Motion Sensors / Detectors / Transducers

Motion Sensors / Detectors / Transducers

Capacitor Accelerometer suits navigation applications.

Available in 5 x 5 x 1.2 mm DFN plastic package, Model KXR94 can be programmed to ±1 g range on all 3 axes. It also features low noise density, reducing double integration errors. RoHS compliant unit consumes less than 1 mA at 3.3 V, and can be factory programmed to accept supply voltages from 2.5-5.25 V and sensitivity from ±1 to 5 g. Suited for consumer electronics and automotive...

Read More »
Motion Sensors / Detectors / Transducers

Digital Pyrodetector provides EMI immunity.

Featuring quad-element design, triple-channel DigiPyro(TM) PYQ 2898 has 2 pairs of elements representing 2 channels and additional temperature reference channel. Housed in 3-pin TO-5 package, unit offers 42-bit output direct link. It can be utilized in range of home and industrial motion detection applications including intrusion alarms, motion-activated light switches, and door openers.

Read More »
Optical Sensors are qualified to AEC Q101 standard.
Motion Sensors / Detectors / Transducers

Optical Sensors are qualified to AEC Q101 standard.

Featuring Moisture Sensitivity Level rating of 1, single-channel Model TCPT1300X01 has 0.3 mm aperture and 3.0 mm gap, while dual-channel Model TCUT1300X01 features two 0.3 mm apertures and 3.0 mm gap. Both surface mount, transmissive units provide phototransistor output and operate at wavelength of 950 nm. With temperature range of -40 to +85°C, sensors are RoHS-compliant, free of...

Read More »
Motion Sensors / Detectors / Transducers

Optical Sensor prevents traffic crashes in urban areas.

By scanning up to 10 m in front of vehicle, closing velocity (CV) sensor helps drivers completely avoid or reduce severity of collisions when traveling at speeds under 25 mph. If calculated distance determines imminent collision, system responds by putting brakes on alert mode to ensure sufficient pressure for stopping. System also initiates automatic braking up to 0.5 g if driver takes foot off...

Read More »
Accelerometer monitors vibration in high-temperature areas.
Motion Sensors / Detectors / Transducers

Accelerometer monitors vibration in high-temperature areas.

Industrial-grade Model 600A13 outputs 100 mV/g acceleration signal from its integral differential charge converter, allowing it to be used with ICP® sensor signal conditioners and data collection equipment. With temperature rating of +900Â-ºF at sensor head, product can be used to monitor vibration in applications where elevated surface or ambient temperatures are of concern....

Read More »
Motion Sensors / Detectors / Transducers

Wind Measurement Instruments suit commercial applications.

Able to record speeds in excess of 200 mph, wind speed sensors are available with voltage, frequency, or pulse counting outputs and feature black Lexan cups that resist and shed ice. Handheld anemometer, offered in battery (DIC-3) and self-powered (BTC) models, features 3 cups to obtain accurate readings regardless of position. Also available, wind alarms provide warning for and control of...

Read More »
Motion Sensors / Detectors / Transducers

CrossTec Integrates Third Brigade Host Intrusion Prevention System (HIPS) with Activeworx Security Information and Event Management (SIEM) Solution

CrossTec joins Third Brigade SIEM integration program Ottawa, ON, Reston, VA, and InfoSecWorld Conference and Expo 2007 Booth #622, Orlando, FL March 19, 2007 -- Third Brigade (www.thirdbrigade.com), a security software company that specializes in host intrusion prevention systems, today announced its HIPS product has been integrated with CrossTec Activeworx Security Center, a high value, low...

Read More »
New Decora® Manual-On Occupancy Sensor Features Versatile Control Options and Interoperability with Other Leviton Lighting Controls
Motion Sensors / Detectors / Transducers

New Decora® Manual-On Occupancy Sensor Features Versatile Control Options and Interoperability with Other Leviton Lighting Controls

Little Neck, NY, November 8, 2006 -- Leviton's newly redesigned Decora® Manual-ON Occupancy Sensor (Cat. No. IPP15) adds to the control capabilities of the company's earlier Decora® Manual-ON Occupancy Sensor (Cat. No. IPP10) with its higher 15 Amp rating and the ability to interoperate with other of Leviton's distinctively styled lighting control products. Like the IPP10, once manually...

Read More »
Motion Sensors / Detectors / Transducers

Vehicle Safety Sensor continuously detects angular rate.

MicroGyro(TM) features internal double-ended tuning fork, machined at microscopic level of pure crystalline quartz, to promote rate sensing precision as well as resistance to temperatures up to 125°C. Sensor features Continuous Built-In Test(TM) technology that performs self-diagnostic evaluations while simultaneously sensing angular rate. Unit also features fully compensated 3.3 or 5.0 V...

Read More »
Motion Sensors / Detectors / Transducers

NaturalPoint Takes Control of Motion Sensing Technology at GDC 2007

CORVALLIS, Ore., Feb. 28 - NaturalPoint Inc., will be exhibiting at the Game Developers Conference (GDC) from March 7-9 at the Moscone Center in San Francisco. NaturalPoint's cutting edge devices exemplify the "Take Control" theme of this year's GDC, by evolving computer input beyond keyboard, mouse, and joystick. The TrackIR system turns any game player's upper body into a precise controller...

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics