Miscellaneous Switches

Tool Switches provide speed control.
Miscellaneous Switches

Tool Switches provide speed control.

Single-pole, single-throw N Series Switches are rated for up to 200,000 operation cycles and have contact current ratings of 10 A at 125 Vac or 6 A at 250 Vac. Line voltage wires can be terminated by screw or push-in methods. Motor and capacitor connections are push-in. Switches are suited for professional power tools such as drills, drivers, hammer drills, shears, and nibblers. They can be...

Read More »
Thermal Dispersion Flow Switch offers solid state detection.
Miscellaneous Switches

Thermal Dispersion Flow Switch offers solid state detection.

Available in Polypropylene/Ryton or PVDF wetted materials and 3 or 4.5 in. lengths, Series TDS monitors and controls flow of non-coating liquids. It provides SPDT output for interfacing with remote PLC or relay control devices and features selectable NO or NC operation. Adjustable switch point is factory calibrated at 0.2 fps, and unit provides LED indication of flow and calibration status.

Read More »
Switch Modules meet needs of automated test equipment.
Miscellaneous Switches

Switch Modules meet needs of automated test equipment.

Models PXI-2530 and SCXI-1130 are high-density, 128-channel and 256-channel, multi-configuration multiplexers/matrices with 14 possible topologies and switching speed of 900 ch/s. Model PXI-2529 brings 128-crosspoint, 2-wire matrix to single-slot 3U PXI module. It can switch up to 150 Vdc or 150 Vrms CAT I and up to 1 A switching/2 A carry. Models PXI-2567 and SCXI-1167 are 64-channel relay-drive...

Read More »
Analog Switches have less than 0.002% THD.
Miscellaneous Switches

Analog Switches have less than 0.002% THD.

Switches offer ON Resistance from 1.0-1.35 ohms which preserves signal integrity and lowers drive necessary to support audio and signal processing. Operating voltage ranges from 1.65-5.5 V, Total Harmonic Distortion is 0.002% typ, and RON flatness is 0.2 ohm typ. Offered in SPDT, SPST/NO, and SPST/NC configurations, they accommodate overcharges of up to 4.6 V, have greater than 350 MHz bandwidth,...

Read More »
Switch System simultaneously monitors multiple doors.
Miscellaneous Switches

Switch System simultaneously monitors multiple doors.

Model L 4000 system safety photoelectric switch system safeguards hazardous areas on machinery and access to restricted areas. Type 4, non-contact safety device includes UE 401 evaluation unit, which monitors functioning of sensor and generates cut-off signal if light path is interrupted. Up to 4 individual sensor pairs or 8 cascaded pairs can be connected to unit. Switches are available with...

Read More »
Analog Switches are suited for portable instruments.
Miscellaneous Switches

Analog Switches are suited for portable instruments.

Quad (STG3699) and dual (STG3684) SPDT analog switches include multiple Single Pole Dual Trough cells and can work in bi-directional mode using 1.8 V compatible digital control pins. Housed in 3 x 3 mm QFN packages, they offer on-resistance of less than 0.5 Ohm and switching times of less than 300 ps. Characteristics include operating voltages of 1.65-3.6 V, support for current up to ±500...

Read More »
Crosspoint Switches ensure low noise and low jitter.
Miscellaneous Switches

Crosspoint Switches ensure low noise and low jitter.

Models SN65LVCP22 and SN65LVP23 are 2 x 2 crosspoint switches that provide 2:2 buffering, 1:2 splitting, and 2:1 multiplexing. Model SN65LVCP22 supports LVPECL/CML to LVDS level translations, while Model SN65LVCP23 supports LVDS/CML to LVPECL level translations. Both feature 50 ps peak-to-peak jitter, 1.7 ns switch time, and operating temperature of -40 to +85°C. They meet redundant serial...

Read More »
Vibration Monitor is CSA certified.
Miscellaneous Switches

Vibration Monitor is CSA certified.

Enclosed in water-tight, industrial-type housing, Model 550-CSA Vibration Switch monitors rotating machinery operating at 120-60,000 rpm for excessive vibration caused by unbalance, worn bearings, mechanical looseness, and broken parts. Product features 2 adjustable vibration limits with time delays, limit LED indicators, system test button, and automatic limit resets.

Read More »
Switch Modules track/store number of relay cycles in system.
Miscellaneous Switches

Switch Modules track/store number of relay cycles in system.

Models NI PXI-2593 and NI SCXI-1193 RF switch modules offer 16 channels in PXI and 32 channels in SCXI, 500 MHz bandwidth, 50 ohm characteristic impedance, 10 W RF carry power, 150 V CAT I switching, and MCX direct connectivity. Models NI PXI-2566 and NI SCXI-1166 general-purpose switch modules offer 16 independent SPDT relays in PXI and 32 in SCXI. Modules also feature switching capacity of 2 A...

Read More »
Current Switches are self-powered.
Miscellaneous Switches

Current Switches are self-powered.

CS Series switches combine current transformer, signal conditioner, and limit alarm into one package. Units offer selectable current input range, universal solid-state outputs, and LED indication for local display of switch status. Products are available in split core or solid core case.

Read More »

All Topics