Molding Machinery

Haitian Upgrades MARS II S Series Molding Machines with Balanced Twin Injection Cylinder Design
Molding Machinery

Haitian Upgrades MARS II S Series Molding Machines with Balanced Twin Injection Cylinder Design

The MARS II S Series Injection Molding Machines are available in capacities ranging from 67 to 3,709 U.S. tons. The machines are now offered with fast clamp movement, reduced overall footprint and oil capacity requirement. The unit’s ball-type linear guide rails on the clamp minimize friction for a smooth clamp movement. They are equipped with copper graphite bushings that offer abrasion...

Read More »
New Rotary Blow Molding Machines Feature More Robust Modular Clamping Station
Molding Machinery

New Rotary Blow Molding Machines Feature More Robust Modular Clamping Station

Wilmington machinery has released a new series of rotary blow molding machines. These machines are part of the Serie III B machine line and feature a robust modular clamping station with pre-plumbed air and water services directly to the clamp platens. The new construction also includes a dual cam clamp actuation ronreduce wear on clamp components and allow for independent open/close control of...

Read More »
Yizumi-HPM Announces Sale of 3500 Ton Dual-Platen Injection Molding Machine and Automation to Otto Environmental Systems
Molding Machinery

Yizumi-HPM Announces Sale of 3500 Ton Dual-Platen Injection Molding Machine and Automation to Otto Environmental Systems

Large-Tonnage Press to Produce 65- and 95-Gal Waste Containers IBERIA, Ohio, August 28, 2018 – Yizumi-HPM Corp., a unit of the Yizumi Group and a leading manufacturer of high-quality hybrid injection molding machinery from 60 to 3500 tons, has announced the sale of a 3500-ton, dual-platen UN3500DP-N-75500 injection molding machine to Otto Environmental Systems, a leading manufacturer of...

Read More »
Yizumi-HPM's New Injection Molding Machines Come with Touchscreen Control Systems
Molding Machinery

Yizumi-HPM's New Injection Molding Machines Come with Touchscreen Control Systems

Yizumi-HPM’s Injection Molding Machines are available in DP-N two-platen servo hydraulic, A5-N toggle servo hydraulic and FE-N series full servo models. UN1200DP-N-12050 machines come with box shaped platen and produces 880-gram PP briefcase in a 49-sec cycle. A5-N series uses Double-Wave barrier screw technology and is available in 65 tons to 1125 tons with optimized injection structure...

Read More »
Wilmington Machinery Successfully Installs Complete Custom Pallet Molding Solution for European Customer
Molding Machinery

Wilmington Machinery Successfully Installs Complete Custom Pallet Molding Solution for European Customer

Learn more at NPE 2018 Orlando, Florida, Booth #W1823 The adoption of plastics pallet molding systems has increased over the years because plastic pallets are durable, clean and they are also highly reusable—thus reducing overall cost compared to wooden options. Plastic pallets also have made it easier for food and beverage companies to meet increased sanitary regulations because of the ability...

Read More »
TechnoDrive 65 IBM Machine Features Dry Cycle Time of 1.8 second
Molding Machinery

TechnoDrive 65 IBM Machine Features Dry Cycle Time of 1.8 second

TechnoDrive 65 Injection Blow Molding Machine utilizes a closed-loop cylinder system that works in combination with proportional valves. This unit features 50 HP output motor and remote access capabilities that allows connectivity with the machine via internet. Machine produces 41 grams per sec of HDPE and is designed to withstand numerous starts, stops, and reversals. This TechnoDrive 65 is...

Read More »
LUMINA MP800 comes with in-line compounding option.
Molding Machinery

LUMINA MP800 comes with in-line compounding option.

Lumina MP800 is enhanced with in-line compounding option. System features single 30:1 L/D and increased platen space to tonnage ratio. This molding system offers throughput of up to 2000 lb per hour and pressure capability of 10,000 psi. Unit consists of both hydraulic press and extruder drive and accepts both hot or cold runner molds.

Read More »
L42X All-Electric Reheat Machine provides neck finishes in 18 mm to 70 mm range.
Molding Machinery

L42X All-Electric Reheat Machine provides neck finishes in 18 mm to 70 mm range.

L42X All-Electric Reheat Stretch Blow Molder is equipped with four-parallel heating ovens, 12 Bosch-Rexroth servo motors and touchscreen operator panel. Unit can make 2 L container at a rate of 6500/hour and also helps to run two-cavity molds for production of up to 5 L containers. Unit features 40-ton servo-driven mold clamping system and the servo systems controls perform loading and...

Read More »
IntelliDrive Series IBM Machines provide reinforced main platen.
Molding Machinery

IntelliDrive Series IBM Machines provide reinforced main platen.

Jomar’s IBM Machines are offered in IntelliDrive 135 and the IntelliDrive 175 models. Model 175 machine offer a dry cycle time of 2.5 sec. The average power consumption of model 135 and 175 is 35.7 kW per hour and 48.1 kW per hour respectively and is dependent on the factors such as resin, bottle size and cycle time. These machines come with quick-change mounting system, displacement transducer...

Read More »
Wilmington Machinery to Feature New Medium-Pressure Injection Molding Technology and Blow Molding Machine Options at NPE 2018 Orlando, Florida, Booth #W1823.
Molding Machinery

Wilmington Machinery to Feature New Medium-Pressure Injection Molding Technology and Blow Molding Machine Options at NPE 2018 Orlando, Florida, Booth #W1823.

Wilmington Machinery of North Carolina will feature the LUMINA MP800 - an alternative to high-pressure injection molding - along with high-speed monolayer and multilayer rotary extrusion blow-molding machines and systems at booth #W1823. The LUMINA MP800 has a large platen space to tonnage ratio. The two-stage unit has a 152mm extruder with throughputs up to 2,000 pounds per hour, an accumulator...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers