When Two Bulk Conveyors Are Better Than One
Screw Conveyors

When Two Bulk Conveyors Are Better Than One

Isotopic chemical characteristics require integration of mechanical and pneumatic conveyors for batching accuracy QUAPAW, OK - To manufacture high-purity chemical and isotopic products, EaglePicher Technologies engineered a new process in which five bulk products are transferred, weighed with a high degree of accuracy, and conveyed to a mixing system. The EaglePicher engineers knew the batch...

Read More »
Impeller / Propeller / Turbine - Agitators / Mixers

NETZSCH Now Offers Standardized Mixing and Dispersing Equipment Line

EXTON, Pa. - August 7, 2008 - NETZSCH Fine Particle Technology now offers its line of mixing and dispersing equipment in-stock for industrial manufacturers that do not need custom-designed systems. In stock at NETZSCH's Exton, Pa., facility, the NETZSCH Machinery Dispersers (NMD) provide variable speed control for low- to medium-viscosity products. The line is immediately available for delivery,...

Read More »
Impeller / Propeller / Turbine - Agitators / Mixers

Mixer Drive is suited for water and wastewater industry.

Designed for mixing heavy-duty concentrations of water and wastewater, RAVEN(TM) 3800 Series can be used in caustic and corrosive environments. It features cast-iron housing with open tank mounting configurations, input and intermediate shaft designs for reduced deflections, C-Face motors with piloted motor adapters, dry wells, and end covers. With drive-sleeve design, unit comes in double and...

Read More »
Impeller / Propeller / Turbine - Agitators / Mixers

Mixing and Aeration System suits water/wastewater treatment.

RAPTOR Directional Mixing & Aeration System simultaneously aerates and mixes wastewater to improve oxygenation by creating circular flow pattern within industrial and municipal lagoons or basins. Propeller design pushes fluid over diffuser while ensuring uniformity of fluid acceleration. Available in floating and fixed configurations, it operates in both nitrification and de-nitrification modes....

Read More »
Mixers are designed for mounting to IBCs or totes.
Impeller / Propeller / Turbine - Agitators / Mixers

Mixers are designed for mounting to IBCs or totes.

Available with TEFC electric motors (1/3 to 1 hp) or air motors (Â-½ to 1 hp) as well as explosion-proof motors, Series HGL (430 rpm) mixers allow integration with IBCs or poly tote bins by use of optional 2 in. 316SS bulkhead fitting. They feature short shaft and folding propeller that are constructed of 316SS and capable of fitting through 2 in. opening. Prop's operating diameter is 9 in....

Read More »
Wet-Mix Process Systems Feature Colloid Mill And Feed Pump
Impeller / Propeller / Turbine - Agitators / Mixers

Wet-Mix Process Systems Feature Colloid Mill And Feed Pump

Custom engineered wet-mix process systems that feature colloid mills and positive displacement feed pumps, packaged to achieve specific customer requirements for emulsifying, dispersion, and particle size reduction, are available from Bematek Systems, Inc. of Salem, Massachusetts. Bematek Wet-Mix Process Systems provide users with a finished product that is homogeneous, has repeatable viscosity...

Read More »
Mortar Mixers work with stiff and abrasive media.
Mixers

Mortar Mixers work with stiff and abrasive media.

Mounted on heavy-duty tires and powered by Honda gas engines or electrical motors, Buddy by Stone mixers are comprised of 3 belt-driven models and one fully-enclosed gearcase model. Drum profile eliminates dead zones, and 8-paddle configuration delivers dynamic mixing. Offered as true 2-, 3-, and 4-bag mixers, models EXD850, EXD1100, and EXD1300 feature respective capacities of 8, 11, and 13...

Read More »
Powders into Liquids: Dustfree Induction and Dispersion
Impeller / Propeller / Turbine - Agitators / Mixers

Powders into Liquids: Dustfree Induction and Dispersion

Mixing of powder into liquid is very easy: You simply pour it onto the surface of the liquid and then you mix it in. It is quite clear that this creates a lot of dust - powder falls beneath the vessel but knifes and other equipment may fall into the vessel instead. It is obvious that powder sticks to the walls of the vessel and other devices inside and it is supposed to be normal, that lumps and...

Read More »
Colloid Mills Tailored To Wet-Mixing And Milling
Milling Machines

Colloid Mills Tailored To Wet-Mixing And Milling

A line of colloid mills that can be tailored to match specific customer processing requirements ranging from low- to high-viscosity to abrasive slurries is available from Bematek Systems, Inc. of Salem, Massachusetts. Bematek Colloid Mills have a milling head which features a standard rotor and stator with working surfaces that can be tailored by the manufacturer to meet specific customer...

Read More »
In-Line Mixing Head Eliminates Need For Multiple Mixers
Impeller / Propeller / Turbine - Agitators / Mixers

In-Line Mixing Head Eliminates Need For Multiple Mixers

A patented, modular multi-shear mixing head for their in-line mixers that eliminates the need for multiple passes, recirculation, or several mixing machines is available from Bematek Systems, Inc. of Salem, Massachusetts. The Bematek Z-Series In-Line Mixer features a modular, multi-shear mixing head consisting of stators and high speed rotors that can be arranged in any combination to create from...

Read More »

All Topics