Wellheads

GE Signs $84 Million Agreement with PEMEX for Deepwater Exploration Projects in the Gulf of Mexico

CIUDAD DEL CARMEN, CAMPECHE — GE Oil & Gas (NYSE: GE) has signed an $84 million agreement with PEMEX Exploration and Production to supply and to install subsea wellheads for PEMEX's deepwater and ultra-deepwater drilling projects in the Gulf of Mexico. This marks GE's largest agreement with PEMEX for the supply of subsea high capacity wellheads. The Gulf of Mexico is a strategic zone for the...

Read More »
Engineering Plastics Perform Well in Fracking Operations Used in Oil and Gas Exploration
Oil and Gas Field Equipment

Engineering Plastics Perform Well in Fracking Operations Used in Oil and Gas Exploration

Ensinger Engineering Plastics offer characteristics essential for successful fracking operations. During the fracking process, it is necessary to isolate sections of the well. This is accomplished by using specialized equipment known as packers and frac sleeves. Once this equipment has been sent to the proper depth, fracturing begins by sending precisely sized frac balls down the well. Each ball...

Read More »
Miniature Nanopositioning Stages utilize piezo-walk motor.
Positioners

Miniature Nanopositioning Stages utilize piezo-walk motor.

Measuring less than 1 in. wide, LPS-24 Series provides 15 mm travel and isÂ- equipped with piezo-walk motor which features 1 lb of thrust and several operating modes: long distance, high-dynamics nanostepping with less than 1 nm resolution, and constant velocity mode. Self-clamping design delivers long-term power-off position-hold capabilities without need for brake. PIone closed-loop,...

Read More »
TURCK to Feature Cabling Solutions at Offshore Technology Conference
Electric Wire, Cable and Cable Assemblies

TURCK to Feature Cabling Solutions at Offshore Technology Conference

Minneapolis, MNÂ- – TURCK announces it will be exhibiting its cabling products and solutions at the Offshore Technology Conference (OTC), May 6-9 in Houston, Texas. Attracting more than 80,000 attendees and 2,500 exhibitors, OTC is the world's foremost event for the development of offshore resources in the fields of drilling, exploration, production and environmental protection. As a...

Read More »
A Guide to Quality Control of the SMT Process
Sponsored

A Guide to Quality Control of the SMT Process

The printed circuit board (PCB) manufacturing process begins with cutting-edge equipment capable of accurately picking and placing up to 40,000 components per hour. This innovative equipment keeps error rates extremely low, and those defects that do occur are quickly caught by sensitive laser and optical inspection equipment.

Read More »
Three-Axis Spindle Stage allows for accurate error analysis.
Positioners

Three-Axis Spindle Stage allows for accurate error analysis.

Designed for use with Spindle Error Analyzer (SEA), 3-axis stage includes top plate with mounting holes mating to SEA probe holders. Spindles can be located in test stand, with probes located ±50 Â-µm from master ball. Included in SEA system are capacitive displacement sensors, masterball targets with less than 100 nm roundness error, temperature sensors, and analysis software. It lets...

Read More »
Mahr Federal to Feature New Micro-Dimensionair® II at MD&M East 2013
Gages

Mahr Federal to Feature New Micro-Dimensionair® II at MD&M East 2013

PROVIDENCE, RI – Mahr Federal will be featuring the new Micro-Dimensionair® II, the next generation of its well-established Micro-Dimensionair line of portable air gages, at MDM East, June 18-20, 2013, Pennsylvania Convention Center, Philadelphia, PA, Booth #2533. The new Micro-Dimensionair II incorporates the enhanced Micro-Maxum® II Digital Indicator and an interchangeable handle...

Read More »
Heat-Shrinkable Probe Covers feature .010 in. thick wall.
Miscellaneous Seals

Heat-Shrinkable Probe Covers feature .010 in. thick wall.

Tef-Cap Probe Covers slip over standard size probes and shrink when exposed to heat source of approximately 300°F. Encapsulating probe in 2-3 min, heat-shrinkable, FEP and PFA probe covers protect thermocouples, RTD's, and sensors as well as glass thermometers and glass thermo-wells. Covers also add round, conforming, pinhole-free seal to fluoropolymer tubing. Both covers are chemically...

Read More »
British Antarctic Survey Selects Maxtena's Antenna for Science Spears
Antennas

British Antarctic Survey Selects Maxtena's Antenna for Science Spears

Maxtena has been selected as the antenna provider to British Antarctic Survey (BAS), one of the world's leading environmental research centers with responsibility for the UK's national scientific activities in Antarctica. BAS scientists have developed an airdropped spear to put vital reporting instruments in parts of Antarctica only accessible by plane. Twenty-five of the spears have been...

Read More »
Maintenance and Repair Services

GE to Supply Statoil Petroleum with Advanced Aeroderivative Gas Turbine Technology for Aasta Hansteen Field in Norway

• Aasta Hansteen Marks GE's First Project Award under New Frame Agreement for Supply of Turbomachinery Equipment and Â- Ã‚ Services for Statoil's Offshore and Onshore Projects • GE's Scope of Supply Includes the First LM6000 Mechanical Drive Turbocompressor Train for Offshore Applications • GE's SeaSmart™ Offshore Package Solution for Power Generation Provides Reduced Weight...

Read More »
Mars Rover Collects First Drill Sample
Sensors / Detectors / Transducers

Mars Rover Collects First Drill Sample

Irvine, CALIF.Â- – FUTEK Advanced Sensor Technology, Inc. is beyond ecstatic with the latest news regarding the Mars Rover Curiosity. The success of this first ever inter-planetary sample collection not only made history for NASA and the U.S. space program, but also for FUTEK as two of their test and measurement products were integral during this drilling mission. Six years ago, FUTEK...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers