Miscellaneous Controllers

Data Logger/Controller suits low-power applications.
Miscellaneous Controllers

Data Logger/Controller suits low-power applications.

Embedded Model TFX-11v2 provides 19 analog channels, 24 digital lines, 2 UARTs, up to 6.4 kHz sampling rate, and 2 Mbyte of Flash EEPROM memory. Minimum current draw is less than 100 Â-µA in low-power mode with up to 150 mA available for data acquisition or control tasks. Unit measures only 1.2 x 2.75 x 0.50 in. Logger/controller is user-programmed in Windows®-based TFTools Integrated...

Read More »
Development Kit evaluates real-time kernel.
Miscellaneous Controllers

Development Kit evaluates real-time kernel.

Â-µFlashTCP Development Kit provides evaluation of µC/OS-II Real-Time Kernel. When used together, software engineers and system integrators can learn and apply µC/OS-II into real-time embedded applications. Controller is a DOS based SBC powered by Intel 386Ex microprocessor. It is equipped with 10Base-T Ethernet port, 2 serial ports, 10 digital I/O lines, 512K SRAM and 512K...

Read More »
Microcontroller suits portable/handheld applications.
Miscellaneous Controllers

Microcontroller suits portable/handheld applications.

With on-chip peripherals, built-in precision clock generator, and standby current of less than 100 nA typical, model ACE1502 integrates ACEx(TM) family core with 2K bytes code EEPROM, 64 bytes each SRAM and data EEPROM, and I/O port with ±7 mA on each I/O pin. Suited for operating voltages from 1.8-3.6 V, unit is available in 8-lead and 14-lead configurations in SOIC and TSSOP packages....

Read More »
Miscellaneous Controllers

Microcontrollers offer quick start-up of 2 microseconds.

Models PIC16F630 and PIC16F676 14-pin PICmicro Flash microcontrollers feature analog-to-digital converter and internal oscillator. PMOS Electrically Erasable Cell process technology provides erase/write endurance, retention, and disturb reliability for program and on-chip data EEPROM memory. Typical standby current is 100 nA at 2.0 V, and operating voltage is 2-5.5 V. Units offer 1792 Kbytes of...

Read More »
Distillation 101: A Guide to Distillation and Separation Technologies
Sponsored

Distillation 101: A Guide to Distillation and Separation Technologies

Distillation is a separation unit operation that involves multiple countercurrent-stage steps, separating two or more volatile components. This results in the contact of liquid and vapor most generally in counterflow. Distillation 101: A Guide to Distillation and Separation Technologies provides an in-depth look at everything you need to know about distillation, including: Design procedures Equipment components Applications

Read More »
Miscellaneous Controllers

Microcontroller offers 16-bit peripherals.

Flash-based Model M16C/26 integrates voltage down converter and operates at full rated 20 MHz speed with low power consumption across voltage range of 3.0 to 5.0 V. It includes 4 Kbytes virtual EEPROM, 38 programmable I/O ports, eight 16-bit timers, and watchdog timer. Microcontroller is available in 7 x 7 mm, 48-pin QFP package. Applications include power management, instrumentation, remote...

Read More »
Microcontroller has clock speed of 40 MHz.
Miscellaneous Controllers

Microcontroller has clock speed of 40 MHz.

VERSA 1000 (VRS1000-40), 8-bit, 8051-based microcontroller offers In-System Programming (ISP) capability. Unit can serve as controller for applications that require up to 36 I/O pins and 64 K Flash memory for program, data, or both. On-chip Flash memory can be programmed in either serial or parallel interface with ISP feature. Available in 44-PLCC and 44-QFP packages, unit is multiple sourced and...

Read More »
Motion Controller supports CAN-based networking.
Miscellaneous Controllers

Motion Controller supports CAN-based networking.

Model XMP-SynqNet-PCI provides 100 Mbps, real-time, synchronous networking for up to 32 axes. Servos can be updated as quickly as 20 kHz for 4 axes, or 10 kHz for 8 axes. SynqNet also supports user-defined I/O CAN-based networking under industry operating systems such as Windows NT, Windows 2000 and 95/98, VenturCom, and VxWorks. Powered by 32-bit floating point Analog Devices SHARC DSP, heart of...

Read More »
Miscellaneous Controllers

Microcontrollers offer up to 1 Mbyte flash memory.

M32R/ECU 32-bit microcontrollers are designed for controller area network (CAN) automotive applications. With clock speed up to 80 MHz, they operate throughout temperature range of -40 to +125°C. FPU core is fully IEEE 754 compliant and supports logical address space of 4 Gbytes without segment switching. M32R/ECU#5 offers 1,024 Kbytes of flash memory with 48 Kbytes of RAM, and M32R/ECU#5HL...

Read More »
Mixed-Signal Microcontroller is offered in tiny packages.
Miscellaneous Controllers

Mixed-Signal Microcontroller is offered in tiny packages.

Model C8051F311 is available in tiny 5 x 5 mm 28-pin Micro Lead-Frame Package (MLP). Measuring 0.9 mm in height, package is compatible with standard surface mount production equipment. Microcontroller has high throughput 25MIPS 8051 CPU, 16 Kbytes Flash memory, and 25 I/O pins. Offerings include on-chip debug circuitry that facilitates full-speed in-system debug features such as single-stepping,...

Read More »
pH/ORP Controllers offer dual inputs.
Miscellaneous Controllers

pH/ORP Controllers offer dual inputs.

Offered in prewired NEMA 4X wall mount package, WDP Series controllers accept 2 electrode signals in any combination of pH and ORP. Their 4 control outputs may be used as on/off control relays or pulse proportional outputs. Each control output can be assigned to either electrode, and relays can be either high or low set point, high or low alarm, in-range or out-of-range alarm, or probe wash....

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics