Miscellaneous Controls

Motion Control implements binary communication protocol.
Miscellaneous Controls

Motion Control implements binary communication protocol.

Capable of controlling 1 brushed dc motor, Motion Mind provides 9 A continuous and 25 A peak. Open loop control can operate with serial data input, button presses, analog control signals from 0-5 V, and pulse control from R/C type signal. Closed loop control requires 2-channel quadrature encoder or analog feedback signal from 0-5 V. Electrically, Motion Mind can communicate at RS232 levels...

Read More »
Benchtop Platform provides active vibration isolation.
Miscellaneous Controls

Benchtop Platform provides active vibration isolation.

Series 8001 features microprocessor that uses feedback to sense vibrations and provide immediate responses to eliminate them. Rapidly adjusting to different loads without user intervention, unit dynamically isolates all 6 translational and rotational modes of vibration and actively damps vibrations from 1.0-1,000 Hz. Available in 4 sizes from 16 x 18 x 3.25 in. to 24 x 31 x 5.25 in., portable...

Read More »
Motion Processor controls multiple motor types.
Miscellaneous Controls

Motion Processor controls multiple motor types.

Requiring external amplifier to operate, Magellan(TM) MC50110 single-IC provides dedicated, single-axis control for dc brush, brushless dc, microstepping, and pulse and direction motors. Unit is driven by host microprocessor using 8 or 16-bit parallel bus, CANBus 2.0B, or asynchronous serial port. It provides 32-bit position error, dual bi-quad filters, 50 Â-µs loop time, and multi-chip...

Read More »
Miscellaneous Controls

PCI-Bus Motion Controller controls up to 12 axes.

Suited for PC-hosted automation, NextMove PCI-2 incorporates 120 MHz, 32-bit floating point DSP core. It accommodates position feedback data at rates as high as 10 MHz and features servo loop update time of 100 Â-µs. For controlling servo or vector drives, unit generates ±10 V analog output signals with up to 16-bit resolution. It is supplied with Mint multitasking machine control...

Read More »
Miscellaneous Controls

Motion Controller offers fixed speed-scan movement control.

Suited for control-and-scan instrument applications, Preprogrammed Scanning Controller, Model SR1000, instantly reaches optimal smoothness when acceleration starts from zero level. Single-axis unit features selectable functions such as 2 predefined running speeds that allow system to run rates of SLOW to HIGH and HIGH to SLOW, option to achieve S-curve acceleration rates, panel of control input...

Read More »
Lighting Contactor is designed for branch circuits.
Miscellaneous Controls

Lighting Contactor is designed for branch circuits.

Requiring momentary 20 A applied current to open or close, multi-pole Bulletin 500LC is controllable from multiple sources. Contactor connects with various control systems and devices and can have 2-wire, 3-wire, and start/stop control to allow it to interface with remote objects. With small footprint and four screw mount, unit installs within, or next to, enclosures and is UL 508 listed, CSA...

Read More »
Motion Controller monitors multiple axes over network.
Miscellaneous Controls

Motion Controller monitors multiple axes over network.

Maestro Multi-Axis Motion Supervisor provides synchronized motion control, interpolated 2D/3D, as well as sequencer controlling event handling of axis and I/O as CANopen master. It operates as Ethernet-CAN gateway, delivering direct access to axis level for setup, real-time monitoring, and analysis. Network-based tool comes with single or dual CANopen ports for control of up to 126 axes and 2-16...

Read More »
Miscellaneous Controls

Gas Ignition Controls run on 24 or 120 Vac.

Intermittent Pilot models 35-73 and 36-63 are microprocessor-based and polarity insensitive. With repeatable timing sequences, they provide TFI times up to 120 sec, local and remote flame sense options, as well as thermostat/power off and automatic reset options. Fenwal 35-73, available in PCB only, case and cover, and potted configurations, is suited for controlling pilot and main gas valves,...

Read More »
Analog Control works with handheld and portable devices.
Miscellaneous Controls

Analog Control works with handheld and portable devices.

Ergo-NAV 360° and N-way variable-rate pointing and navigation control device provides human interface device technology for portable devices. Pointing and navigation disk devices allow addition of applications such as GPS and MS Office through mouse-like navigation. Technology combines electrically variable resistive rubber sensor, plastic components, mechanical design geometries, and...

Read More »
Miscellaneous Controls

Motion Control System operates as Ethernet-CAN gateway.

Network-based multi-axis motion supervisor, Maestro, provides for multi-axis synchronized motion control and interpolated 2D/3D while also acting as sequencer controlling event handling. Available with single or dual CANopen ports, unit allows control of up to 126 axes and 2-16 axis of interpolated motion per CAN bus port. As CANopen master, Maestro offers network management, clock...

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers