New Controllers and Smart Power Stages Support 10A up to 1000A+ Digital Computing Loads
Digital multiphase controllers enable greater scalability and flexibility for adapting to any system requirement without requiring phase doublers. Smart power stages provide 20A to 90A of maximum continuous current and come with integrated driver and FETs. Ideal for data center servers, storage, optical transport, routers, switches, as well as computing and 5G wireless infrastructure equipment.
Read More »
New HPI10 Series Power Modules Meet UL 62368-1 Safety Standards
Support input requirements from 90-528VAC with various industry standard regulated outputs from 5VDC to 24VDC. Designed to operate from -40 to +80°C and are Ideal for lighting, building management systems and energy measurement to EV charging and consumer products. Optional cover shield helps prevent noise from the power supply interfering with sensitive communications receivers.
Read More »
New Digirail NXprog Offers USB, RS485 and Ethernet Communications Interfaces
Utilizes ATMEGA4809 processor with 48 kB of flash memory and 256 kB of EEPROM along with a battery backed real-time clock, watchdog timer and brown-out detector. Provides 2 Universal Analog Inputs for mV, V, mA, thermocouple, PT100/1000 RTD and NTC. Supports the Modbus RTU protocol via the RS-485 interface and Modbus TCP via the Ethernet interface.
Read More »
New COM Express Type 6 Compact Module Compatible with Windows 10 and Linux Operating Systems
CEM130 includes quad display capability through one VGA, one LVDS and two DDI port for HDMI 1.4, DVI and DisplayPort 1.2. Operates under wide voltage input from +8 V to +20 V and wide temperature ranging from -20°C to 60°C. Offers multiple I/O interfaces including two SATA-600 ports, three USB 3.0 ports, eight USB 2.0 ports, two serial TX/RX and more.
Read More »
The Ultimate Guide To UV Disinfection Lighting
This white paper provides a guide to UV disinfection lighting and their benefits over alternative disinfection methods.
Read More »
New 10GBASE-T MagJack ICMs are Backward Compatible with Existing Ethernet Networks
Designed for 5G cellular applications, 5G small cell radio devices, high-speed PCIe network interface cards, low density, non-PoE 10GBASE-T Ethernet switches, high-end servers, storage area networks, and cloud computing. Compatible with Marvell 10GBASE-T Ethernet PHYs, including the 88E2xxx and 88E3xxx series silicon. Ideal for customers looking to upgrade their product performance for maximum...
Read More »
New MICS Band Radio Modules Ideal for Body-worn and Implantable Diagnostic Devices
LBAA0PC1RMH298 module utilises the 402-405 MHz frequency band. Supports a 128 kbps data rate and can cover communication range of up to 2 m. Applications include insulin, drug, and baclofen pumps, as well as arrhythmia and bladder monitors.
Read More »
New Dual-channel Receiver Front-end Multichip Modules Feature On-chip Bias and Matching
Features single supply operation and low noise figure. Available with Low insertion loss of ADRF5545A at 3.6 GHz: 0.65 dB typ. Ideal for time division duplexing applications that operate from 2.4-4.2, 3.7-5.3 and 1.8-2.8 GHz.
Read More »
Vishay Intertechnology's microBRICK® Family Receives 'Most Innovative Products' of 2020 China AI Innovation Excellence Award
60 % Smaller Than Competing Solutions, POL DC/DC Converter Modules Deliver Efficiency Up to 95 % MALVERN, Pa. — Aug. 25, 2020 — Vishay Intertechnology, Inc. (NYSE: VSH) ) today announced that the Vishay Siliconix microBRICK® family of point of load (POL) DC/DC converter modules has been recognized by Elecfans with a Most Innovative Products of 2020 China Artificial Intelligence (AI)...
Read More »
New VPX337 Time and Frequency Card Comes with Back-Up Battery or SuperCap
Provides GPS/PTP (1588)/IRIG/NTP bus-level timing solution to VPX system, with exceptional flexibility. Precision UTC timestamps and GPS location/time/status are available via PCIe registers to the host CPU/application. Can demodulate IRIG Amplitude Modulated (AM) signals and receive/transmit IRIG DC Level Shift (DCLS) signals.
Read More »
New Input Module Detects and Processes Analog Signals
SP-SAC, SP-SAR4, and SP-SACR22 support sensors with 0/4-20 mA interface as well as temperature-dependent resistors like Pt/Ni sensors and deliver their analog data to the samos® PRO COMPACT safety controller. Analog values can be monitored with reliable limit, range, relation and difference function blocks in user programs created with the license-free programming software samos® PLAN 6. Ideal...
Read More »
ISO-Certified Precision Machining and Contract Manufacturing Services from DFF
DFF is an industry leading contract manufacturer specializing in medium to high production precision machined components and electromechanical assemblies. Our 100 CNC machining centers and design-assist capabilities ensure our customers' needs are always met. Check out our video to learn more.
Read More »
