New Modules Products

I/O Terminal Block connects to DeviceNet bus system.

Brick-style RIO remote terminal block includes base module and plug-in, DeviceNet, electronic module. Terminal strips on base module accommodate 2- and 3-wire field devices, such as sensors and actuators. Additional I/O may be added with analog and digital expansion module terminal blocks. Base module can be snapped onto DIN rail or panel mounted. Module is available with either screw-clamp or...

Modules

I/O Interface conforms to SEMI-S2 safety requirements.

Model CDN127 digital peripheral device interface supports 8 fail-safe digital inputs/outputs, 2 analog inputs, 2 analog outputs, and electromechanical relay interlocks. Module converts non-DeviceNet(TM) peripheral devices to DeviceNet. CDN127 operates as Group 2 slave on DeviceNet network. Device Profile for CDN127 is based on DeviceNet Vacuum Dry Pump Device Profile, Revision 1.7.

Modules

Clock Data Modules suit SONET OC-192 applications.

M830/831 series CDR modules regenerate spectral component from incoming NRZ data stream, and output low jitter clock and retimed complementary data. Typical data output jitter at 12.25Gb/s is less than 8ps p-p, making them suitable for SDH system applications. Modules use phase-lock loop architecture and high stability, low-nose SAW VCO to provide low jitter clock and data outputs. Series is...

Modules

I/O Modules provide industrial control.

POINT I/O(TM) Modules offer options for digital, analog, thermocouple and RTD control applications. Networking interfaces can be snapped together to meet exact needs. Modules have gold-plated backplane, wire-off indication and point-level diagnostics. Analog modules provide interface to analog voltage field devices located more than 20 ft from system controller. Thermocouple and RTD modules each...

Cobots Vs Covid: Today's Manufacturing Reality and Tomorrow's New Normal

This white paper provides an in-depth look into how robots can play a role in helping companies succeed in the COVID-19 world.

Modules

Spanner Module offers visible rotary address switches.

FDN-DN1 Spanner module provides means to route data between 2 PLCs using DeviceNet(TM). By connecting DeviceNet networks directly, it eliminates needs for high-level control network pyramids. FDN-DN1 appears to each PLC as standard rack of I/O. Any DeviceNet scanner can send I/O data to Spanner module without additional software or complex configuration procedures. It is capable of transferring...

Modules

Interface Module works with laser gauge.

Computer software and interface module connect company's Laser Microgage system to PC or laptop. This allows readings to be acquired, plotted, and analyzed in field for fast machinery alignment and response. Interface provides measuring resolution to 0.00001 in. or 0.25 micron. Module is packaged in compact aluminum housing with serial RS232C output connector that couples directly to any serial...

Modules

Bluetooth Module provides compact wireless communications.

Compact LTCC RF module measures 7 x 7 x 1.8 mm, uses one-third less power than company's other modules, and provides Bluetooth 1.1-compliant Class 2 (max 4dB) output. It complies with Silicon Wave RF and Blue-RF interfaces, and GSM and CDMA de facto standards. Low temperature co-fired ceramic substrate includes filter, inductors and capacitor. Applications include wireless communications devices...

Modules

Data Modules measure temperature, voltage and current.

OMEGABUS D5000 Modules convert 4 analog input signals to engineering units and transmit in ASCII format to any host with standard RS-485 or RS-232C ports. They provide direct connection to sensors and perform all signal conditioning, scaling, linearization, and conversion to engineering units. Address, baud rate, parity, and echo are selectable using commands over communications port. Selections...

Modules

Modular Remote I/O's are rated Class I, Div 2.

systronÃ‚® PM remote I/O modules include bus modules, digital and analog I/O modules, RS-232/RS-485 serial interfaces, central processing units (CPUs), and special purpose I/O modules. Rail mounted units measure only 22.5 or 45 mm wide. systron modules can be used to create micro PLCs. All remote I/Os are CE marked, UL listed, and CSA certified. Built-in ribbon cable simplifies interfacing...

Modules

I/O Module performs accurate high-voltage measurements.

Analog FieldPoint FP-AI-102, with software, allows users to directly measure high-voltage process signals without designing custom signal conditioning systems. 12-bit resolution, +/-120 V input range distributed I/O module works with all FieldPoint network modules and is designed for use in industrial environments, automotive testing for fuel cells, and high-voltage battery packs.

Optimize Your Workforce with Weavix™ by PK Industrial

The Weavix™ platform takes productivity, quality, and visibility to a new level by providing better communication and real-time KPIs. Check out the video to learn more!