Embedment Anchor provides alternative to hooked rebar.
Anchors

Embedment Anchor provides alternative to hooked rebar.

Based on Shear Cone Theory, LENTON® TERMINATOR oversized half coupler secures to end of reinforcing steel and permits rebar to be added without increasing size of component embedded in concrete. Mechanical system minimizes embedment length and facilitates installations. Able to simplify bar placement and reduce rebar congestion by 60%, product utilizes LENTON taper-threaded end and is designed...

Read More »
Angular Grippers feature fully sealed design.
Machine Tool Parts and Accessories

Angular Grippers feature fully sealed design.

Offering adjustable stroke and gripping force up to 2,700 N, GG Series Grippers are sealed against dust, dirt, and coolant, allowing use in machining and grinding environments and wet or dirty applications. Units feature up to 35° stroke per jaw to allow clearance for tooling fingers. Opening angle is adjustable via screw on top of gripper. NC models are available with spring failsafe...

Read More »
Angular Grippers have adjustable opening stroke.
Grippers

Angular Grippers have adjustable opening stroke.

GK Series is comprised of six 180° opening (2 x 90°) angular grippers suited for applications that must be performed within limited work area. Along with 0-180° stroke-limiting screws, product features gripping torques from 40-4,000 Ncm, C45 K steel jaws, and aluminum body. When jaws are completely opened, work piece can be freed without having to retract gripper. From open...

Read More »
Toggle Tongs Grippers offer closing force up to 4,200 Ncm.
Grippers

Toggle Tongs Grippers offer closing force up to 4,200 Ncm.

Designed to hold, squeeze, or cut wires, cables, and chains, Series ZK features hard-coated aluminum housing and chrome-plated hardened steel working parts. Model ZK22 cuts up to 3.5 mm OD copper wire, while Model ZK33 cuts up to 6 mm wire. With gripper in closed position, toggle is extended and guarantees mechanical self-locking. Two pins mounted on jaws can be used with optional mounting blocks...

Read More »
Sponsored

Case Study: Overturned Truck

An evaluation of the causes of the fracture that occurred on a cast suspension mounting of a big rig on a fully loaded truck is covered in this paper. It includes observations of the initial field examination of the mounting along with a picture of the fractured mounting. The findings of the laboratory examination of the fracture surface with a high magnification microscope are presented, and the effects of structural porosity on the strength of the casting are explained, providing images of the high magnification views of the fractured mounting.

Read More »
Dual Action Gripper facilitates O-ring assembly.
Grippers

Dual Action Gripper facilitates O-ring assembly.

Providing up to 1,450 N force, 6-finger GS Series picks up O-rings, expands them to slip over shaft, then ejects them into groove machined into shaft. Operating from 58-145 psi air pressure, 2 pistons that are pneumatically driven independently of each other actuate gripper motions. Standard pin sizes handle O-rings ranging from 4-60 mm diameter. Optional sensing can be accomplished with 2...

Read More »
Mounts

Adjustable Mounts help optimize limit switch accuracy.

With low-profile, 0.197 in. thick LSM Mounts, full-sized and miniature DIN limit switch devices can be adjusted by up to 1.18 in. and 0.50 in., respectively. Using screwdriver for adjustment, accurate switching and sensing is assured. Mounts are fabricated from corrosion-resistant aluminum and include stainless steel fasteners.

Read More »
Mounts

PC Mount helps make space on desktop.

Featuring one-piece design, ThinkCentre® Ultra Small Under Desk Mount can be installed under desk to give user more desktop and floor space. Unit is constructed of high-grade steel, mounts with 4 screws, and facilitates access to media drives and control buttons of PC.

Read More »
Rotary Jaw Grippers are designed to rotate parts.
Grippers

Rotary Jaw Grippers are designed to rotate parts.

To shorten production cycle times, SB Series includes 8 rotating jaws for parallel grippers that have ability to grip and turn parts simultaneously. Sizes range from models capable of handling hypodermic needles to those designed to pick-up and rotate heavy parts such as complete automotive engine blocks. While 3 models use synchronous belt drives, 5 models are geartrain-driven. Torques range...

Read More »
Sealed Parallel Gripper features stable 4-sided guides.
Grippers

Sealed Parallel Gripper features stable 4-sided guides.

Dual-jaw, sealed parallel grippers in GP1800 Series have flat sided jaws and rounded corners sealed against dirt, fluids, and dust. Along with fully sealed guides, products have 4-sided, rectangular shape and are available with multiple sets of air connections and mounting holes. Strokes are available from 3-30 mm, and gripping forces range from 10.5-979 lbf. Grippers are suited for machining...

Read More »
Mounts

Camera Stabilizer accepts cameras from 8 oz to 5 lb.

Weighing 12.8 oz, handheld Merlin is constructed with aluminum alloys and stainless steel weights. Balanced on 3-axis inter-gimbaled handle, it provides precise control over range of focal lengths. Folding Caliper hinge extends and retracts to balance cameras. Multi-tapped dovetail plate features 3-position lever that permits rapid camera mounting and removal from micrometer trim stage, coarse...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics