Injection Molding Service manufactures 3D metal parts.

Injection Molding Service manufactures 3D metal parts.

By utilizing Xyloy(TM) metal alloy, metal parts can be injection molded on standard machinery and in tools designed for plastic. Finished parts can be textured or have standard finishes. In addition, molded parts can be painted and powder coated. Company will manufacture parts for OEMs that are seeking to find more productive ways to produce metal parts, or replace under-performing plastic parts...

Read More »
TPE for Peugeot Cowl Vent Seal Provides Rare Combination of Moldability, Weather-Resistance, and Rubber-Like Performance

TPE for Peugeot Cowl Vent Seal Provides Rare Combination of Moldability, Weather-Resistance, and Rubber-Like Performance

Swiss Company Weidmann Over-Molds Tekron® Compound from Teknor Apex on 1.5-Meter Cowl Vent with Innovative Molded-In View Port RAPPERSWIL-JONA, SWITZERLAND, November 6, 2007: For the cowl vent seals on two series of Peugeot automobiles, a leading injection molding company based in Switzerland has specified a Tekron® thermoplastic elastomer (TPE) compound supplied in Europe by Chem Polymer, a...

Read More »

Johnson Controls Simplifies Production of Soft Touch Surfaces

BURSCHEID, Germany, October 30 Faster Way to Produce High-End, Sandwich Parts Johnson Controls, one of the world's leading suppliers of automotive interior systems, electronics and batteries, is the leading engineering partner behind the plastics industry's Dolphin consortium, and the driving force behind an innovative, dual component injection-molding process for automotive interior parts. The...

Read More »

Injection Moldable Elastomer forms resiliant vehicle parts.

Designed to automotive engine temperature, fuel, and oil resistance specifications, Silastic® 100% Fluoro Liquid Silicone Rubber (F-LSR) enables parts to operate consistently while in contact with aggressive fuels, chemicals, lubricants, and oils. Parts manufactured with this fully fluorinated, 2-part solution can also withstand temperatures from -60 to +220°C.

Read More »
Aptiv(TM) Film Made from Victrex® Peek(TM) Polymer Enhances Design of America's Cup Racing Yacht

Aptiv(TM) Film Made from Victrex® Peek(TM) Polymer Enhances Design of America's Cup Racing Yacht

United Internet Team Germany Unveils GER 89 its New State-of-the-Art Yacht West Conshohocken, PA - (September 12, 2007) - United Internet Team Germany entered this year's challenge for the America's Cup with a newly designed yacht, GER 89, featuring Victrex APTIV(TM) film to protect intensely stressed parts. APTIV film, made with VICTREX® PEEK(TM) polymer, was selected for its extreme...

Read More »

Prototype Machining combines injection molding and metal.

Blending injection molding with HTCC alumina systems, capabilities include metallization with refractory metal or platinum conductors, nickel and gold plating as required, and ceramic material options. Metal components may be attached with high-temperature braze, and complex 3D shapes are possible without additional machining. Tooling turnaround promotes feasibility for prototype and small...

Read More »

Lauren Manufacturing Provides Plastics Products

New Philadelphia, OH - May 10, 2007 - Spurred by growing customer demand for plastics, Lauren Manufacturing has announced additional product offerings to its production of thermoplastic and other flexible and rigid materials. This expansion complements the company's well-developed polymer offerings, including extruded rubber, silicone and molded products. Growth of our materials portfolio...

Read More »

R&D Molders, Inc. Polycarbonate Blow Molding Solution Procures Enhanced Medical Bottle for Global Biotech Company

Mission critical dimensions and tolerances met by R&D Molders, Inc. in less then 7 days ..... Austin, TX, May 15, 2007- Today, R&D Molders, Inc. announces it procures a mission critical polycarbonate medical bottle solution in less than 7 days. We had been to numerous blow molding operations in the United States and Germany that were unable to adhere to our strict dimensions and tolerances for...

Read More »

Glass FIber Reinforcement is thermoplastic molding aid.

PerforMax® SP 798 chopped strand glass fiber reinforcement provides a heat resistant positive molding aid in computer and electronics applications. SP 798 helps to lower outgassing in combination with moldings using liquid crystal polymer and polyphenylene sulfide. Developed to withstand elevated temperatures associated with lead-free solder processes, product performs in temperatures exceeding...

Read More »
Customizable TPR Cords Offer RoHS Compliant Alternative to Neoprene

Customizable TPR Cords Offer RoHS Compliant Alternative to Neoprene

May 12, 2006 - Suited for electrical wire and cable, customizable Thermoplastic Rubber (TPR) cords offer rubber-like feel and appearance and maintain retractile memory and flexibility in high-stress applications. Cords are featured in 12, 24, 36, and 48 in. lengths, which can extend on 1:5 ratio if needed. They meet UL/CSA specifications for SEOW/STOW. Autac Introduces An Additional RoHS...

Read More »

All Topics