Miscellaneous Controls

Motion Control Chip handles one stepping motor.
Miscellaneous Controls

Motion Control Chip handles one stepping motor.

Single-axis PCD-4511, for two-phase unipolar or bipolar stepper motors, can output CW/CCW pulses or excitation signals directly to drive chips. It has sequence logic for full and half step modes, simultaneous start and stop, linear or S-curve acceleration and deceleration, idling pulse output for start, and various limit signals. Applications include semiconductor manufacturing, inspection...

Read More »
Welding Inverter provides soft or crisp MIG arc control.
Miscellaneous Controls

Welding Inverter provides soft or crisp MIG arc control.

Invertec V350-PRO has integrated control panel that eliminates cable clutter and pendant confusion. Constant power MIG mode adjusts voltage and current for smooth welding of thin sheet metal. It has pulse programs for steel, stainless steel, aluminum, 4043 and 5356 alloys and nickel. Unit offers output on single phase or three phase input power. It produces constant current or constant voltage...

Read More »
Digital Valve Driver works with valves, motors and pumps.
Miscellaneous Controls

Digital Valve Driver works with valves, motors and pumps.

Programmable DVD-2 pulse width modulated (PWM) solenoid driver can control any brand proportional valve, motors, pumps or other device that responds to PWM signals. Software-based unit operates by processing low power analog input signal to produce corresponding high power, high efficiency PWM output signal. Source of analog signal could be control levers, potentiometers or PLC. Unit comes in...

Read More »
Motion Controller Board handles 4 axes simultaneously.
Miscellaneous Controls

Motion Controller Board handles 4 axes simultaneously.

Double size PC-MIP board can be used on CompactPCI, PCI, VME and embedded platforms with high speed PCI bus interfaces. Chipset supports steppers, sinusoidal commutation of brushless motors, and positioning and velocity control of brush servo motors. Any axis can be selected to be brush or brushless. Instruction set supports 130 commands plus selectable profiling modes including S-curve,...

Read More »
Motion Control Chip drives stepper motors.
Miscellaneous Controls

Motion Control Chip drives stepper motors.

2-axis PCD-4521 controls two-phase unipolar or bipolar stepper motors. Sequence logic for both full and half-step modes is built-in. It can output CW/CCW pulses or excitation signals directly to drive chips, provides independent control of each axis, and controls simultaneous start and stop of all axes. Features include linear or S-curve acceleration and deceleration and idling pulse output for...

Read More »
Contouring Control fits cycle-controlled lathes.
Miscellaneous Controls

Contouring Control fits cycle-controlled lathes.

MANUALplus 4110 control program machines complex workpieces on lathes with one spindle, X and Z axes, C axis or positioning spindle, and driven tool. Supporting interactive lathe operation and G-code, it performs simple operations like manual lathe. For complex contours, graphical Interactive Contour Programming calculates missing coordinates or shows mathematically possible variants so user can...

Read More »
Control System optimizes engine performance.
Miscellaneous Controls

Control System optimizes engine performance.

Engenius ESM Engine System Manager, directed by Engine Control Unit (ECU) monitors speed, pressure, temperature and other engine conditions; controlling ignition timing, speed governing and stop/start functions. It also provides diagnostic help and fault logging when requested. System can be packaged to instantly communicate to Internet server, computer, phone or pager via satellite, cellular...

Read More »
Motion Control Chipsets synchronize multiple axes.
Miscellaneous Controls

Motion Control Chipsets synchronize multiple axes.

Navigator and Pilot chipsets control brushed dc servos, brushless dc servos, steppers, and microsteppers. Navigator handles 4 axes, while Pilot handles 1. Multi-chip synchronization allows more than 4 axes of motion to be coordinated between any combination of Navigator and Pilot chips. It also allows physically remote or distributed chips to be synchronized within microseconds so they can be...

Read More »
CNC Retrofit Kit fits older boring mills.
Miscellaneous Controls

CNC Retrofit Kit fits older boring mills.

Vega MILM-B Mill PC-based CNC retrofit package helps shops rejuvenate older machines. CNC has handwheel, joystick, and pushbutton jog interfaces, manual tapping, programmable cycles, mirroring and scaling, color LCD display, 32-bit CPU, hard disk, floppy disk and CD ROM. Retrofit package includes on-site installation and operator training. System can interface with both ac and dc servo systems.

Read More »
Sponsored

Simple Connection – MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics