Impeller / Propeller / Turbine - Agitators / Mixers

Microfluidics to Showcase M-110p Microfluidizer® Processor at Interphex 2008

For More Information, Visit Booth #1618 Newton, Mass. - Microfluidics will showcase its portable M-110P Microfluidizer-® processor, a bench top lab machine that requires no compressed air or cooling water for hydraulics, at the Interphex 2008 Conference and Exhibition from March 26-28 in Philadelphia, PA. Designed to operate reliably, quietly and efficiently at up to 30,000 psi process pressure,...

Read More »
Chemineer QED Plus Mixers Offer Reliable Performance and Unbeatable Value
Impeller / Propeller / Turbine - Agitators / Mixers

Chemineer QED Plus Mixers Offer Reliable Performance and Unbeatable Value

Dayton, Ohio - Chemineer QED Plus(TM) mixers are the reliable performers for a broad range of fluid mixing applications in the specialty chemical, petrochemical, pharmaceutical and general fluid processing industries. QED Plus(TM) mixers can handle blending, solids suspension and high viscosity applications, include an exclusive leak-proof drywell design and a minimum 30,000 hr. L10 bearing life...

Read More »
Metso Best Designs Live Bottom Bin Discharger
Impeller / Propeller / Turbine - Agitators / Mixers

Metso Best Designs Live Bottom Bin Discharger

BRUNSWICK, OH-In response to a leading manufacturer's need to hopper and control feed a needle type of material used as a reinforcement in their ad mix, Metso BEST, Inc. designed a Live Bottom Bin Discharger with 10 cubic foot Storage Hopper to meter the needles to the mixing process. The manufacturer of refractory/ceramic-type products could not feed the 1 long needle-like material by a screw...

Read More »
Impeller / Propeller / Turbine - Agitators / Mixers

Lab Processor offers range of production capabilities.

Powered by 20 A electrical current, M-110P Microfluidizer-® laboratory scale processor requires no compressed air or cooling water. Operating pressures from 2,000-30,000 psi enable production of nano-suspensions and nano-emulsions as well as liposomal encapsulation and cell disruption. Portable, bench-top unit supports flow rates from 110-155 ml/min at any process pressure, allowing production...

Read More »
Carpet Extractors

Carpet Cleaner offers one-pass cleaning.

Cleaning most carpeted areas in just one pass, Agitator 18 first agitates carpet to loosen dirt/soils, and then rinses with dual spray jets and extracts with 3-stage vacuum system. Unit comes with 18 in. cleaning path, automatic chemical-metering system, and EZ-Pull belt which straps around user's waist to help pull and maneuver machine without stress or strain.

Read More »
Impeller / Propeller / Turbine - Agitators / Mixers

Emulsifier provides adjunct/antigen mixing in vaccines.

Designed to operate unattended, Model KDS 330 emulsifies Eleutherosides and other components in adjunct composition. Unit can create viscous fluids/suspensions by forcing fluids back and forth through micro-emulsifying needle. With menu-driven program, user enters syringe diameter and flow rate, and selects dispense volume. When in emulsion mode, pump cycles from infusion to withdrawal...

Read More »
Electronic Mixers

Measuring Mixer and Extruder System meets QC needs.

Available in table and floor models, HAAKE PolyLab QC enables QC staff to characterize sample's properties by gas flow, electric conductivity, or capillary viscosity measurements. Modular torque rheometer can be connected to interchangeable mixer, single-screw extruder, or conical twin-screw extruder. Offering backwards compatibility, existing measuring mixers and extruders can also be connected....

Read More »
Mixing Machine comes with touch screen control system.
Impeller / Propeller / Turbine - Agitators / Mixers

Mixing Machine comes with touch screen control system.

PowerMix combines planetary mixing blade revolving in combination with separate, high-speed dispersion blade. Both revolve on their own axis as well as on common axis, and each can have independently selectable, variable-speed operation. This allows mixer to be fine-tuned to meet specific process needs. Available in various sizes from -½-750 gal, machine is used for high-viscosity vacuum mixing...

Read More »
Glass-Lined Agitator Blades are suited for low-level mixing.
Miscellaneous Blades

Glass-Lined Agitator Blades are suited for low-level mixing.

Combining features of hydrofoil and trapezoidal agitator blades, OptiFoil-® maximizes pumping action required for homogenization, suspension, heat transfer, and crystallization of fragile particles. Shape of blade produces effective mixing of minimum product volumes, creates strong flow at reactor bottom, and facilitates evacuation of vessel by reducing gap between blades and bottom of reactor....

Read More »
Impeller / Propeller / Turbine - Agitators / Mixers

Agitator features swing-out seal change design.

Dayton, Ohio - The Chemineer® Model 20 HT/GT top-entering agitators feature a swing out seal change design for easy seal maintenance and reduced maintenance cost. With the Model 20 HT/GT agitators, there is no need to lift or remove the gearbox, saving labor and downtime. For replacement of the mechanical seal, simply rotate the gearbox 90° around the pivot pin. The top of the seal pedestal...

Read More »
3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership
Sponsored

3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership

At 3Sixty Mission Critical, we specialize in maintaining the performance and uptime of our customer's mission-critical applications. Our services are comprehensive and designed to take on the entire burden of maintenance. Our "UPS as a service" is just another example of how we develop out of the box solutions to help our customers operate more efficiently; see our video to earn more.

Read More »

All Topics