Panel Mount Connectors feature stainless steel body.
Tool Sockets

Panel Mount Connectors feature stainless steel body.

Available in male and female versions, 763 Series M12 Threaded Sockets are offered with variety of termination styles, including DIP solder contacts, flying leads, and solder-cup contacts. Protection rating of IP68 is achieved through use of panel sealing O-rings and potting compound, which fills termination area. Provided in 4, 5, and 8 pole versions, connectors can be front or rear mounted.

Read More »
Bearings

New Grades of Meldin® Polyimide Materials

The Polymer Products Business of Saint-Gobain Performance Plastics has recently developed a grade of Meldin® materials for highly demanding applications in which metal and other materials will not perform adequately. Applications include thrust washers, sealing rings, bearings, and fork pads. The Meldin® 3100 series offers 4 tribological grades that satisfy application needs of high...

Read More »
Anchors

Drywall Anchors hold up to 75 lb.

Made with fiber-reinforced resin, E-Z Anchor® Twist-N-Lock(TM) Anchors install flush against drywall to ensure that item hung lies flat and does not wobble. Split-and-grip technology let user know with audible click that anchor is locked into wall. Click indicates that anchor legs have split and are compressing drywall, reinforcing installation. Eliminating need for pre-drilling, anchors...

Read More »
Torque Arm uses pneumatic cylinder to help move tools.
Arms

Torque Arm uses pneumatic cylinder to help move tools.

Designed to help minimize operator fatigue, Heavy-Duty Torque Arm securely maintains tool location while allowing smooth movement of assembly tools in both up-down motion and 180° side-to-side motion. Unit also helps absorb torque to minimize potential for operator injury to arm, wrist, or hand. Mounting to bench top via bolts or bench clamp, torque arm accommodates inline pneumatic and...

Read More »
Pneumatic Parallel Grippers handle wide and large parts.
Grippers

Pneumatic Parallel Grippers handle wide and large parts.

Available in 10 sizes, AGW Parallel Grippers provide 50-150 lb of gripping force and come in 6 strokes of 0.75, 1.00, 2.00, 2.50, 4.00, and 6.00 in. Sealed design repels chips and contaminates from internal mechanism. Each jaw is supported by 2 full shafts through length of body. Featuring rack and pinion design, grippers are offered in synchronous or non-synchronous models with independent jaw...

Read More »
Pneumatic Grippers are suitable for dirty environments.
Grippers

Pneumatic Grippers are suitable for dirty environments.

Parallel Pneumatic Grippers provide rigid gripping of large and wide parts in machining environments. Features include sealed chip-repellant design, rack and pinion grippers, dowel pin holes, and dual full-shaft jaw support. Units are available with Â-¾, 1, 2, and 6 in. stokes, 4 different bore sizes, and gripping forces ranging from 50-150 lb. Options include synchronous or non-synchronous...

Read More »
T-Slot Framing System offers stainless steel leveling feet.
Feet

T-Slot Framing System offers stainless steel leveling feet.

T-slotted aluminum framing system, The Industrial Erector Set, accepts leveling feet. Eight bases made from 304 SS are available with or without floor mount holes, in diameters of 30-120 mm, with load capacities up to 8,800 lb and anti-slip rubber pads. Additional options for feet include choice of stainless steel threaded stems in 15+ different lengths, available in metric sizes from M8-M20 and...

Read More »
Fan Mount fits industry standard DC fans.
Mounts

Fan Mount fits industry standard DC fans.

FMB series Fan Mount, Breakaway Style has elastomeric, evenly spaced ribs for mounting fans of many different heights. It features pull-through, breakaway installation tabs that break away cleanly after installation for low profile panels. RoHS compliant fan mounts offer noise and vibration reduction and reduce amount of hardware needed for assembly.

Read More »
Grippers

Two-Finger Parallel Gripper operates in harsh conditions.

Series DPG-plus Sealed 2-finger parallel grippers handle small components in extreme environments. Gripper offers IP67 contaminant protection and operates in rough, dirty, abrasive-dust filled, and underwater environments. Other features include serrated guidance, oval piston wedge-hook base jaw design, hoseless direct air supply, and gripping forces of up to 110 N. Unit can be flexibly attached...

Read More »
Connectors

Simrit Introduces Plug & Seal Connections to the Americas

Single Part Connector Offers Fast Fit, Greater Reliability and Longer Life at Lower Cost PLYMOUTH, Mich., Feb. 28, 2007 - To help manufacturers build more robust products at less cost, Simrit, the industrial sealing products division of Freudenberg-NOK, is bringing its proven Plug & Seal plug connection technology to the Americas. Simrit's Plug & Seal connectors are specially designed to provide...

Read More »
Locon Sensors Withstand Extreme Temperatures
Sponsored

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers