Motion Control IC outputs 12-bit analog or PWM signal.
Miscellaneous Controllers

Motion Control IC outputs 12-bit analog or PWM signal.

Designed to replace existing HCTL-1100 IC from Avago, Model MCP-1200 offers single axis motion control solution for servo and stepper motors, and can be synchronized with multiple chips for multi-axis applications. All low-level fast computations are performed on IC, freeing up host microcontroller for supervisory tasks. No external memory is required, just incremental encoder to provide position...

Read More »
Material Processing Mills

ABB's System 800xA Will Help Double Production at Europe's Largest Copper Mine

ABB's Extended Automation System 800xA is part of a comprehensive solution that will help double annual production capacity at Boliden's Aitik copper mine in Sweden and extend the productive life of the site by an additional 25 years Zurich, Switzerland, April 8, 2009 - A comprehensive ABB power and automation solution - including the world's most powerful gearless mill drives, and System 800xA...

Read More »
Fan Drives and Controller reduce fuel consumption and noise.
Miscellaneous Controls

Fan Drives and Controller reduce fuel consumption and noise.

Designed to aid in cooling of hotter-running, reduced-emission engines, VMaster® and Stratis(TM) Di Viscous Fan Drive and Controller systems offer precision, variable-speed performance. Endurance-tested VMaster Di responds rapidly to changing cooling requirements and offers optimized torque transmission and fan idling speed. Stratis Viscous Fan Drives feature reservoir, actuator, and valve...

Read More »
Intelligent Servo Drive reaches up to 600 W peak power.
Servo Motor Controllers and Drives

Intelligent Servo Drive reaches up to 600 W peak power.

Measuring 65 x 58 x 19 mm, Model IBL3605 embeds motion controller, drive, and PLC in one unit and can control brushless, step, DC, or linear motors up to 180 W. Unit can be used as network drive in distributed motion systems using CAN/CANopen interface, or as standalone motion controller for single-axis control. Motion programming is done from CANopen master via PC/PLC using appropriate motion...

Read More »
OEM Motor Drive provides positioning control.
Miscellaneous Controllers

OEM Motor Drive provides positioning control.

Measuring 54 x 28 x 9 mm, Model EPOS2 36/2 controls brush DC motors as well as brushless EC motors, and is suited for single-axis and multiple-axis applications of miniature size. Plug-in module can be operated as speed controller or current controller in addition to position controller. Providing 36 V, 2 Amp operation, drive is designed to command and control within CANopen network, but can also...

Read More »
Stepping Motors/Drives suit motion control applications.
Stepper Motor Controllers and Drives

Stepping Motors/Drives suit motion control applications.

Available in NEMA 17, 23, and 34 sizes, SureStep Stepping Motors include bi-polar models with output torques from 61-1,291 oz-in. Units feature pigtail cable with locking connector and 200 steps/revolution. Advanced Programmable SureStep Drives offer software-selectable resolution up to 51,200 steps/revolution and power capability up to 10 A/phase. Available for drives and motors, unregulated...

Read More »
Brushless Motors/Controls suit adjustable speed applications.
DC Motors

Brushless Motors/Controls suit adjustable speed applications.

Available with standard NEMA face/foot mount, BSM25C and BSM33C Motors range from Â-¼-3 hp. BMC Series controls, using standard 115/208/230 Vac, require no programming and provide tight speed regulation of better than 0.5%. Units use industry standard input command of ±10 Vdc or optional pot input for speed control. Housed in fully protected package, combination of BSM motor and BMC...

Read More »
Motor Driver enables camera phone autofocus and zoom.
Motor Controllers and Drives

Motor Driver enables camera phone autofocus and zoom.

Operating in temperatures from -40°C to +85°C, A3907 Voice Coil Motor Driver features voltage range of 2.3-5.5 V with maximum output current of 102 mA. Output current is programmed via I2C interface in 100 Â-µA increments and unit features input supply current of less than 100 nA in sleep mode. Programmable output current slew rate control minimizes ringing and settling time....

Read More »
Stepper Motors

Microstepping Motors/Drivers suit high-torque applications.

RBK series 2-phase microstepping driver and motor packages include round shaft versions of PK-P motors with 1.10, 1.38, and 1.65 in.Â-² frame sizes as well as Planetary Geared motors with 1.65 and 2.36 in.² frame sizes. Standard encoder motors have been added to 1.38, 1.65, 2.22, and 3.35 in.² round shaft motor frame sizes, and encoders are available with 200/400 lines and...

Read More »
Stepper Motor Controllers and Drives

Microstepping Motor/Drivers offer encoder options.

CMK Series 2-phase microstepping drive and motor packages include 2.22 in.Â-² round shaft frame size version of PK-P motor as well as standard encoder models with 1.38, 1.65, 1.97, and 2.22 in.² round shaft motor frame sizes. Encoder models are available with 200 or 400 lines and 2 or 3 channels, and motors featuring 1.8°/step and 0.9°/step resolutions are available with...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers