Micro Rotary Stage provides load capacity of 6 kg.
Positioners

Micro Rotary Stage provides load capacity of 6 kg.

Featuring anodized aluminum body with pre-loaded ball bearings, Model RTHM-153 rotates optical components and small tooling in confined spaces, such as laser cavities and disk texturing machines. Precision ground worm gear produces consistent driving torque to rotor and eliminates variations in motor current. Equipped with reference home sensor, stage features angular resolution up to 0.2...

Read More »
JNJ Industries' GlobalTech® AquaSonic AQP Solder Paste & Flux Remover Certified as Clean Air Solvent by SCAQMD
Cleaning Compounds and Chemicals

JNJ Industries' GlobalTech® AquaSonic AQP Solder Paste & Flux Remover Certified as Clean Air Solvent by SCAQMD

Franklin, Massachusetts, USA - JNJ Industries' GlobalTech® AquaSonic AQP Solder Paste & Flux Remover has been certified by the South Coast Air Quality Management District (SCAQMD) as a Clean Air Solvent, meeting their stringent requirements of 25 grams per liter or less of VOC. The re-certification is in effect for 5 years, until August, 2015.

Read More »
ANT95-R and ANT130-R Nanopositioning Rotary Stages
Positioners

ANT95-R and ANT130-R Nanopositioning Rotary Stages

ANT95-R and ANT130-R Nanopositioning Rotary Stages Offer Laboratory Performance on a 24/7 Production Floor Sub-arc-second performance with 20°, 180°, or 360° continuous travel 0.01 arc-second resolution 0.005 arc-second in-position stability Maximum speed is 200 rpm and maximum acceleration is 400 rad/s2 Outstanding error-motion specifications Multi-axis configurations High...

Read More »
Precision Rotary Tables
Positioners

Precision Rotary Tables

Rotary Tables are used in positioning for assembly, testing and production. The manual and motorized tables and turntables are available. Worm-gear drives come in three ratios: 18: 1, 36:1 and 72:1, The knob is engraved in 0.1 degree increments; it can be replaced with a stepper motor if desired. Table size is 2.37 (6.2 cm) high, 5.27" (13.7 cm) diameter and 8.28" (210 mm) long with a 1.57"(39...

Read More »
Pigs

Ultrasonic Smart Pigs suit small-diameter pipelines.

Untethered ultrasonic smart pigs, for pipelines and fired heater tubes, inspect straight lines and navigate short radius bends. Operating in several liquid media, units sample 360° of up to 12 miles of tube wall at 2,400 samples/sec, travel velocity of 1-2 fps, and travel measurement resolution of ¼ in. Their transducer offers 3D color-coded representations of wall thickness and units can...

Read More »
Versatile, High-Performance, Cost-Effective Linear Motor Stages for Precision Motion
Positioners

Versatile, High-Performance, Cost-Effective Linear Motor Stages for Precision Motion

Ultra-smooth, precise motion from the direct-drive linear motor Zero backlash, no windup, and outstanding responsiveness Long-life linear motion guide bearing system Four different series with 38 models in travels from 100 mm to 1.5 m meet the needs of virtually any application Wide-body versions for heavy or offset loads Aerotech's PRO LM series of high performance, cost-effective and versatile...

Read More »
Mechanical Lift Tables feature butcher block top.
Lifts

Mechanical Lift Tables feature butcher block top.

Available with capacities from 250-1,000 lb, Mechanical Scissor Lift Tables offer deck sizes from 24 x 36 in. to 36 x 96 in. and raised height up to 87 in. when installed on wheels. Wooden butcher block top is fastened to metal frame to prevent warping and provide ample support for load. Lifting operation is accomplished using acme screw-type lift or cable winch-type lift with worm gear drive....

Read More »
Plugs and Stoppers

Six ONS Innovation Awards Nominations for Aker Solutions

19 August 2010 - The ONS Innovation Awards is one of the oil industry's most prestigious accolades. This year, six of Aker Solutions' technologies have been nominated by the ONS (Offshore Northern Seas) jury. "We provide solutions for the future with these six nominated technologies", says chief technology officer in Aker Solutions, Åsmund Bøe. "All of our innovation ability, technical...

Read More »
SMD Pick-and-Place System holds 240 components simultaneously.
Assembly Machinery

SMD Pick-and-Place System holds 240 components simultaneously.

Cobra SMD Placer features linear motors, high-speed bus and signal processing system, and 8-axis placement head in which each axis can place components from 01005 to 100 x 150 mm. Unit offers placement area of 23.6 x 23.6 in. and has placement speed rated up to 20,000 cph. Optimized for touchscreen input systems, ePlace graphical interface verifies all operator entries and, if necessary, proposes...

Read More »
Chucks and Collets

Two Tier Quality Assurance for Toolmex Products

Extending Toolmex TMX Workholding and Tooling Product Lines, Customers Increase Productivity with Tested Products NATICK, Massachusetts - June 17, 2010 - Toolmex Corporation, a leading workholding and tooling product designer and supplier, announced today that they are extending their current workholding line of manual and power chucks, cylinders, v-flanges and vises. The Toolmex Product...

Read More »

All Topics