Tapered Clip eliminates abrupt edges on pipes and joints.
Model J-170 transforms edge or lip at junction of pipes and joints to gradual surface transition. Sized to fit on structures using 28 mm diameter pipe, it can be added to existing units by snapping over pipe and sliding up to joint/pipe interface. Clip is 15 mm wide, with 28 mm ID that tapers to 33 mm OD, and suits plastic or metal joint assemblies. It provides snug fit with pipe diameter and may...
Read More »
Clip provides portable hole anywhere along strut.
CADDY® Easy Strut Clip (ESC) offers snap-in installation on side of any industry-standard strut profile. It provides Â-¼ in. portable hole anywhere along strut substructure and can also be used for efficient installation of cables, conduit, pipe, rod, support wires, and chains when factory-riveted to J-Hooks or conduit clips. Using existing strut framework, solution is suited for...
Read More »
DMM Kit improves safety and utility of digital multimeters.
Model CT3116 DMM Kit includes 2 fused probe bodies, 2 highly-flexible silicone jacketed leads, and 2 fully-insulated alligator clips. Leads are not affected by cold weather or hot soldering iron. Probes feature 4 mm contact tip and utilize internal ceramic fuses rated at 10 A. Alligator clips have IP2X connection covers which, when plugged into fused probes, maintain overall safety. All...
Read More »
Test Equipment Accessories are ergonomically designed.
SureGrip(TM) test tool accessories provide additional grip to reduce chance of probes slipping from users' hands or off component. Accessories include alligator clips and test leads, with rubber over-molded surfaces and finger-hugging curves for comfort and operational ease. All 11 accessories carry 1,000 V Category III/600 V Category IV safety ratings, making them safe for use in plant MRO,...
Read More »
Cold Forming: A Cost Effective Alternative to Machining Small Parts
Cold forming offers tight tolerances, dimensional stability, and advanced surface finishes, while also saving you in raw material wastes costs.
Read More »
Fused Probes/Test Accessories suit electrical applications.
Fused Probes and Test Accessories, compliant with International Safety Standard IEC61010, utilize ceramic fuses rated up to 10 A located near probe tips. With performance ratings from 1,000 V CAT III and 600 V CAT IV to 300 V CAT III, design includes flexible double insulated silicone leads that resist corrosive chemicals. Deluxe Test Probe Kits include two probes and one pair of heavy-duty...
Read More »
Fuse Clips are easily mounted.
Snap-in or Press-in 2AG, 3AG, and 5 mm PCB mounted fuse clips are rated for 6.3-15 A operation and are offered with or without orientation tabs and end stops to ensure safety. Tin plated, brass units enable low contact resistance and retain stable positioning during wave soldering. Vinyl fuse covers in 5 mm and 3AG sizes protect and insulate fuses.
Read More »
Test Clips feature CAT III, 1000 V, 10 A rating.
Medium-size, flex-boot alligator test clips attach to terminals up to .30 in. OD and include 5 models for temporary hands-free connection to test points within CAT I, II, or III 10 A test situations. Package includes 2 probe-tip adapters, 2 patch cords, and alligator clip for test lead attachment. Models comply with International Safety Standard IEC 1010 and feature nickel-plated steel clips and...
Read More »Retainer suits automotive interior trim applications.
Retainer Clip has over 300 lb average extraction effort and requires 12 lb of insertion effort. It functions properly within manufacturing variation limits. Clip is suitable for applications where strong joint load is critical such as side curtain airbags, airbag hardware, headliners, assist handles, and coat hooks.
Read More »
Low Insertion Retainer reduces installation effort.
Ergonomically designed low insertion retainer reduces installation effort into sheet metal panels by 60%, reducing risk of back injuries and wrist/hand disorders. Engineered and designed using Six Sigma Process, retainer reduces installation forces without sacrificing removal effort or clamping capability of the joint.
Read More »
Clip speeds trapeze hung installations.
AS Trapeze Clip integrates FAS (Fast Assembly System) by folding down a tab to securely hold wire cable tray in place. Clip is fastened to threaded rod by snapping it into proper sized groove, and folding tab upwards. It supports common sizes of threaded rod including 1/4, 3/8, and 1/2 in.
Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.
Read More »
