Automatic Wall Switch detects occupancy.
SuperSwitch(R) uses passive infrared technology to automatically turns lights off when room is vacated and adjust itself to make sure lights stay on when someone is in room. It adjusts sensitivity and time delay automatically and immediately in response to occupant behavior, eliminating need to learn behavior patterns over time. It can cut lighting energy usage by 30% during peak hours, and 90%...
Read More »
Cylinder stays in position.
Model RA/8000 servo-controlled cylinder provides exact positioning of piston through electrical or pneumatic control signal as to be held in any desired position, even under changing load conditions. Positioning feedback mechanism included with cylinder links controller to piston rod. Cylinder is available in 63 to 320 mm dia, with stroke lengths from 100 to 600 mm, and electro-pneumatic (4 to...
Read More »
Cylinder stays in position.
Model RA/8000 servo-controlled cylinder provides exact positioning of piston through electrical or pneumatic control signal as to be held in any desired position, even under changing load conditions. Positioning feedback mechanism included with cylinder links controller to piston rod. Cylinder is available in 63 to 320 mm dia, with stroke lengths from 100 to 600 mm, and electro-pneumatic (4 to...
Read More »
Stepping Motors come with on-board drivers.
MDrivel4 has NEMA size 14 stepping motor with half/full step drive, suitable for situations with space constraints. MDrive34 has NEMA size 34 high torque stepping motor with 24 to 75 V microstepping drive electronics, suitable for applications such as packaging, or applications using servo motors or gear box. Options include encoder or knob for manual positioning. Also available are MDrive23 and...
Read More »
Air Amplifiers and How They Work
Air amplifiers are pneumatically driven devices that use shop air to provide the motive power for increasing air pressure. This white paper provides an in-depth overview into the air amplifiers and how they work.
Read More »
Stepping Motors come with on-board drivers.
MDrivel4 has NEMA size 14 stepping motor with half/full step drive, suitable for situations with space constraints. MDrive34 has NEMA size 34 high torque stepping motor with 24 to 75 V microstepping drive electronics, suitable for applications such as packaging, or applications using servo motors or gear box. Options include encoder or knob for manual positioning. Also available are MDrive23 and...
Read More »
Motion Controller plugs into Mitsubishi PLC.
RMC100 for Mitsubishi FX2N Programmable Logic Controller (PLC) provides up to 8 axis of motion control with ability to change motion control profiles at will. Its internal motion controller step tables allow faster PLC scan rates, provide position and pressure control, and allow PLC access to all its registers. More than 600 words of code are possible, with more available in data format.
Read More »
Motion Controller plugs into Mitsubishi PLC.
RMC100 for Mitsubishi FX2N Programmable Logic Controller (PLC) provides up to 8 axis of motion control with ability to change motion control profiles at will. Its internal motion controller step tables allow faster PLC scan rates, provide position and pressure control, and allow PLC access to all its registers. More than 600 words of code are possible, with more available in data format.
Read More »
DIN Controller operates safety light curtain.
LCM-3 allows up to 8 channel-select patterns to be selected and stored using 8-position binary switch, making it suitable for applications where variety of materials are inserted through protected field of light curtain, such as press operations and post-extrusion processing. Pattern function can be controlled with PLC. Controller has 2 PNP solid-state safety outputs, 2 auxiliary outputs, and...
Read More »
DIN Controller operates safety light curtain.
LCM-3 allows up to 8 channel-select patterns to be selected and stored using 8-position binary switch, making it suitable for applications where variety of materials are inserted through protected field of light curtain, such as press operations and post-extrusion processing. Pattern function can be controlled with PLC. Controller has 2 PNP solid-state safety outputs, 2 auxiliary outputs, and...
Read More »
Power Control System parallels multiple gen-sets.
Series 7700 measures 24 in. D x 24 in. W x 72 in. H, and can control 2 engine-generator sets in 1 control section. Single section includes all digital controls and meters to start, synchronize, and control sets for emergency and prime power applications. Using integrated control logic, system transfers highest priority block load to first gen-set that produces acceptable voltage and frequency....
Read More »
The Carbontec System: A Smarter Way to Heat Your Buildings
Carbontec's paper-thin radiant heating systems reduce energy consumption costs by warming the building surfaces instead of controlling air temperature. Check out our video to learn more.
Read More »
