Flow Switch offers response time of 1 to 10 seconds.
GT10 Thermo-Flo(TM) Gas Flow Switch provides flow detection and switching from 1 to 90 fps. Setpoint can be changed with single-turn of adjustment knob, which doubles as LED indicator for flow/no-flow status indication. Short version probe is for use in ducting from 1/2 to 1 1/2 in., while longer version is applied from 2 in. up. All-plastic sensor construction is either PP/Ryton(R) or PVDF...
Read More »
Crosspoint Switches operate up to 3 Gpbs from 2.5 V supply.
SY55854U 3Gbps single 2x2 CML switch, in 16-pin QSOP package, operates from supply voltage as low as 2.3 V. Output channel-to-channel skew is guaranteed to be less than 15 ps over temperature and voltage. SY55858U and SY55859L dual 2x2 CML switches come in 32-pin TQFP and 32-pin MLF packages, respectively. SY55858U includes flexible, 3-pin input stage. SY55859L operates up to 2.7 Gbps and...
Read More »
Flow Switch features in-line design.
FS-380P is constructed with polypropylene housing, PPS composite pistons, 316 wetted parts, and fluorocarbon O-rings. Operating pressure is 200 psi @ 70 deg F and 100 psi @ 212 deg F. Fixed set points range from 0.25 to 2.0 gpm. Switch is offered with 3/8 in. MNPT or quick disconnect ports and selection of mating connections including NPT, BSP, barb, and tube connections. Switch action is SPST 10...
Read More »
Turnkey System provides DC/RF/Opto hybrid switching.
Fully integrated System 40 can consist of Keithley 7001 or 7002 switch controller, and switches, attenuators, couplers, and other components integrated into 19 in. rack-mount package. Choice of 40 types of cards provide custom switching options for up to 400 channels. Interconnecting ATE through pre-programmed System 40 improves utilization of automated instruments such as communication analyzers...
Read More »
5 Questions to Ask When Choosing a Custom Glass Manufacturer
Due to the inherent complexity of glass fabrication, many professionals seeking glass services know exactly what kind of part is needed, but are unclear on the intricacies of the actual manufacturing process. PEG's exclusive guide is designed to help professionals navigate the custom glass manufacturing process with valuable information.
Read More »
Flow Switches are tough and moisture resistant.
Enhancements to FS-4 Series make them more physically robust and improve moisture resistance. They have more robust inlet/outlet port hubs and uniform wall thickness around internal port threads to better withstand rough installation techniques and other abuses. Subassembly is sealed with molded rubber grommet moisture barrier. Separate snap-on reed switch improves set point accuracy. Series...
Read More »
Photo Control turns on lights automatically.
NightStar(TM) electronic roadway twistlock photocontrol provides consistent day to day, season to season, turn on/ turn off control for maintaining critical time of day light levels. It has fully encompassed filtered silicon sensing element and heat dissipating mechanical for standard and high temperature applications.
Read More »
Optical Switch Cards automate test applications.
Model 7090 1x16 optical switches route single signal to 16 DUTs or 16 instruments. They switch optical signals in 1290 to 1650 nm range and use single mode fibers with FC/SPC and FC/APC connectors. All Model 7090 cards are compatible with company's GPIB-programmable Model 7001 and 7002 switch mainframes. Switches can be used in combination with Model 7090 1 x 4 and 1 x 8 optical versions, plus DC...
Read More »
Video Switch suits CCTV security monitoring.
Model 8508 8-channel video switch allows pushbutton selection of video from up to 8 sources. Signals from remotely located CCTV cameras are selected for viewing by high impedance video monitor at midpoint of security network or by low impedance video monitor at network's endpoint. All connections are made at rear panel of switch via BNC connectors. Maximum EMI/RFI shielding is attained by...
Read More »
Capacitor Switch provides 100,000 operations.
VerSaVac(TM) II LE pole top capacitor switch has long life solenoid operating mechanism that operates as low as 80 Vac. No oil or gas is used for interruption or insulation. Switch can be used to replace existing oil switches or used with new capacitor banks. VerSaVac II LE can also be used in conjunction with Zero Voltage Closing Control, which mitigates transients associated with bringing...
Read More »
Liquid Flow Switch has PP/Rytron® or PVDC construction.
Model FT10 Thermo-Flo(TM) offers adjustable switch setpoints from 0.04 to 3 fps. LED indicates flow or no-flow status, and relay or FET output provides secure interface with remote devices. Two probe lengths, one for pipe sizes from 1/2 to 1 1/2 in., and one for 2 in. and up, are available. Thermal dispersion flow switch measures liquid temperature to determine changes in flow velocity, and is...
Read More »
More performance and functionality for Sinumerik 828D CNC
Siemens new SINUMERIK 828D ADVANCED, SINUMERIK 828D and SINUMERIK 828D BASIC sets the standard for productivity enhancements of turning and milling operations on standardized machines and simplify the automation of grinding machines. See our video to learn all about it.
Read More »
