Ross Multi-Shaft Mixers
Mixers

Ross Multi-Shaft Mixers

Hauppauge, NY – Ross offers customizable Multi-Shaft Mixers for processing solid-liquid dispersions, solutions and emulsions over a wide range of viscosities. These devices can be designed to impart high levels of shear for powder wet-out and particle size reduction using a high speed sawtooth disperser blade and/or a rotor/stator assembly. For viscous, low shear/high flow applications, a...

Read More »
Contained Vessel Chargers handle highly potent slurries, powders.
Mixers

Contained Vessel Chargers handle highly potent slurries, powders.

Designed to minimize contamination risk, SlurryBox enables charging of highly potent slurry into reactors through pressured vessels. It can be used asÂ- central dispensing and weighing station servicing multiple reactors. Engineered to charge reactor from different size drums containing potent powder, Multi-Drum Monocell achieves OEL of less than 1 µg/m³ 8 hr TWA....

Read More »
Planetary Disperser features 10 gallon capacity.
Impeller / Propeller / Turbine - Agitators / Mixers

Planetary Disperser features 10 gallon capacity.

Combining dual-bladed disperser with helical planetary stirrer, PowerMix Model PDM-10 disperses powders, fibers, or other solids into liquid. As material thickens, combined mixing power of agitators can continue to apply high levels of shear even after product has reached viscous, non-flowing state. Vacuum-rated mixer features portable mix vessel, air/oil hydraulic lift to raise/lower agitators,...

Read More »
Static Mixer targets mobile gas well fracking rigs.
Mixers (Fluid Blending)

Static Mixer targets mobile gas well fracking rigs.

Consisting of length of pipe with 3 sets of tabbed fins inside, Model 3050 3-Stage Mixer installs in-line providing thorough mixing with low head loss. Product dissolves peracetic acid into influent water at 4,620 gpm, and produces 1.64 K value and typical CoV of 0.014. Fabricated from carbon or stainless steel, with or without Teflon® coating, 16 in. x 6 ft long mixer is clog-resistant,...

Read More »
Double Planetary Mixers feature special finger blades.
Impeller / Propeller / Turbine - Agitators / Mixers

Double Planetary Mixers feature special finger blades.

Available on Double Planetary Mixers, rectangular stirrers with upward rake fingers rotate on their own axes while orbiting vessel on common axis, making mixers suitable for batching dry powder blends, wet granulations, and similar formulations.Â- Interchangeable helical blades are available and allow mixers to be utilized for viscous pastes and putty-like materials. Available in industrial...

Read More »
Chemical Resistant, High Strength Two Component Epoxy Withstands Elevated Temperatures
Repair Kits

Chemical Resistant, High Strength Two Component Epoxy Withstands Elevated Temperatures

With the ability to withstand acids, bases and many solvents, Master Bond EP62-1 is primarily used as an adhesive, sealant or coating where the epoxy will be exposed to very harsh conditions. This two part epoxy features thermal stability with a glass transition temperature exceeding 170°C. EP62-1 has a long working life of over 12 hours at ambient temperatures and a forgiving 100 to 10 mix...

Read More »
Bench-Top Laboratory Mixer handles multiple mixing tasks.
Impeller / Propeller / Turbine - Agitators / Mixers

Bench-Top Laboratory Mixer handles multiple mixing tasks.

Multi-purpose HSM-100LCI-T is offered with interchangeable mixing attachments. With 16 in. clearance under mixing attachment and 12 in. distance between feet (base) enable use with different size vessels, mixer is capable of such tasks as powder wet-out and dispersion, deagglomeration/particle size reduction, solubilization, emulsification, and homogenization. Unit has Type 316 stainless...

Read More »
Folding Impellers install through mixture mounting nozzle.
Mixer and Agitator Propellers / Impellers

Folding Impellers install through mixture mounting nozzle.

Available in sizes up to 210 in. in diameter, Folding Blade HYFLO 218 Impellers are intended for new and retrofit installations where tank entry is not practical. UnitsÂ- feature hydrofoil-style, 4-blade design that folds for installation and opens with centrifugal force, locking in place when fully opened. Blade locking mechanism can be accessed from outside tank for removing mixer, if...

Read More »
EcReCon Announces New Inventory of Process Equipment from a Food Manufacturing Plant
Diaphragm Pumps

EcReCon Announces New Inventory of Process Equipment from a Food Manufacturing Plant

Ecrecon, Inc. has added new inventory of equipment from a food manufacturing plant. The equipment available includes two 100 gallon Liquefiers and two 200 gallon Liquefiers, one 850 Gallon stainless steel Double Ribbon Blender, 55 Gallon Stainless Steel drums, several 350 Gallon Jacketed Kettles, 350 and 600 Gallon GROEN Jacketed, Double Motion Agitators, a 2000 Gallon Sanitary Mix Tank with...

Read More »
Sample Prep Equipment is available for QuEChERS method.
Impeller / Propeller / Turbine - Agitators / Mixers

Sample Prep Equipment is available for QuEChERS method.

Designed to simplify safe and effective QuEChERS Sample Preparation, 1500 ShaQer™ agitates up to 6 samples simultaneously (compared to 2 by hand). Vertical clamp movement optimizes extraction, and there is no variation in agitating process. This ensures equal extraction conditions for all samples. UnitÂ- is also capable of accommodating various tube sizes and shapes.

Read More »

All Topics