Motion Sensors / Detectors / Transducers

Motion Sensors / Detectors / Transducers

Future Electronics Promotes the ZMOTION PIR-based Motion Detection Solutions from Zilog

Pointe Claire, QuebecÂ- — Future Electronics, a global leading distributor of electronic components, promotes Zilog's ZMOTION PIR-based motion detection solutions. Zilog offers a wide selection of lens and pyroelectric sensor bundled options for a variety of application needs. For intrusion applications, the Z8FS021 is ideal for a wide-area intrusion detectors, corridors, curtain &...

Read More »
Lighting Control Sensors help building operators conserve energy.
Motion Sensors / Detectors / Transducers

Lighting Control Sensors help building operators conserve energy.

Intended for interior applications, LightHAWK2™ wall switch vacancy and occupancy sensors are available withÂ- Passive Infrared (PIR), Ultrasonic (US), and Dual Technology (US and PIR) motion sensor technologies. Other versions include LightHAWK2™ Dimming PIR Sensors, featuring 0–10 V dimming; LightHAWK2™ Night Light PIR Sensor, which combines PIR technology with night-light;...

Read More »
Inertial Measurement Unit consumes
Motion Sensors / Detectors / Transducers

Inertial Measurement Unit consumes

Designed for always-on, 6- and 9-axis applications, BMI160 integrates 16-bit, 3-axis, low-g accelerometer and 3-axis gyroscope into one 14-pin 2.5 x 3.0 x 0.8 mm LGA package. IMU synchronizes inertial accelerometer and gyroscope sensor data with external geomagnetic sensor data, and current consumption is 950 Â-µA typ when accelerometer and gyroscope are in full operation. Features include...

Read More »
Laser-Based Sensor enables non-contact vibration measurement.
Motion Sensors / Detectors / Transducers

Laser-Based Sensor enables non-contact vibration measurement.

Delivering optimal results on every measurement surface regardless of environmental conditions, MSL-7000 series measures vibration and structure-borne noise from fans, electric motors, and pumps. Design employs contactless velocity proportional sensor and is suited for process-integrated, end of line acoustic inspections of noise-critical equipment. Covering acoustic measurements form 0.2 Hz to...

Read More »
Rugged Vibration Sensor detects over/under conditions.
Motion Sensors / Detectors / Transducers

Rugged Vibration Sensor detects over/under conditions.

Supplied in NEMA 4X-rated, cast aluminum enclosure that measures 3.94 x 2.56 x 1.66 in., ENVIROMUX-VSSR-10 registers over- or under-vibration in machinery. Over/under alarm sensitivity is adjustable from 0.1–2.2 ips rms, and operating range is -40 to +185°F. Able to connect to ENVIROMUX-2D/5D/16D Enterprise Environment Monitoring Systems, sensor can monitor minimum vibration frequency of...

Read More »
Motion Sensors / Detectors / Transducers

Vibration Sensors are designed for high-temperature operation.

Available in ultra-compact housings, top-exit, and side-exit for flexible cable connectivity, Wilcoxon Research® HT (high temperature) series provides continuous output for condition monitoring applications where temperatures reach 150°C. Internal components are rated at 200°C for consistent bias output voltage levels over entire temperature range. Carrying 25 year MTBF rating,...

Read More »
Motion Sensors / Detectors / Transducers

Intrusion Detection Sensor features fence-mounted design.

With 3 m location accuracy, FlexZone™ detects and locates any attempt to cut, climb, or otherwise break through fence. Ranging fence-mounted sensor can detect multiple simultaneous intrusions, even in presence of background environmental noise. Unit supports 1,968 ft of sensor cable per processor, creates zones through software, and carries power/data on sensor cable. To facilitate...

Read More »
Eddy Current-Based Sensor System is fail-safe up to 285°C.
Motion Sensors / Detectors / Transducers

Eddy Current-Based Sensor System is fail-safe up to 285°C.

Optimized for thin turbine blades made from aluminum or titanium, turboSPEED DZ140 measures rotational speed of turbochargers in bench and field tests. This eddy current-based revolution counter is thermally stable and suitable for speed measurements from 200–400,000 rpm. Exhibiting immunity to interference in harsh test conditions, 3 mm diaÂ- sensor integrates temperature measurement...

Read More »
Shock and Vibration Detector optimizes drilling productivity.
Motion Sensors / Detectors / Transducers

Shock and Vibration Detector optimizes drilling productivity.

Adding shock and vibration measurement capabilities to Tensor Directional Module, Directive™ System optimizes drilling penetration rates by enabling adjustments and corrections to be made based on real-time data. Real-time management of downhole vibrations also minimizes equipment damage, helping to avoid potential well-drilling delays. Operating at up to 175°C, system combines processor,...

Read More »

All Topics