serrations and anchor head stamped with length identification code. Requiring no cure time, anchor installs in two steps: drill a pilot hole; drive anchor into hole with 1/2 in. impact wrench. ICBO listing allows product use in applications where earthquakes are a concern. Suitable...

Read More »
Pipe Hangers protect exposed pipe installations.
Pipe and Tube Hangers

Pipe Hangers protect exposed pipe installations.

Pipe hangers coated with Dura-Green® protective epoxy finish are corrosion-resistant. Dura-Green waterborne epoxy paint is applied by cathodic electro disposition (nine-step process that permanently bonds coating to material). Scratch- and peel-resistant finish outperforms red primer and electro-zinc plated products in standard salt-spray tests conducted in accordance with ASTM B117.

Read More »
Torque Reaction Arms suit various assembly operations.
Arms

Torque Reaction Arms suit various assembly operations.

FlexArm model CVA-10 absorbs 10 lb-ft of torque (max). It can be used as close as 8 in. from where it is mounted to surface and can extend out to 28 in. Its two-piece motor mount will accommodate any assembly tool up to 2 in. in dia. FlexArm model G-60 absorbs 800 lb-ft of torque (max). Its working range is from 20 to 78 in. Other models are available with maximum torque levels of 30, 50, 80,...

Read More »
Tube Connectors suit high-flow applications.
Connectors

Tube Connectors suit high-flow applications.

Barbed tube-to-tube connectors are designed for use with 3/8 and 1/2 in. ID flexible tubing. Tee, Elbow, and Straight Through configurations are available. Components are molded in lot traceable, virgin, medical-grade polycarbonate and have no parting line on critical sealing surfaces.

Read More »
Aluminum Connectors suit freestanding wall applications.

Aluminum Connectors suit freestanding wall applications.

Aluminum Connectors, used on CornerForms(TM) panel connector system, feature formed channels that nest metal standards. They include Corner Posts and Three Way Posts that accept 3/4 in. predrilled countersunk holes. Connectors come in 96 in. lengths. Additional aluminum profiles include tubes, bullnose profiles, channel moldings, poster frame and display stand components, and 90 and 180 deg posts.

Read More »
Cutting Inserts improve efficiency and productivity.
Inserts

Cutting Inserts improve efficiency and productivity.

Aluminum Cutting Inserts are available in WCGT 05 and WCGT 06 sizes to mount into existing OTM HOLESHOT(TM) and HOLESHOT(TM)-IS (Integral Shank) drills. Available in grade 12, inserts feature highly polished surfaces and up-sharp geometry for drilling aluminum. Their polished surfaces reduce coefficient of friction for drilling in soft, gummy material.

Read More »
Instrumentation Fittings handle high pressures.
Fittings

Instrumentation Fittings handle high pressures.

MPI(TM) connectors operate at pressures of 6,000 to 15,000 psi, making them suitable for equipment used to operate feed lines, processing lines, and other systems within industrial labs. Four-part fittings can be used on 316 stainless-steel, cold-drawn, 1/8 hard, unannealed tubing or thick-walled, annealed, instrumentation-grade 316 tubing, and are available for tubing ranging from 1/4 to 1 in....

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers