Voice Coil Positioning Stage supports oscillatory applications.
Actuators

Voice Coil Positioning Stage supports oscillatory applications.

Used for high force, oscillatory applications requiring sinusoidal motion, Part No. VCS12-1000-LB-C consists of open loop system driven by NCC moving coil type linear actuator and guided by 2 ceramic coated shafts sliding within 2 precision linear bushings. Each voice coil has 1.2 in. stroke and generates 100 lb continuous force (300 lb peak). Solution can be supplied with springs so that voice...

Read More »
Gas Liquid Separators

Linde North America to Showcase Technology That Can Capture CO2 from Power Plants, Oil Refineries and Industrial Processes

Murray Hill & New Providence, New Jersey, U.S. - Linde North America will showcase its portfolio of carbon capture technology and experience at the 11th Annual Conference on Carbon Capture Utilization & Sequestration to be held at the David L. Lawrence Covention Center in Pittsburgh, Pennsylvania, April 30-May 3, 2012. The emergence of carbon capture, utilization and sequestration (CCUS) to...

Read More »
XYZ Nano-Positioning Stage for 3D Laser Lithography System
Prototyping Systems

XYZ Nano-Positioning Stage for 3D Laser Lithography System

Auburn, MA - Piezo nano-positioning systems specialist PI (Physik Instrumente) provides a 3-axis nano-positioning stage that is employed in a novel laser lithography system by Nanoscribe GmbH. The lithography system can produce complex 3-dimensional structures, fully automatic and repeatable with a precision and flexibility previously unavailable. Sub-micron structures with sizes of up to 1 mm...

Read More »
New Toneable Duct Rodder System Accurately Locates Duct Rodder Position or Underground Duct Blockages Without Invasive Digging or Trenching
Electric Wire, Cable and Cable Assemblies

New Toneable Duct Rodder System Accurately Locates Duct Rodder Position or Underground Duct Blockages Without Invasive Digging or Trenching

Trevose, PA - General Machine Products Company, Inc. (GMP), Trevose, PA, is pleased to introduce the Toneable Duct Rodder System to its complete line of underground cable placement tools and equipment. The Toneable Duct Rodder System eliminates the need for invasive digging or trenching to find, follow or map underground duct routes saving time and cost. The components of the system include a...

Read More »
A Guide to Quality Control of the SMT Process
Sponsored

A Guide to Quality Control of the SMT Process

The printed circuit board (PCB) manufacturing process begins with cutting-edge equipment capable of accurately picking and placing up to 40,000 components per hour. This innovative equipment keeps error rates extremely low, and those defects that do occur are quickly caught by sensitive laser and optical inspection equipment.

Read More »
Oil and Gas Field Equipment

Whether Onshore or Offshore

Sauer compressors are used in a variety of applications within the oil and gas sector. Designed for 24/7 operation, their robust construction allows them to be used (virtually) anywhere and under extremely difficult environmental conditions, for example, when exposed to salt-water, heat, or cold Sauer compressors easily satisfy the criteria of nearly all classification societies such as ABS, DN,...

Read More »
Sauer Compressors - Offshore - Seismic Applications
Air / Gas Compressors

Sauer Compressors - Offshore - Seismic Applications

Industrial oil and gas consumption is growing throughout the world. This means that new technologies and deposits must constantly be found if this increased demand is to be met. The fact that Sauer Compressors are very much at home on ships in general makes them ideal for use onboard exploration vessels which use air guns to survey the seabed around the world with a view to finding and exploiting...

Read More »
Linear Motion Track System carries maximum of 265 lb.

Linear Motion Track System carries maximum of 265 lb.

Comprised of aluminum tracks and re-circulating ball carriages, Model 115RC is suited for projects that require defined length of travel. Corrosion-resistant aluminum track, available in 47 and 94 in. lengths, may be cut to required length and may be side, flat, or vertically mounted. Available in stainless steel or grease-free polymer, carriages provide means for movement and positioning in...

Read More »
Steering Correction System controls laser beam positioning.
Positioners

Steering Correction System controls laser beam positioning.

Providing precision control of laser pointing and position drift, GuideStar(TM) II includes 2 independent Picomotor(TM)-actuated mirror mounts for manual and active 4-axis control with passive stability. Two miniature CMOS cameras offer position sensing and continuous tracking of laser beam positions and profiles, while control algorithm ensures correct alignment of beam in both X and Y, and...

Read More »
Positioners

Linear Stages integrate stepper motor and controller.

With travel lengths up to 2.1 m, max speed of 2.0 m/s, and 10 Â-µm repeatability, A-BLQ-E Series Belt-Driven Linear Stages are suited for rapid positioning over large distances. Built-in rotary encoder allows closed-loop operation with slip/stall recovery features. Requiring standard 48 V power supply for operation, stand-alone stages connect to RS-232 port of any computer and can be...

Read More »
Mahr Federal to Feature MarSurf® M 400 Skidless Surface Gage at Mfg 4 Manufacturing for the Future
Gages

Mahr Federal to Feature MarSurf® M 400 Skidless Surface Gage at Mfg 4 Manufacturing for the Future

PROVIDENCE, RI - Mahr Federal will be featuring the addition of an economical and powerful new skidless surface evaluation system to its MarSurf® line of mobile surface metrology systems at Mfg 4 Manufacturing for the Future, May 8-10, 2012, at the Connecticut Convention Center, Hartford, CT. Mahr Federal will occupy booth #1221. The new MarSurf M 400 features proprietary motorized probe...

Read More »
Locon Sensors Withstand Extreme Temperatures
Sponsored

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers