Cook/Cool Tank offers coil jacket.

Cook/Cool Tank offers coil jacket.

By using Uniflow Coil Jacket, low-profile unit performs cooling tasks in half of time usually required when used with Dimple Jacket. Design provides for extended service life while providing same geometry with double-motion, counter-rotating agitator. Unit performs mixing and heat transfer in single vessel.

Read More »
Mixer Drives handle water and wastewater applications.

Mixer Drives handle water and wastewater applications.

Series 3800M Mixer Drives feature rugged construction to withstand all static loads as well as dynamic loading. Gears and bearings provide long life. All openings are protected with water and dust proof covers. Drives can be supplied with any type of impeller to meet application requirements.

Read More »
Proportioner has digital control feature.

Proportioner has digital control feature.

Reactor(TM) E-Series proportioner for spraying plural components such as polyurethane foam and polyurea is for insulation and waterproofing applications. Digital controls provide diagnostics and ratio assurance to simplify operation. Features include digital pressure control, reduced pulsation, improved pump loading, and balanced feed pressures. Temperature-sensing capabilities provide accurate...

Read More »
Mixer Impeller suits shear-thinning fluid applications.

Mixer Impeller suits shear-thinning fluid applications.

CF Counter Flow Mixer Impeller promotes strong up and down pumping action, while helping to control Weissenberg (shaft climbing) effect of fluid being blended. Mixed axial and radial flow allow it to operate at high impeller to tank ratios. Impeller is suitable for high viscosity polymer blending applications.

Read More »
Research/Development Mixer comes with speed control.

Research/Development Mixer comes with speed control.

Mixer, with integrated speed control, employs variable frequency drive that mounts directly onto motor. Mixer is operated by hand-held unit, which controls all processing functions. Modular, belt drive system connects AC motor and mixing chambers, allowing each mixer to operate at identical tip speeds. Unit has double mechanical seal, four interchangeable mixing tools, up to three stages, and...

Read More »
Static Injection Mixer features short laying length.

Static Injection Mixer features short laying length.

Static Injection Mixer is a fixed plate that installs in-line, and into which one or more fluids are injected and rapidly mixed by combination of alternate vortex shedding and intense shear zone turbulence. It achieves over 98% injected fluid dispersion only 10 diameters downstream from mixer. Unit fits inside mating flange bolt circle of any piping system and comes in PVC, FRP, 316 SST,...

Read More »
Plastic Compounding Mixer removes moisture while mixing.

Plastic Compounding Mixer removes moisture while mixing.

Model VMX removes moisture, entrapped air, and volatiles present in compounds. Combining heat and vacuum system, unit is suitable for use with hygroscopic and non-hygroscopic resins. It features hardened mixing rotors and abrasion hardened stainless steel mixing chamber with leak-proof construction. Mixing chamber tilts for quick discharge and cleanout. VMX Mixer comes in 5 L lab models, and in...

Read More »

Hosedown Station provides vortex scouring action.

STVM Silent Type Vortex Mixing Hosedown Station provides instantaneous, temperature-controlled hot water by blending steam and cold water. Thermal element automatically shuts off steam flow if hot water temperature exceeds temperature set point by 15-

Read More »
Inline Mixer uses disposable mix elements.

Inline Mixer uses disposable mix elements.

Able to perform low-pressure processing without use of solvent flushing, ParaDyne is equipped with non-drip feature that minimizes mixed material dripping during indexing sequence. Pull- or snuff-back action decompresses mixer chamber and holds material inside mixer until mix head can be indexed to next part. Product incorporates 2-component mix head that utilizes servo, hydraulic, or air-driven...

Read More »
Stainless Steel Mixers produce uniform emulsion.

Stainless Steel Mixers produce uniform emulsion.

Aqueous Mixers blend chemicals with water automatically for uniform emulsion at any proportion. All-metal units have no moving parts and require plant water line pressure of 25 lb. Fingertip control allows fine adjustment of mixing ratios from 3:1 to 100:1. Models are offered in stainless steel, brass, or nickel-plated and are rated at 3 or 10 gpm. They accommodate 5 gal pails, and 15, 30 or 55...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics