Injection Molding Still a Steadfast Manufacturing Process
Molding Services

Injection Molding Still a Steadfast Manufacturing Process

The custom injection molding process is now more than 150 years old. It remains one of the most dependable manufacturing processes still in use today. The plastics we know of today owe their origins to the late 19th century European and American chemists who experimented with many kinds of rubber and residue from various chemical mixtures. From the early 20th century scores of new plastic...

Read More »
Premiere: Reduced Opening Stroke for IML Applications Thanks to Patented Solution from Beck Automation at the NPE 2015
Metal Injection Molding Services

Premiere: Reduced Opening Stroke for IML Applications Thanks to Patented Solution from Beck Automation at the NPE 2015

Typical USA: High productivity thanks to 4-cavity mold IML technology in a nutshell Oberengstringen (CH)- – IML has arrived in North America. IML, introduced in Europe more than 25 years ago, is currently gaining in significance in North America. Reason enough for Beck Automation to take up this trend. Beck Automation will be presenting the highly dynamic IML system B4 on the stand of the...

Read More »
Premiere: Reduced Opening Stroke for IML Applications Thanks to Patented Solution from Beck Automation at the NPE 2015
Metal Injection Molding Services

Premiere: Reduced Opening Stroke for IML Applications Thanks to Patented Solution from Beck Automation at the NPE 2015

Typical USA: High productivity thanks to 4-cavity mold IML technology in a nutshell Oberengstringen (CH)- – IML has arrived in North America. IML, introduced in Europe more than 25 years ago, is currently gaining in significance in North America. Reason enough for Beck Automation to take up this trend. Beck Automation will be presenting the highly dynamic IML system B4 on the stand of the...

Read More »
Color Consistency for Injection Molded Parts Poses a Challenge
Plastic Injection Molding Services

Color Consistency for Injection Molded Parts Poses a Challenge

This becomes apparent when it comes to mating parts in any assembly where colors need to match 100 percent.-  Pre-colored plastic is used in the injection molding process so the molded part emerges in the specified color and finish.  There is no need for painting, plating or other finishing steps. The color becomes an integral part of the component, and the color is not just on the surface....

Read More »
MAXPRO® High-Pressure Custom and Standard Systems
Sponsored

MAXPRO® High-Pressure Custom and Standard Systems

At MAXPRO® Technologies, we welcome the opportunity to design a system to meet your specific system requirements. From boosting gas pressure for molding baby bottles to scavenging helium gas from decommissioned missile tubes to research laboratories, our team of high-pressure engineers and technicians bring a wide range of experience to the table when developing solutions for your high-pressure challenges.

Read More »
Color Consistency for Injection Molded Parts Poses a Challenge
Plastic Injection Molding Services

Color Consistency for Injection Molded Parts Poses a Challenge

This becomes apparent when it comes to mating parts in any assembly where colors need to match 100 percent.Â-  Pre-colored plastic is used in the injection molding process so the molded part emerges in the specified color and finish.  There is no need for painting, plating or other finishing steps. The color becomes an integral part of the component, and the color is not just on the...

Read More »
Improved Injection Molded Solutions for Embedded Electronics
Electric Cable Assemblies

Improved Injection Molded Solutions for Embedded Electronics

With the turn of the Century over molding embedded electronics has evolved from a niche into a market of its own within the expanding cable assembly industry. With printed circuit board assemblies becoming compact and cost effective when it comes to input/output (I/O) connections. Continued advancement in PCBA technology combined with an over molded package design, provide significant advantages...

Read More »
Improved Injection Molded Solutions for Embedded Electronics
Electric Cable Assemblies

Improved Injection Molded Solutions for Embedded Electronics

With the turn of the Century over molding embedded electronics has evolved from a niche into a market of its own within the expanding cable assembly industry. With printed circuit board assemblies becoming compact and cost effective when it comes to input/output (I/O) connections. Continued advancement in PCBA technology combined with an over molded package design, provide significant advantages...

Read More »
Teknor Apex and Arkema Team up to Make Housewrap Film Compounds with Renewable Content and Wide Choice of Film Permeabilities
Molding Services

Teknor Apex and Arkema Team up to Make Housewrap Film Compounds with Renewable Content and Wide Choice of Film Permeabilities

Teknor Apex Produces Multiple Compounds of Its Terraloy-® Bioplastic with Arkema’s Pebax® Elastomer, Making Possible a Range of Breathable Films for Housewrap PAWTUCKET, RI, U.S.A., – Teknor Apex Company and Arkema Inc. have entered into a strategic alliance that will broaden the range of breathable films by combining Arkema’s Pebax® thermoplastic elastomer (TPE) with Teknor...

Read More »
Teknor Apex and Arkema Team up to Make Housewrap Film Compounds with Renewable Content and Wide Choice of Film Permeabilities
Molding Services

Teknor Apex and Arkema Team up to Make Housewrap Film Compounds with Renewable Content and Wide Choice of Film Permeabilities

Teknor Apex Produces Multiple Compounds of Its TerraloyÂ-® Bioplastic with Arkema’s Pebax® Elastomer, Making Possible a Range of Breathable Films for Housewrap PAWTUCKET, RI, U.S.A., – Teknor Apex Company and Arkema Inc. have entered into a strategic alliance that will broaden the range of breathable films by combining Arkema’s Pebax® thermoplastic elastomer (TPE)...

Read More »
Long Fiber Reinforced Nylon Composites offer smooth surface.
Molding Services

Long Fiber Reinforced Nylon Composites offer smooth surface.

By producing smooth finish on external surfaces, Velocity-® Series of High-flow Nylon 6 and 66 LFT Composites facilitate injection molding of high glass or carbon fiber content materials. Resin-rich surface free of fibers makes colors appear vibrant, is capable of holding fine embossed details, and virtually eliminates need for any type of secondary finishing operations.

Read More »
Sponsored

Simple Connection – MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics