Forrest Manufacturing's Custom Woodworker II Continues to Grow in Popularity with Advanced Table Saw Operators
CLIFTON, New Jersey, January 24, 2006-Jay Forrest, Vice President of Forrest Manufacturing, announced today that demand for the company's Custom Woodworker II blade continues to grow among professional woodworkers and serious hobbyists. We're finding that more and more advanced table saw operators choose this excellent blade because of its outstanding versatility and performance. Craftsmen like...
Read More »Screwdriver Set includes variety of blades and bits.
Featuring fine-tooth, ratcheting screwdriver with anti-impact, soft-grip rubber handle, BRSDSET1 35-Piece Screwdriver Set includes 150 mm and 250 mm -¼ in. hexagon drivers, ¼ in. square drive screwdriver blade, and 290 mm ¼ in. hexagon driver flexible screwdriver blade. It also has 30 interchangeable bits in slotted, Phillips®, Pozidriv®, Torx®, and Tamper Proof Torx® sizes....
Read More »Screwdriver Set includes variety of blades and bits.
Featuring fine-tooth, ratcheting screwdriver with anti-impact, soft-grip rubber handle, BRSDSET1 35-Piece Screwdriver Set includes 150 mm and 250 mm Ã-¼ in. hexagon drivers, ü in. square drive screwdriver blade, and 290 mm ü in. hexagon driver flexible screwdriver blade. It also has 30 interchangeable bits in slotted, Phillipsî, Pozidrivî, Torxî, and Tamper...
Read More »Cutoff Inserts are available in 4 mm size.
Designed to aid in chip management, MTC-SEPARATOR Xtra (MTC-SX) Cutoff Inserts are available in 4 grades: M40 (-36), M43 (-13), M45 (-33), and M93 (-34). Each incorporates double V design that lends to stability as well as application-specific geometry that lends to surface finish quality and minimizes cutting pressure. Also available, MTC-SX-Ultra inserts feature application-specific geometry...
Read More »
The Ultimate Guide To UV Disinfection Lighting
This white paper provides a guide to UV disinfection lighting and their benefits over alternative disinfection methods.
Read More »Cutoff Inserts are available in 4 mm size.
Designed to aid in chip management, MTC-SEPARATOR Xtra (MTC-SX) Cutoff Inserts are available in 4 grades: M40 (-36), M43 (-13), M45 (-33), and M93 (-34). Each incorporates double V design that lends to stability as well as application-specific geometry that lends to surface finish quality and minimizes cutting pressure. Also available, MTC-SX-Ultra inserts feature application-specific geometry...
Read More »
Saw Blades offer multi-coated carbide construction.
Aggressor line of thin kerf, carbide tipped saw blades cut at 1,200 sfm and feature C-shaped hooked chip breaker. Multi-layer coated 350 x 2.8 x 100 mm tooth blade cuts 6 sq meters of 52100 bearing steel in 3.7 sec at 250 rpm. Saw blades cut tube, pipe and solid ferrous materials in flying cutoff and re-cutting applications. Carbide and cermet inserts are available.
Read More »
Saw Blades offer multi-coated carbide construction.
Aggressor line of thin kerf, carbide tipped saw blades cut at 1,200 sfm and feature C-shaped hooked chip breaker. Multi-layer coated 350 x 2.8 x 100 mm tooth blade cuts 6 sq meters of 52100 bearing steel in 3.7 sec at 250 rpm. Saw blades cut tube, pipe and solid ferrous materials in flying cutoff and re-cutting applications. Carbide and cermet inserts are available.
Read More »Circular Saw Blades cut common metal materials.
Suited for cutting angle iron, sheet metal, pipe, or steel plate, carbide-tipped Circular Saw Blades make smooth, clean cuts with minimal sparks and dust, eliminating need for secondary grinding operations. After cut, work piece is cool to touch and ready for immediate handling. Blades are designed for cordless, hand-held, and large diameter dry-cut metal cutting saws in diameters from 5 3/8-14...
Read More »Circular Saw Blades cut common metal materials.
Suited for cutting angle iron, sheet metal, pipe, or steel plate, carbide-tipped Circular Saw Blades make smooth, clean cuts with minimal sparks and dust, eliminating need for secondary grinding operations. After cut, work piece is cool to touch and ready for immediate handling. Blades are designed for cordless, hand-held, and large diameter dry-cut metal cutting saws in diameters from 5 3/8-14...
Read More »
Diamond Blades are color-coded by application.
Diamond Blades are manufactured with Laser Fusion(TM), which uses laser-generated heat to fuse mixture of synthetic diamonds and bonding material directly into blade core. In Segmented blades, every 5th segment is raised for aggressive cutting, while segmented gullets clear cutting path. Turbo blades keep serrated edge in constant contact with material for smooth action. Continuous Rim blades...
Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.
Read More »
