Miscellaneous Materials

Material System produces plastic prototypes.
Prototyping Systems

Material System produces plastic prototypes.

System zp®250 includes powder, binder, and Z-Snap(TM) flexible epoxy infiltrant for use with proprietary 3D printers. Prototypes made from system are extremely tough and display flexible properties of plastic, allowing them to be used in variety of functional testing applications. Material is best suited for making parts that will be aggressively handled during testing or assembly process.

Read More »
Prototyping Systems

Materials are offered in varying densities for design work.

Medium Density Epoxy SRP boards, used for creating design models, have 42 lb/ftÂ-³ density and 68 Shore D hardness. Resistant to organic solvents, they offer heat resistance greater than 284ºF. Used for creating styling models or negative molds for casting, Ultra Low Density Urethane SRP boards have 15 lb/ft³ density and 27 Shore D hardness. Suited for milling foundry...

Read More »
Coatings

Coatings are suitable for resurfacing floors and walls.

Based on pure polyurea, Tough-Cote URC, Tough-Cote URM, and Tough-Cote URR are seamless, flexible coatings that offer water- and chemical-resistance. Products are 100% solids, 2-component, pure polyurea elastomers, and can be applied at temperatures from -40 to +350°F. Coatings, formulated with UV stabilizers, can be applied to metal and roofing substrates, including concrete, foam, and...

Read More »
Hardsurfacing Alloy suits high-impact/abrasion applications.
Miscellaneous Materials

Hardsurfacing Alloy suits high-impact/abrasion applications.

Developed for application with efficient PTA (Plasma Transferred Arc) deposition equipment, Colmonoy 80PTA is supplied as powder with uniform size distribution. Composite material contains high volume (60%) of abrasion resistant tungsten carbide particles (3500 DPH) in soft (HRC 30) impact-resistant nickel base matrix alloy. Tungsten carbide provides abrasion resistance while nickel matrix offers...

Read More »
Micro-Porous Materials suit material handling applications.
Composites

Micro-Porous Materials suit material handling applications.

METAPOR materials are based on formulation of metal or ceramic powders and epoxy binders. They are highly machinable and produced in plate form in range of standard sizes. METAPOR BF 100 AL is aluminum based and offers temperature resistance up to 230°F. METAPOR BF 210 AL is aluminum based and can be used in temperatures up to 460°F. METAPOR MC 100 AL is aluminum based and highly...

Read More »
Coating System prevents floor erosion.
Coatings

Coating System prevents floor erosion.

Tigerguard(TM) coating system provides high mil barrier on floors that need to stand up harsh conditions. It offers durable surface that is easy to clean and maintain, and adds high gloss shine to work environments. It also provides superior gloss retention, fills in surface defects, and resists mars, scratches, abrasion, chemicals, and impact. Tigerguard system requires no special skills for...

Read More »
Dielectrics offer low loss characteristics for RF modules.
Miscellaneous Materials

Dielectrics offer low loss characteristics for RF modules.

MICROLAM® 610 dielectric minimizes dielectric cracking and provides PCB mechanical reliability. Reinforced microvia material consists of FR-4 epoxy resin and continuous toughening matrix. MICROLAM® 620 dielectric suits chip package substrates. It consists of thermoset resin in reinforcing matrix with moisture resistance and mechanical reliability. MICROLAM® 630 dielectric...

Read More »
Floor Repair Material does not spread to surrounding areas.
Cement

Floor Repair Material does not spread to surrounding areas.

F-161 MAGIC FLOOR(R) provides permanent repair to indoor or outdoor floors. Application steps includes priming, spreading MAGIC FLOOR into cracks or holes, and compressing. Patch sets up and is immediately ready for traffic. Its shatterproof aggregate and thermoplastic binder material adheres to hard surfaces and hardener prevents tracking onto surrounding concrete.

Read More »
Polyimide Parts meet outgassing and ionic purity standards.
Polyimide

Polyimide Parts meet outgassing and ionic purity standards.

Pyropel HD thermoset polyimide machining stock, suitable for manufacturing parts subject to high temperatures or chemical attack, offers temperature resistance to 550 deg F. It is available machined to print or in standard 12 x 12 in. plates in thicknesses up to 1 in. Applications include metal welding and cutting equipment; wafer processing equipment; soldering fixtures; high-pressure thermal...

Read More »
Concrete Repair Formulation suits high-traffic areas.
Cement

Concrete Repair Formulation suits high-traffic areas.

Traffic Fast(TM) mix and pour, shallow crack concrete repair sets up in 2 hours. High-bond liquid polymer stands up to industrial use. Self-leveling Traffic Fast eliminates need for extensive key cutting. Suitable for use on loading docks, shipping/receiving platforms, bridge decks, warehouse, and plant traffic lanes, Traffic Fast binds instantly without priming.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers