Compact Encoder offers stability in design.
Flanges

Compact Encoder offers stability in design.

Providing feedback in applications typically using modular encoders, QR12 with 1.280 Bolt Circle Mounting Flange features 1.2 in. OD and overall height of over 1 in., and offers stability of bearing encoder design. Outputs consist of quadrature with index pulse and 3-phase commutation. Flexible member enables tail shaft run-out and provides 30° of rotation for commutation timing, providing...

Read More »
Vibration-Damping Breadboards suit OEM applications.
Mounts

Vibration-Damping Breadboards suit OEM applications.

Available in 4 standard configurations, breadboards provide flat, stable surface for mounting or assembling lasers/small optical systems, prototyping, and precise inspections. Each configuration features natural frequency, nominal broadband damping and flatness of ±0.004 in. over 24 x 24 in. area. Depending on series, nonmagnetic and ferromagnetic products feature extruded aluminum or...

Read More »
Testers

Multiport Test Adapter facilitates MIMO testing.

Multiport Test Adapter (MPTA) enables comprehensive composite EVM and fast-switching testing on multi-channel MIMO devices through one-box test instruments. Allowing OEMs and ODMs to minimize manufacturing implementation test times, this adapter offers an operating range of 2-6 GHz and addresses both 802.11n WiFi and 802.16e Wave 2 WiMAX products. Features include direct RF connections to DUT and...

Read More »
Miscellaneous Boards

Interposer Card accelerates 2.5 in. SATA drive integration.

Offered as turnkey board solution, SS9135 provides OEMs with means to implement 2.5 in. SATA drives in enterprise-class storage arrays, including SAS and Fibre Channel-SATA (FC-SATA) infrastructures, for near-line and tiered-storage applications. Solution is based on SS1350 Active-Active Multiplexer, which enables single-ported SATA drives to connect like native dual-ported drives. Card also...

Read More »
International Cord Ratings
Sponsored

International Cord Ratings

Explaining the theory behind the sectional approval of a power cord, this paper points that the cord is approved separately in different sections like the plug, the wire, and the connector. It highlights that even though all countries are using the same IEC (International Electrotechnical Commission) standards the perfection of approval agencies could be different. The paper details that according to IEC 60799 5.2.2., the connector rating should always be less than that of the attached plug, and briefs why the plug and the wire are approved, but not the connector along with a few examples. It reviews how the cord ratings differs from North America and other countries, and also details how one can find a cord that's approved for those countries with a C19. Paper concludes that having a plug with higher rating could aid the approval of C19 connector in most countries.

Read More »
Expanded Torque Selection Enhances Position-Control Hinge Flexibility
Controls and Controllers

Expanded Torque Selection Enhances Position-Control Hinge Flexibility

Concordville, PA, May 7, 2007 - Southco has recently expanded its line of CEMA E6 constant torque position control hinges to provide greater torque-control functionality across a range of applications-industrial and electronics enclosure doors, contoured headrests for automotive and airplane seats, and LCD display screens found on medical or industrial equipment. The ability to position and hold...

Read More »
Parallel Gripper offers 2,200 N of gripping force.
Grippers

Parallel Gripper offers 2,200 N of gripping force.

With total finger stroke of 11.8 in., Model PFH 150 2-finger parallel gripper is designed for handling large and heavy components. It provides finger opening and closing times of 0.8 sec due to end position damping that also ensures quiet return to end position. Air supply can also be connected without hoses, and unit can be attached on 2 sides in 3 screw directions. Product features pneumatic...

Read More »
Miscellaneous Fixtures

Modular CMM Fixturing

EASTEC Exhibitor Product Release - 3/23/2007 Modular CMM Fixturing TE-CO now offers a complete line of modular CMM fixturing in Â-¼-20 for holding parts during inspection. Within this system, we offer fixture plates, fixture towers, a wide selection of standoffs and pin rest pads, magnetic rest pads, and soft touch clamps. Our hard coat, black anodized aluminum CMM fixture plates have...

Read More »
Hand (Tool) Clamps

DE-STA-CO to Bring Fresh Perspective to EASTEC 2007 with Horizontal Clamping Series

Auburn Hills, Michigan, March 1, 2007 - DE-STA-CO's booth at EASTEC 2007 will feature the Horizontal Handle Hold-Down Action Clamps, the company's latest generation of manual toggle clamps. Also located in booth #5854 will be the DE-STA-CO® Toggle Lock Plus manual clamps, as well as DE-STA-CO Robohand's RZA Table-Top Linear Thruster Slide and DPW Parallel Gripper. EASTEC 2007 Exposition...

Read More »
Mounts

Vibration Isolation Workstation can be used in cleanrooms.

Class 100 cleanroom compatible Model MK26 workstation utilizes Minus K® stiff spring and negative stiffness mechanism to achieve low net vertical stiffness without affecting static load supporting capability. It achieves isolation efficiencies of 93, 99, and 99.7% at 2, 5, and 10 Hz, respectively and has 650 lb gross load capacity. Tabletops can be ordered in 30 x 36 in. and 36 x 48 in....

Read More »
Kits

Enviro Voraxial Technology is a Featured Exhibitor at a Major Oil Industry Conference in Scotland

FORT LAUDERDALE, Fla., April 18 - Enviro Voraxial Technology, Inc. (BULLETIN BOARD: EVTN.OB) announced today that the Company is a featured exhibitor at the Advanced Produced Water Handling & OSPAR Compliance 2007 Conference. The conference is being held April 24-25 in Aberdeen, Scotland. The Company will demonstrate the oil/water separation performance of its Voraxial® 1000 Separator....

Read More »

All Topics