Stepper Motors

Stepper Motors have chrome platens.

Linear stepper motors travel at speeds to 80 in./sec, with strokes to 144 in. and acceleration to 1G. 2- and 4-phase linear steppers are capable of up to 50 lbs continuous force and 65 lbs peak force. Resolution of 2-phase motors is 1 full step equals .010 in., and 1 microstep equals .00004 in. Resolution of 4-phase motors is 1 full step equals .005 in., and 1 microstep equals .00002 in. Motors...

Read More »
Dustproof Motor locks out contamination.
Motors

Dustproof Motor locks out contamination.

Abrasive Dustproof Series, sealed with built-in o-rings, has air fittings for pressurization up to 15 psi. Shaft slinger prevents abrasive dust from attacking shaft seal material, which in turn prevents dust from entering bearing. Motor is available in standard 23, 34, 42 and 65 frame sizes. Applications include industrial operations that use, produce or process powdered materials such as fiber...

Read More »
Miniature DC Motors are 16mm in diameter.
DC Motors

Miniature DC Motors are 16mm in diameter.

16G88 Series DC ironless-rotor motors have continuous power rating of 4.5 W. They are available with choice of 6 windings for supply voltage from 3 to 24 V. Maximum recommended shaft speed is 12,000 rpm, and typical maximum continuous output torque is 5 mNm. All incorporate precious metal commutators and sleeve bearings. Matching 16mm dia planetary and spur gearheads are available with ratios...

Read More »
Motors

Vertical Pump Motor directly replaces less efficient motors.

Mod-Max meets NEMA premium motor efficiency standards, operates 0.8 to 4.0% more efficiently than company's older, less efficient motors, and can be used for VFD applications. Canopy cap requires no gasket and has 3 stand-offs to allow air circulation to help prevent moisture condensation. Winding includes pulse endurance wire. Each winding is also treated with 100% solids insulation material....

Read More »
Gearmotors/Speed Reducers operate at 95%+ efficiency.
Gearmotors

Gearmotors/Speed Reducers operate at 95%+ efficiency.

90.1 Series helical bevel gear products are available as triple- or quadruple-reduction drives with foot, flange, or shaft mount configurations. They offer power ranges from 1/6 to 200 HP, output speeds from 0.1 to 218 rpm, torque up to 283,200 lb-in., and gear ratio ranges from 8.04:1 to over 300,000:1. Unicase(TM) housing eliminates oil leakage and contamination. Autovent sealing prevents...

Read More »
DC Motor is suited for light duty belt conveyors.
DC Motors

DC Motor is suited for light duty belt conveyors.

Micro-Motor 24V brushless DC geared motor has right angle design that fits into 2 3/4 in. conveyor frame. Gearbox transfers 99% of motor output power to belt drive pulley. Driver card controls and activates motor allowing varying conveyor speed and change of travel direction. Micro-Motor has torque rating up to 112 in. lbs and can drive 1.9, 2.25 or 2.5 in. belt drive pulleys. Drive system moves...

Read More »
22mm DC Motor promotes heat dissipation.
DC Motors

22mm DC Motor promotes heat dissipation.

LO-COG 22mm brush-commutated DC motor is 1.900 in. in length and employs 5-slot armature design and bonded neodymium iron boron magnets. It is suitable for mass data storage and semiconductor processing equipment. Standard cartridge assemblies prolong brush life by maintaining optimum brush force.

Read More »
Stepping Motor Drive IC operates in -20 to +75° C range.
Stepper Motors

Stepping Motor Drive IC operates in -20 to +75° C range.

Model FAN8200 2-channel drive IC is manufactured using bipolar process. Integrated dual H-bridge drivers with vertical PNP power transistors result in low saturation voltage (0.4V @ 0.4A) and optimum thermal characteristics (Vcc = 2.5V ~ 7.0V). Unit features built-in shoot-through current protection and thermal shutdown (TSD) function. FAN8200 accommodates 3.3 or 5V MPU control input, and...

Read More »
Motor-Driver Packages are available with size 34 motor.
Stepper Motors

Motor-Driver Packages are available with size 34 motor.

CSK Series features size 34, 2-phase, hybrid stepping motor and compact board level driver. Holding torque values vary from 305 oz-in. for CSK296-ATA to 916 oz-in. for CSK2913-ATA stepping motors. Driver packages produce drive currents of 4.0 and 4.5 A per phase. They include automatic current cutback function. Step angle select switch allows user to select full step (1.8°) or half step...

Read More »
AC motors can replace PMDC motors.
Motors

AC motors can replace PMDC motors.

MicroMAX(TM) line of low horsepower ac inverter duty motors are direct replacement for permanent magnet dc (PMDC) systems. Available in l/4 to 3 hp, C face motors have same mounting configuration as PMDC counterparts, including foot print, flange dimensions, shaft length, and diameter. They can be equipped with PWM scalar drive.

Read More »

All Topics