New PMVA Displays are Made to Custom Specifications
Microtips has released a new line of Passive Matrix Vertical Alignment (PMVA) displays. These displays can be custom made to customer specifications. Their features include dark black backgrounds, suitability for all backlights, high brightness and contrast, sunlight readability, and wide temperature ranges.
Read More »
Atlantic Ultraviolet Corporations New Digital Monitors Can Be Directly Mounted or Used Remotely
A new digital line of monitors has been added to Atlantic Ultraviolet Corporations GUARDIAN line of ultraviolet monitors. The new monitors can be directly mounted to a water purifier or used remotely, and are available in either 12v or 110/120v versions. The unit measures the UV-C output of germicidal lamps and can detect any reduction in ultraviolet levels. The device also features an internal...
Read More »
New Touchscreen Tek-CARE Monitor by TekTone Allows Staff to View and Interact with Calls
The new NC403TS touchscreen monitor by TekTone allows staff to view and interact with calls from their full Tek-CARE systems. The monitor was designed to simplify viewing calls on their TEK-CARE networks. The monitor features a 22” touchscreen that annunciates call activity and utilizes the familiar Tek-CARE interface. The NC403TS is unobtrusive and can be placed anywhere in a facility to...
Read More »
FCI Launches FS10i Flow Switch Monitor for Optimizing Air Flow and Reducing Compressed Air Energy Costs
FS10i Flow Switch Monitor from Fluid Components International allows proper measurement of compressed air flow lines. The monitors are designed for simple insertion into threaded tees in 0.5-inch or larger diameter pipe. Its 4-20 mA flow monitoring output is ideal for both increasing and decreasing changes in flow rate, operating over a wide flow range from 0.25 FPS to 400 SFPS. The FS10i...
Read More »
3 Steps to Maximize Your Company's Cash Flow
This white paper provides an overview into maximizing cash flow for your company.
Read More »
New Ultra-Thin Curved Bezel-Less Monitors Come with AMD FreeSync Compatibility
Viotek Ultra-Thin Curved Bezel-Less Monitors are offered in NB24C, NB27C, NB32C and GN27C2 models in sizes ranging from 24 to 32 in. with distortion-free 178-degree viewing angle and 1920 x 1080 p resolutions. The NB series displays offer a viewing experience with 1800R curvature and a refresh rate of 75 Hz. The unit’s 16:9 VA panels deliver dynamic contrast of 1M:1, 16.7M colors and 96 percent...
Read More »
New PurgEye Desk Weld Monitor Comes with Automatic Fault Finding Diagnostics
The PurgEye® Desk Weld Monitor is engineered with PurgeNet™ for inline connection of accessories. It can read oxygen levels from 1,000 ppm and down to levels as low as 1ppm for an oxide free zero colour welds. The unit is suitable for measuring oxygen levels during the welding of titanium and reactive metals such platinum zirconium, Tantalum and stainless steels. The automatic fault finding...
Read More »
Latest CJG5 Curved Gaming Monitors Provide a Contrast Ratio of 3000:1
Samsung’s CJG5 Curved Gaming Monitors are available in C32JG5 and C27JG5 models with a WQHD resolution (2,560 x 1,440). The units are offered with VA curved panel and three-sided bezel-less design. They feature a refresh rate of 144 Hz and showcase an 1800R curvature, which reduces the eye fatigue. The monitors are operated in game and cinema modes that automatically optimize black gamma level,...
Read More »
New PurgEye 100 Inert Shielding Gas Monitor Comes with Vacuum-Sealed Leak-Tight Probe Assembly
The PurgEye® 100 Inert Shielding Gas Monitor is designed for achieving zero colour, oxide free welds in stainless steel and reads accurately from 20.94% atmospheric oxygen levels. The unit is rated to IP65 standards and features leak-tight push buttons, auto calibration options, wrist/neck strap and tripod mount long life sensor. This monitor is equipped with an easy to read 24 mm high LCD...
Read More »
New PurgEye Nano Weld Purge Monitor Comes with Leak-Tight Connectors
PurgEye® Nano Weld Purge Monitor® is designed for weld purging applications where data logging, alarms and machine controls are not required. Unit is equipped with a long life sensor featuring warm up time under 60 seconds. PurgEye Nano measures oxygen levels accurately up to 10 ppm. Unit can be used for checking purge gas quality and to find air leaks in purging hose connections.
Read More »
New Orion Air Quality Monitors Can be Used in Micro-Climates with Complex Terrains and Urban Areas
Orion Air Quality Monitors are designed for measuring nitrogen dioxide, sulfur dioxide, carbon monoxide, and ozone with parameters such as humidity, air pressure, and temperature. Unit’s monitoring is performed using MicroServer that provides internet and industrial protocols, datalogging capability and ports for wind, solar radiation, and/or precipitation sensors. Orion AQM Plus units offer...
Read More »
Reduce Time to Market, Improve System Uptime with Dedicated Computing Medical Solutions
Embedded computing solutions from Dedicated Computing are designed to meet unique and specific requirements. As the preferred supplier to leading healthcare OEMs, the Dedicated Computing team of expert engineers gets your product out to the market faster while helping your company avoid costly validation and verification steps. Check out our video to learn more.
Read More »
