
Avalues New Type 6 COM Express Compact Module are Complied with Function-Ready Baseboard
Avalue’s Type 6 COM Express® Compact Modules include ESM-APLC and ESM-KBLU models featuring Type 6 Rev 2.1 Pin-out. ESM-APLC is embedded with Pentium® N4200 1.1GHz / 6W and Celeron® N3350 1.1GHz / 6W SoC processors and supports dual channel 18/24 bit LVDS, Display Port, HDMI and VGA and one 204-pin DDR3L 1866 SO-DIMM. ESM-KBLU module comes with 3 SATA (6.0GB/s), 8 USB 2.0, 4 USB 3.0, 8-bit...
Read More »
Integra Introduces New 50-Ohm Matched Power Devices for Pulsed Radar Applications
Integra Power Devices include RF power Module (IGNP0912L1KW) and GaN/SiC transistors (IGT5259L50 and IGN1214L500B). IGNP0912L1KW module is operated over instantaneous bandwidth of 0.960-1.215 GHz and delivers 1000 W of minimum peak pulse power with 2.5 ms pulse width and 20% duty cycle. IGN1214L500B transistor is suitable for L-band radar applications and provides 500 W of power at 1.2-1.4 GHz,...
Read More »DSP Group®, Inc.'s New DHAN-J ULE Module is a Turn-Key Platform for ULE Nodes
The DHAN-J ULE module is based on DHX91 ULE SoC, operates both on battery and AC-power, and is specifically built as an ultra-reliable and congestion-free solution for robust IoT applications. Notable attributes are easy integration, wireless connectivity for external MCUs, simplistic interface, and lowest power consumption. Applications include smart cities, industrial environments, home...
Read More »
Hardy Now Offers Certified Weighing Components for Safe, Easy Weighing Solutions in Hazardous Areas
SAN DIEGO, CA – April 4, 2018 – Hardy Process Solutions (www.hardysolutions.com) now offers certified weighing components for use in classified Hazardous Areas. Hardy’s scales, load cells and junction boxes meet common national and local safety standards with appropriate levels of certified protection for different application environments such as Class I / Division 1 and Class II /...
Read More »
Confused About Which Screw Drive Style to Choose? Don't Lose Your Head!
This white paper outlines the different types of screw head and drive designs.
Read More »
BC118 AirPrime® Bluetooth Module Now Offers Maximum Data Rate up to 270 kbps
BC118 AirPrime® Bluetooth Low Energy Module comes with an embedded Bluetooth stack with UART interface. Unit features frequency band of 2.4 GHz, transmit power of +7.5 dBm and RF sensitivity of 0.1% BER at -92.5 dBm. The BC118 module is operated on 1.8 V to 3.6 V DC power voltages and is suitable for applications requiring data-only connections or cable replacement applications.
Read More »
AP560 CAN Bus Interface Module is Designed to ARINC 825 and CANaerospace Standards
AP560 CAN Bus Interface Module comes with four isolated CAN bus channels. Unit is suitable for avionics and military applications and is available with variety of carrier cards for hosting up to four AcroPack I/O modules on PCI Express, VPX or XMC computer platforms. Unit’s each channel features 1000V isolation and Holt H13111 CAN controller for high-performance and high-voltage isolation.
Read More »
Model 71800 Jade XMC Module Increases Digital Signal Processing Performance
Model 71800 Jade XMC Module is designed for process applications and offers up to 5520 DSP slices and 1.4 million logic cells. Unit features pre-loaded IP modules for DMA engines, DDR4 memory controller, test signal and metadata generators. Module is available with Kintex UltraScale KU035, KU060 and KU115 and comes with 5 GB DDR4 SDRAM, x8 PCIe Gen 3 link, 8 gigabit lanes and 38 LVDS general...
Read More »
Dinkle Supplies Custom Interface Module to Compressor OEM
Instead of designing and building an interface module in-house, a compressor OEM turned to Dinkle to save time and money. STAFFORD, TEXAS (March 22, 2018) – Dinkle International supplies a number of terminal blocks and related components to its customers, such as pluggable terminal blocks, and provides design and build services for custom interface modules. These printed circuit board (PCB)...
Read More »
Wago's 750 Series XTR I/O Modules are protected against EMC interference.
Wago’s 750 Series XTR I/O Modules consist of 8 channel modules, SSI Interface and Incremental Encoder, CAN Gateway communication module, Fused power supply modules and digital and analog modules. These modules are operated in -40°C to 70°C temperature range and are suitable for transportation, energy and process technology applications.
Read More »
Acacia Communications Demonstrates AC1200 Coherent Module for DCI, Metro and Long-Haul Applications
MAYNARD, Mass., March 13, 2018 - Acacia Communications (NASDAQ:ACIA), a leading provider of high-speed coherent optical interconnect products, today announced it is demonstrating its AC1200 Coherent Module at the Optical Fiber Communication Conference and Exhibition (OFC) taking place March 11 - March 15, 2018 at the San Diego Convention Center. Acacia’s AC1200 module has been designed to offer...
Read More »
SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection
Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.
Read More »