New Modules Products

Programmable Controller suits small applications.

ILC 170 ETH 2TX features 2 Ethernet ports with built-in Ethernet switch, which simplifies daisy-chaining of multiple units. It has data and program memory of 512 KB and retentive memory of 48 KB, along with 8 digital inputs and 4 digital outputs (500 mA) integrated on-board. Unit supports up to 3 local remote bus branch modules, Modbus TCP for data exchange to any Modbus TCP-capable device, and...

Parallel Grip and Rotate Modules offer 350 N of grip force.

With up to 4 mm stroke/jaw, and 0.5 Nm of torque for rotation, DGP404 Series of parallel grip and rotate modules are designed for high-load automation applications that require parts to be sorted and rotated 90 or 180Ã-

HD Module suits multimedia intensive embedded applications.

Supporting connectors based on SUMIT(TM) specification, VIA P710-HD module enables Hi-Def(TM) video playback and advanced graphics on VIA EPIA-P710 Pico-ITXe board. It is based on S3 Graphics 4300E embedded graphics processor with total graphics subsystem TDP of less than 8 W. Including 256 MB of dedicated GDDR 2 on-board memory, module supports separately configurable dual DVI, HDMI, and S-Video...

USB Module provides 96 or 48 lines of digital I/O.

Designed for control and monitoring applications, Model USB-DIO-96 lets users add portable digital I/O to any PC or embedded system with USB port. Hot-pluggable device is fully compatible with USB 1.1 and 2.0 ports, and uses 2 or 4 50-pin IDC-type shrouded headers with 24 lines per connector. All I/O lines are buffered with 32 mA source, 64 mA sink current capabilities. Utility 5 Vdc is available...

Construction Materials for the Future

In this eBook, we highlight some key advantages of Cross-Laminated Timber (CLT) and show why every builder needs to consider adopting this remarkable construction advancement. We'll also introduce you to the latest innovation in CLT, GRIPBlock™, an exciting new technology that will change the way you look at CLT forever.

JTAG Interface Device supports MIPS based processors.

On-Chip Debug Technology (OCDemon) support for MIPS32 24KE RISC core family with DSP lets engineers control and debug their hardware designs and application software without using other system resources. Along with support from several debuggers and full support for Eclipse Ganymede, solution provides GNU toolset with gcc, gas, and gdb. JTAG interface devices are also available for other MIPS...

I/O Module expands Pico-ITXe single board computers.

Pico-I/O(TM) Model PICO-DIO16RO8 features 16 TTL/LVTTL digital I/Os and 8 form C electromechanical relay outputs. All 16 I/O lines are buffered with 32 mA sink/source current capabilities. Mix of programmable inputs and outputs, along with dedicated relays, provides flexibility for system designers. Small form factor product, which occupies half of PC/104 board, has bus and power connections...

Wireless Module helps embed M2M connectivity.

Featuring internal TCP/IP stack for data transfer, Firmware Over the Air support, and SSL for secure connectivity, C24 CDMA 1X module helps manufacturers to embed connectivity to Sprint network in their devices. It features on-board multimode GPS, including autonomous GPS, A-GPS, and MS-based GPS, suited for location-based wireless applications. Module enables fleet management, telematics,...

I/O Modules expand measurement communication capabilities.

By plugging embedded C Series Modules into NI Single-Board RIO embedded control and data acquisition devices, users can add high-voltage power monitoring, high-resolution analog input, strain, and communications capabilities. RIO Devices combine embedded real-time processor, reconfigurable FPGA, and analog and digital I/O on single PCB. Modules include 3-channel, 300 V analog input, 16-channel...

Digital I/O Module combines boundary scan/at-speed test.

Model SFX-5364 SCANFLEXÃ-® I/O module features 64 programmable I/O channels and is configurable for structural Boundary Scan operations and protocol-based at-speed tests up to 100 MHz through integrated VarioCoreÃ-® technique. Each channel is configurable as In/Out/Bidir/Tri-state and groups of 32 I/O each can be adjusted from 1.8-4.5 V in 0.1 V steps. It supports interconnection or...

Ethernet Modules are IP67-rated for harsh environments.

EtherCATÃ-® Box I/O modules feature direct interface to EtherCAT, maximizing performance down to each I/O module. At 126 x 30 x 26.5 mm, units integrate stepper drive functions and resist moisture and dust in harsh environments. Connection is established via screened M8 screw connectors, with sensors and actuators also connected via screw-type M8 or M12 connectors. Communication via standard...

What Can Test Devices Spin for You?

Test Devices helps you ensure the safety and efficiency of your high performance machines with cutting edge spin testing, rotor engineering, and precision balancing capabilities. Check out the video to learn more.