Mixing System is suitable alternative to vacuum feeding.
Dispersing Equipment

Mixing System is suitable alternative to vacuum feeding.

Able to achieve homogeneous pre-dispersion results with precise, reproducible qualities, Y-Mix(TM) disperser incorporates controlled process environment where finely dispersed powders come in contact with liquid surface and are wetted under shear. Product offers dust and emission-free dispersion within completely enclosed process chamber and is not sensitive to large particles or foreign objects...

Read More »
Proportioner has digital control feature.
Impeller / Propeller / Turbine - Agitators / Mixers

Proportioner has digital control feature.

Reactor(TM) E-Series proportioner for spraying plural components such as polyurethane foam and polyurea is for insulation and waterproofing applications. Digital controls provide diagnostics and ratio assurance to simplify operation. Features include digital pressure control, reduced pulsation, improved pump loading, and balanced feed pressures. Temperature-sensing capabilities provide accurate...

Read More »
Mixer Impeller suits shear-thinning fluid applications.
Impellers

Mixer Impeller suits shear-thinning fluid applications.

CF Counter Flow Mixer Impeller promotes strong up and down pumping action, while helping to control Weissenberg (shaft climbing) effect of fluid being blended. Mixed axial and radial flow allow it to operate at high impeller to tank ratios. Impeller is suitable for high viscosity polymer blending applications.

Read More »
Research/Development Mixer comes with speed control.
Impeller / Propeller / Turbine - Agitators / Mixers

Research/Development Mixer comes with speed control.

Mixer, with integrated speed control, employs variable frequency drive that mounts directly onto motor. Mixer is operated by hand-held unit, which controls all processing functions. Modular, belt drive system connects AC motor and mixing chambers, allowing each mixer to operate at identical tip speeds. Unit has double mechanical seal, four interchangeable mixing tools, up to three stages, and...

Read More »
Static Injection Mixer features short laying length.
Mixers (Fluid Blending)

Static Injection Mixer features short laying length.

Static Injection Mixer is a fixed plate that installs in-line, and into which one or more fluids are injected and rapidly mixed by combination of alternate vortex shedding and intense shear zone turbulence. It achieves over 98% injected fluid dispersion only 10 diameters downstream from mixer. Unit fits inside mating flange bolt circle of any piping system and comes in PVC, FRP, 316 SST,...

Read More »
Plastic Compounding Mixer removes moisture while mixing.
Plastic Equipment

Plastic Compounding Mixer removes moisture while mixing.

Model VMX removes moisture, entrapped air, and volatiles present in compounds. Combining heat and vacuum system, unit is suitable for use with hygroscopic and non-hygroscopic resins. It features hardened mixing rotors and abrasion hardened stainless steel mixing chamber with leak-proof construction. Mixing chamber tilts for quick discharge and cleanout. VMX Mixer comes in 5 L lab models, and in...

Read More »
Miscellaneous Cleaning Equipment

Hosedown Station provides vortex scouring action.

STVM Silent Type Vortex Mixing Hosedown Station provides instantaneous, temperature-controlled hot water by blending steam and cold water. Thermal element automatically shuts off steam flow if hot water temperature exceeds temperature set point by 15°F. Vortex scouring action helps prevent scaling. Water pressures range from 20-110 psig and steam pressures range from 40-150 psig. Model V150...

Read More »
Inline Mixer uses disposable mix elements.
Impeller / Propeller / Turbine - Agitators / Mixers

Inline Mixer uses disposable mix elements.

Able to perform low-pressure processing without use of solvent flushing, ParaDyne is equipped with non-drip feature that minimizes mixed material dripping during indexing sequence. Pull- or snuff-back action decompresses mixer chamber and holds material inside mixer until mix head can be indexed to next part. Product incorporates 2-component mix head that utilizes servo, hydraulic, or air-driven...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics