Precision Rotary Tables
Positioners

Precision Rotary Tables

Rotary Tables are used in positioning for assembly, testing and production. The manual and motorized tables and turntables are available. Worm-gear drives come in three ratios: 18: 1, 36:1 and 72:1, The knob is engraved in 0.1 degree increments; it can be replaced with a stepper motor if desired. Table size is 2.37 (6.2 cm) high, 5.27" (13.7 cm) diameter and 8.28" (210 mm) long with a 1.57"(39...

Read More »
Pigs

Ultrasonic Smart Pigs suit small-diameter pipelines.

Untethered ultrasonic smart pigs, for pipelines and fired heater tubes, inspect straight lines and navigate short radius bends. Operating in several liquid media, units sample 360° of up to 12 miles of tube wall at 2,400 samples/sec, travel velocity of 1-2 fps, and travel measurement resolution of ¼ in. Their transducer offers 3D color-coded representations of wall thickness and units can...

Read More »
Versatile, High-Performance, Cost-Effective Linear Motor Stages for Precision Motion
Positioners

Versatile, High-Performance, Cost-Effective Linear Motor Stages for Precision Motion

Ultra-smooth, precise motion from the direct-drive linear motor Zero backlash, no windup, and outstanding responsiveness Long-life linear motion guide bearing system Four different series with 38 models in travels from 100 mm to 1.5 m meet the needs of virtually any application Wide-body versions for heavy or offset loads Aerotech's PRO LM series of high performance, cost-effective and versatile...

Read More »
Mechanical Lift Tables feature butcher block top.
Lifts

Mechanical Lift Tables feature butcher block top.

Available with capacities from 250-1,000 lb, Mechanical Scissor Lift Tables offer deck sizes from 24 x 36 in. to 36 x 96 in. and raised height up to 87 in. when installed on wheels. Wooden butcher block top is fastened to metal frame to prevent warping and provide ample support for load. Lifting operation is accomplished using acme screw-type lift or cable winch-type lift with worm gear drive....

Read More »
Plugs and Stoppers

Six ONS Innovation Awards Nominations for Aker Solutions

19 August 2010 - The ONS Innovation Awards is one of the oil industry's most prestigious accolades. This year, six of Aker Solutions' technologies have been nominated by the ONS (Offshore Northern Seas) jury. "We provide solutions for the future with these six nominated technologies", says chief technology officer in Aker Solutions, Åsmund Bøe. "All of our innovation ability, technical...

Read More »
SMD Pick-and-Place System holds 240 components simultaneously.
Assembly Machinery

SMD Pick-and-Place System holds 240 components simultaneously.

Cobra SMD Placer features linear motors, high-speed bus and signal processing system, and 8-axis placement head in which each axis can place components from 01005 to 100 x 150 mm. Unit offers placement area of 23.6 x 23.6 in. and has placement speed rated up to 20,000 cph. Optimized for touchscreen input systems, ePlace graphical interface verifies all operator entries and, if necessary, proposes...

Read More »
Chucks and Collets

Two Tier Quality Assurance for Toolmex Products

Extending Toolmex TMX Workholding and Tooling Product Lines, Customers Increase Productivity with Tested Products NATICK, Massachusetts - June 17, 2010 - Toolmex Corporation, a leading workholding and tooling product designer and supplier, announced today that they are extending their current workholding line of manual and power chucks, cylinders, v-flanges and vises. The Toolmex Product...

Read More »
Coolant Filtering System cleans large coolant sumps.
Fluid Filters

Coolant Filtering System cleans large coolant sumps.

Model 6198-110 Chip Trapper(TM) removes solids such as chips, swarf, and shavings out of used coolants and other liquids. Compressed air-powered unit vacuums dirty coolant or liquid into included 110 gal drum, trapping all solids in reusable filter bag. With one turn of flow valve, clean liquid pumps back out. There are no motors or impellers, and safe operation is ensured via built-in...

Read More »
Federal Signal Introduces ATEX/IEC Product Line
Alarms

Federal Signal Introduces ATEX/IEC Product Line

Status indicator, dual-function beacon and call point product lines further strengthen critical communications coverage for the global marketplace University Park, IL: Federal Signal, a leader in providing critical communications products and systems around the world, has introduced three new product lines specifically designed and engineered to meet international safety standards. The new...

Read More »
Static Dissipative Cleanroom Wipes are made from black monofilament polyester.
Cleanroom Equipment

Static Dissipative Cleanroom Wipes are made from black monofilament polyester.

Suited for cleanroom and equipment maintenance or any applications were lint can be detrimental, Poly-Onyx(TM) ESD Wipes are made from black monofilament polyester no-run knit for strength, absorbency, and chemical compatibility. Black color makes wipes suited for inspecting translucent or light-colored soils and dusts as well as makeup on cleanroom workers. Static dissipative fibers, also woven...

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers