Honeywell's Solstice® Liquid Blowing Agent Used in New, Highly Durable Roof for Cleveland Airport
Spray foam system protects more than 500,000 square feet of roofing at Ohio's largest and busiest airport; roof is rated to resist severe hail MORRIS TOWNSHIP, N.J.Â- — Honeywell (NYSE: HON) announced today that its Solstice™ Liquid Blowing Agent (LBA) has been selected as a key component in the spray foam roofing system for the Cleveland Airport System, including multiple terminal and...
Read More »ADEKA to Attend Three Conferences and Have Stand at K Trade Fair
TOKYOÂ- – ADEKA Corporation (http://www.adeka.co.jp/en/chemical/index.html), a leading manufacturer of a wide range of excellent polymer additives that provide plastics with amazing performance, will attend three conferences, Polyolefin Additives 2013 in September, SPE (R) TPO Automotive Engineered Polyolefins Conference and ABC 2013 (Annual Blow Molding Conference), both in...
Read More »Air Products Provides Industrial Gas and Chemical Solutions for Specialty Chemical and Agrochemical Manufacturers
Company to Showcase Offerings at 2nd Annual Specialty Agro Chemicals America Show LEHIGH VALLEY, Pa. – Air Products (NYSE: APD) will be on-hand at the 2nd Annual Specialty & Agro Chemicals America show in Wilmington, N.C., from September 9-11 to discuss how the company's range of industrial gas and chemical solutions can help specialty chemical and agrochemical manufacturers improve process...
Read More »
Thixotropic Paste repairs corrosion defects to 2,000°F.
Bonding to cast iron, steel, and stainless steel, Pyro-Putty® 653 withstands continuous operating temperatures and rigorous thermal cycling to 2,000°F. Inorganic, single part, ceramic and metal filled paste can be applied to both horizontal and vertical surfaces in cross-sections up to Â-½ in. thick. Water-dispersible, environmentally safe, and resistant too most fuels, solvents,...
Read More »
Copper Infiltration Using Wrought Wire Infiltrant - Process and Productivity Improvements for Automotive Components
A comprehensive exploration of a new wrought copper alloy wire used in powder metallurgical infiltration methods.
Read More »Dow Corning Takes Prestigious 3D InCites Award for Its Advanced New Temporary Bonding Solution for 2.5D and 3D IC Innovation
MIDLAND, Mich. – Dow Corning, a global leader in silicones, silicon-based technology and innovation, announced that it has won a prestigious 3D InCites Award for its innovative new Temporary Bonding Solution for 2.5D and 3D IC packaging applications. Winning the Materials category, Dow Corning accepted the award at a well-attended, invitation-only ceremony held during last week's SEMICON West...
Read More »
Paint and Coating Stripper Designed to Remove CARC
Peabody, MAÂ- – D-Zolve CARC Remover from Solvent Kleene, Inc. was specifically developed to strip mil spec Chemical Agent Resistant Coatings (CARC) required on all combat equipment and combat support equipment. CARC coatings are formulated to resist penetration and damage by the harsh chemicals used to decontaminate equipment returning from combat operations. As a result, these highly...
Read More »PFOA-free Water/Oil Repellent enhances textiles, nonwovens.
AsahiGuard AG-E550D, free of perfluorooctanoic acid (PFOA) at or above detection limits,Â- offers safe and effective alternative to C8-based products. When formulated into nonwoven textiles and textile finishes for outdoor and work clothing, fluorinated finishing agent provides water and oil repellency and stain resistance – even after multiple wash cycles....
Read More »Non-Explosive Cracking Agent aids concrete demolition.
Using Cracker, standard demolition can be carried out accurately without need for special equipment or preconditions. Product is virtually noiseless andÂ- free from vibration, as well as ecologically friendly. Supplied in powder form and sealed in vacuum packed heavy-duty plastic bags, Cracker is mixed with water and poured into spaced, pre-drilled vertical holes. After...
Read More »Air Products to Feature Epoxy Curing Agents at ECS 2013
LEHIGH VALLEY, Pa.- Air Products (NYSE: APD) will feature a number of waterborne and solvent-free epoxy curing agents as well as its new isocyanate curing agents, or polycarbamide technology, for use in a variety of coatings applications at next week's European Coatings Show (ECS) in Nuremberg, Germany. Air Products' Amicure® IC-321 curative is an amine curing agent specifically engineered...
Read More »
Nordson ASYMTEK Demonstrates NexJet Jetting System with One-Piece Genius Jet Cartridge at IPC APEX Booth 3115
System improves precision, speed, throughput,Â- and reduces cost of ownership Carlsbad, CA, USA - Nordson ASYMTEK, a leader in fluid dispensing, coating, and jetting technologies, will demonstrate its new, patent-pending, NexJet™ jetting system, with the one-piece Genius™ Jet Cartridge, at IPC APEX 2013 booth #3115. The Genius Jet Cartridge is the only system part that...
Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.
Read More »
