Continuous Rotary Mixer features 316 SS sanitary design.
Impeller / Propeller / Turbine - Agitators / Mixers

Continuous Rotary Mixer features 316 SS sanitary design.

UTICA, NY - A new Model 16-4SS" Sanitary Rotary Continuous Mixer from Munson Machinery blends ingredients in ratios as extreme as one part per million with 100% uniformity regardless of disparities in the bulk densities, particle sizes or flow characteristics of ingredients, which may include liquid additions. Capacity ranges from 85 cu ft/h (2.45 cu m/h) at 1-minute residence time, to 42 cu ft/h...

Read More »
Mixer is designed for vacuum/pressure operation.
Mixers

Mixer is designed for vacuum/pressure operation.

Offered in sizes ranging from 1-4,000 gal, triple shaft Model VMC-40S Sanitary VersaMix is constructed using all type 316 stainless steel wetted parts, polished to 180 grit finish. It includes high shear rotor stator mixer with SLIM for solids induction, high-speed disperser, and 3 wing anchor with Teflon-® scrapers. Vessels are jacketed to heat/cool and can operate to 29-½ hg vacuum and 15...

Read More »
High Shear Mixer targets process industries.
Impeller / Propeller / Turbine - Agitators / Mixers

High Shear Mixer targets process industries.

Incorporating rotor/stator configuration to promote dual flow through Delta rotor/stator, PM Model offers 15-30 minutes typical cycle times. Designed as batch mixer, it is mounted on conventional air/oil hydraulic lift system, and offers rapid incorporation of powders. Several models are available from 5-200 hp. Intended for use in agglomerate reduction and production of fine emulsions, unit...

Read More »
Hosedown Stations safely blend steam and cold water.
Miscellaneous Stations

Hosedown Stations safely blend steam and cold water.

BLYTHEWOOD, SC-Spirax Sarco, Inc., (SSI) announces the release of the new STVM-iLoc line of steam/water hosedown stations. The stations provide hot water for washdown by quickly and safely blending steam and cold water to the required set temperature-ideal for washing down walls, floors, process equipment and vehicles in industries such as food & beverage, chemical, pharmaceutical and...

Read More »
Impeller / Propeller / Turbine - Agitators / Mixers

Planetary Mixer handles high-viscoity paste materials.

Featuring 316 stainless steel construction and polished to 150 grit finish, Single Planetary Mixer is available in wide range of sizes from 1-300 gallon capacity. Unit is equipped with custom helical mixing blade as well as air/oil hydraulic lift to raise and lower agitator from mix vessel. Providing dust tight operation with numerous charge and sight ports, mixer includes NEMA 4 control panel...

Read More »
Single Planetary Mixer handles high-viscosity materials.
Impeller / Propeller / Turbine - Agitators / Mixers

Single Planetary Mixer handles high-viscosity materials.

Featuring stainless steel type 316 construction polished to 150 grit finish, single planetary mixer is equipped with custom helical mixing blade that allows mixing of high-viscosity paste materials. Unit incorporates multiple charge and sight ports and is built for dust-tight operation. In addition to NEMA 4 control panel purged for Cl1 Div 1 hazardous areas, features include air/oil hydraulic...

Read More »
Top-Entering Agitators offer modular design package.
Impeller / Propeller / Turbine - Agitators / Mixers

Top-Entering Agitators offer modular design package.

Model 20 HT/GT agitators include high-efficiency cast gearbox with heavy-duty output shaft and bearings as well as standard cast dry well seal that eliminates lubrication oil leakage from gearbox. Devices are designed to meet AGMA, OSHA, ANSI, IEC, DIN, EU, and ATEX standards and requirements. Also featuring reversible rotation, they are available in right angle and parallel shaft configurations,...

Read More »
Double Discharge Doors For Twin Shaft Mixers
Mixers

Double Discharge Doors For Twin Shaft Mixers

The Sicoma Company, of Italy, has announced the introduction of DOUBLE DISCHARGE DOORS on its line of twin shaft mixers. This is the first time that such a feature has been available on this type of mixer; it is an important development that improves plant efficiency as well as cost, both for precast and ready-mix operations. Horizontal pan mixers are well known for their ability to discharge...

Read More »
Impeller / Propeller / Turbine - Agitators / Mixers

Miniature Rotary Batch Mixer has 5 ft³/500 lb capacity.

Model MX-5-SS blends ingredients in ratios as extreme as 1 ppm with 100% uniformity in less than 3 min, regardless of disparities in bulk densities, particle sizes, or flow characteristics of batch components. Rotating drum with proprietary mixing flights gently tumbles, turns, and folds material. For complete evacuation with no residual material, rotating vessel and internal flights lift and...

Read More »
Coolant/Lubricant Mixing Station can be manual or automatic.
Mixers

Coolant/Lubricant Mixing Station can be manual or automatic.

Manual Mixing Station (MM-S) and Central Supply Mixing Station (CSM-S) are designed for blending and dispensing of cutting and forming fluids in manufacturing. Automated mixing and supply of fluids and lubricants to one or more machining or metalforming stations results in consistent concentration ratios. While CSM-S produces concentration ranges from 0.5-37% and delivers up to 3 gpm, MM-S has...

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics