Mixers (Fluid Blending)

Mixers (Fluid Blending)

Mixing System allows anaerobic digestion in various markets.

Momentous Flow(TM) provides mixing for anaerobic digestion in wastewater, biofuels, and agricultural markets. It uses single Z/T=3.0 axial impeller and no baffles in upper part of vessel to create centrifugal force, which pushes membrane methane bubbles from anaerobic digestion to center of rotation. Methane then coalesces and escapes from liquid into collection cap. Mixing system also features...

Read More »
Static Injection Mixer blends additives into gasoline.
Mixers (Fluid Blending)

Static Injection Mixer blends additives into gasoline.

Used for blending ethanol and other additives into gasoline and other fuels, Static Mixer is heavy-wall 316 SS fixed plate which features orifice pattern that mixes by combination of alternate vortex shedding and intense shear zone turbulence to achieve greater than 98% dispersion within 10 diameters downstream. Designed to fit inside mating flange bolt circle of any piping system, mixer is...

Read More »
Hosedown Stations safely blend steam and cold water.
Mixers (Fluid Blending)

Hosedown Stations safely blend steam and cold water.

STVM-iLoc steam/water hosedown stations provide hot water by blending steam and cold water to required set temperature for washing down walls, floors, process equipment, and vehicles. Automatic station shutdown turns off system if temperature is raised 15°F above maximum set temperature or if cold water supply is interrupted. Designed to reduce effects of scaling and mineral build-up,...

Read More »
Gas Standards Generator utilizes modular, 2-stage dilution.
Mixers (Fluid Blending)

Gas Standards Generator utilizes modular, 2-stage dilution.

Modular gas standards generator 491M/B/SD dynamically blends precisely known VOC/TOC gas standards with parts-per-billion and parts-per-trillion analyte concentrations. In first stage, 491M/B combines analyte flow from Trace Source(TM) permeation tubes with precisely controlled flow of pure dilution gas to form parts-per-billion concentration mixture. Second stage, 491M/SD, further dilutes...

Read More »
Mixers (Fluid Blending)

New Mixing Technology Offered by Ashland Eases Adhesive and Sealer Application

DUBLIN, Ohio - A new mixing technology for two-part adhesive and sealer applications is now part of the PLIOGRIP® by Valvoline body repair system from Ashland Inc. (NYSE:ASH). The 18-element SuperQuadro(TM) static mixer from Sulzer Quadro Systems will be introduced with the new larger format 400ml and 600ml PLIOGRIP by Valvoline products for the truck repair market. The new mixer will be...

Read More »
Mixers (Fluid Blending)

Ultra Foammix Applicators Improve Performance of Hot Melt Adhesives

DULUTH, Georgia - February 9, 2007 - Ultra FoamMix applicators from Nordson Corporation (Nasdaq-NDSN) mix hot melt adhesive with inert gas to create a homogeneous solution that improves adhesive characteristics. When dispensed the gas expands to create a closed-cell foam beneficial to a wide variety of bonding, sealing, gluing and gasketing applications In addition to improved production and...

Read More »
Mixers (Fluid Blending)

Flue Gas Desulfurization Process Flow Enhanced with Chemineer Products

Dayton, Ohio - Chemineer offers various products designed to enhance the Flue Gas Desulfurization (FGD) process flow. Globally, Chemineer is a leading supplier of mixing solutions and products for FGD systems. Thousands of Chemineer agitators are currently operating in FGD service. Due to efficiency and reliability, many of these agitators have been in operation for decades. Chemineer's...

Read More »
Mixers (Fluid Blending)

Pre-Cooked Bacon Gains Map Shelf-Stability with Self-Adjusting, O2 CO2 N2 Online Gas Mixing and Monitoring

Glen Rock, NJ: Pre-cooked bacon, accounting for 2 billion pounds or over 70% of the U.S. bacon market, requires superior air-tight leak free barrier film packaging that can be monitored and adjusted online by PBI-Dansensor America's gas analyzers, gas mixers, flow controller and leak detection equipment. "The ability to analyze the modified atmosphere gas, adjust the gas mix, control the gas flow...

Read More »
Static Mixers Used As Continuous Cookers
Mixers (Fluid Blending)

Static Mixers Used As Continuous Cookers

Ross SysCon, a leader in the design and manufacturing of Static Mixers, recently completed a mixer for use as a continuous cooker in the food industry. The LLPD design is typically used for low viscosity turbulent flow mixing of fluids. In this case, it was supplied with a special steam sparging system down the center of the 3 diameter mixer, to permit the continuous cooking of a pasty food...

Read More »
Static Mixer flattens head loss over varying flow rates.
Mixers (Fluid Blending)

Static Mixer flattens head loss over varying flow rates.

Suitable for any fluid handling system, variable flow Model 2900 utilizes 2 in-line wafer type mixers, one fixed with 0.9 Beta ratio and one variable with 0.7 Beta ratio and that adjusts incrementally to adapt to changing flow conditions. Featuring automatic modulation to maintain 3 psi regardless of flow rate, mixer flattens head loss at max flow, while providing consistent mixing over 20:1...

Read More »

All Topics