Sensor/Connector suits production line machinery.
Sensors / Detectors / Transducers

Sensor/Connector suits production line machinery.

Sensor/Connector/Cabling solution includes 10-30 Vdc sensors designed for use with M5 connector. Smooth barrel sensor is 4 mm in dia with rated operating distance of 0.8 mm, while threaded barrel sensor is 5 mm in dia with extended operating distance of 1.5 mm. Stainless steel sensors meet IP 67 specs and have LED built into barrel. M5x0.5 locking ring connector cables have outside connector nut...

Read More »
Machine Mounts withstand corrosive environments.
Mounts

Machine Mounts withstand corrosive environments.

Stainless Steel Machine Mounts support loads up to 13,000 lb and are resistant to harsh bleaches, dyes, and salts. Fixed and swivel configurations are available in sizes from 2-7 in., and in both metric and standard bolts. Applications include industrial machinery, conveyors, and equipment exposed to harsh environments.

Read More »
Photodiode Head fits into tight locations.
Rectifiers and Diodes

Photodiode Head fits into tight locations.

Model PD300-TP laser power measuring head is 4 mm thick and can make power measurements on cw lasers in tight spaces. Sliding filter measures 50 pW to 300 mW and also contains measurement in dBm. Spectral range is 350-1100 nm. Unit provides ±3% accuracy within spectral response range of 400-950 nm. Wavelength calibration is built-in. Model PD300-TP operates on stand or can be hand held.

Read More »
Mounting and Positioning Equipment provide metric options.
Mounts

Mounting and Positioning Equipment provide metric options.

Adjustable-height, rack and pinion posts mount to M16 holes on positioning stages. Adjustable travel distances are 25 or 45 mm. Locking knob secures post's position. Metric laser holders mount helium neon lasers with twin-ring design. Small metric stage measures 24 x 30 mm and provides total travel of ±5 mm in X, Y, and Z directions. Large stage measures 40 x 60 mm, and provides total...

Read More »
Vibration Isolators cushion motherboards and other PCBs.
Mounts

Vibration Isolators cushion motherboards and other PCBs.

Bumper Beans are made of shock-absorbing Silastic® silicone rubber with threaded aluminum nuts/screws integrated into each end. They handle G-force sine waves between 80-250 Hz, reducing force by up to factor of 10. Beans measure 0.75 in. long and 0.55 in. dia. with durometer hardness of 59. Embedded computer systems with EBX, ETX, PC/104 or any other form factor of PCB that is mounted onto...

Read More »
Anchorage Connectors suit concrete applications.
Anchors

Anchorage Connectors suit concrete applications.

Miller® Grip(TM) connectors provide portable, reusable anchor points for use in fall protection and non-fall protection applications. Fall protection series meets single-user and dual-user needs. Temporary horizontal lifeline kit accommodates 2 workers. Connectors that are not for fall protection provide 1,000 lb safe working load or 2,000 lb max workload for use in anchoring scaffolding to...

Read More »
Dry Mount System helps install glass railings.
Brackets

Dry Mount System helps install glass railings.

GlassWedge(TM) permits dry installation of Â-½ in. tempered glass in shoe moulding. It consists of plastic isolator channel, aluminum wedge, and pre-drilled aluminum shoe moulding. Isolators are slipped over bottom of tempered glass and spaced 24 in. on center. Following confirmation of alignment, wedges are hammered into place using GlassWedge(TM) chisel. System self-centers, self-plumbs...

Read More »
Fasteners simplify overhead rod hanging.
Ceiling Suspension Systems

Fasteners simplify overhead rod hanging.

Vertigo system consists of 3 anchors that fasten into concrete, metal, or wood. Each has internally threaded coupling head for 1/4, 3/8, or 1/2 in. diameter rod. Metal and wood anchors also offer side-mount style head for lateral installation of 1/4 and 3/8 in. diameter rod on to joists, columns, and trusses. Applications include HVAC, overhead conduits, acoustical and drop ceilings, and plumbing.

Read More »
Grippers feature rotating jaws.
Grippers

Grippers feature rotating jaws.

Series GRB Grippers come in 12, 16, 20, 32, 40, and 50 mm sizes, and provide up to 180° of total jaw rotation allowing jaws to rotate completely clear of work area. One piece body incorporates 2 mounting surfaces with dowel pin holes to provide accurate mounting in variety of attitudes. Internal shock pads reduce end of rotation shock and ensure quiet operation. Internal speed restriction...

Read More »
Connectors/Maintenance Kits suit confined space applications.
Connectors

Connectors/Maintenance Kits suit confined space applications.

E-Line Compression Terminal Connectors and E-Line Maintenance Kits feature narrow tongue lug and are suitable for space restrictive OEM and repair and maintenance applications. Connectors come in copper or aluminum, and are UL listed 90°C, 600 V to 35 kV. Maintenance Kits include copper or aluminum E-Line Compression Terminal Connectors and heat shrink tubing for proper terminations.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers