New Mining, Oil Drilling, Refining Products & Equipment Products

Motorized Rotation Stage provides 360-

General-purpose 8MR180 has 2 in. aperture in middle, and coarse angular position is indicated on 360Ã-

Gauging Sensor Head suits limited work envelopes.

Based on laser triangulation, SelcomÃ-® SLS 2401 offers stand-off distance of 1.97 or 3.15 in., depending on model, measuring range of 0.8 or 3.15 in., and spot size of 0.002 or 0.004 in. Class IIIb and optional Class II and Class 3R PSD-based unit features microprocessor-based Fast Light Control Circuit, which reacts in less than 8 Ã-µs for error-free measurements up to 16,000 times/sec....

Rubber/Ceramic Liners handle highly abrasive applications.

Available in staggered- and aligned-ceramic designs, Dur-X-LineÃ-® of Rubber/Ceramic Liners help extend chute life while minimizing liner replacement, maintenance, and downtime in aggregate and mining applications. Products feature alumina ceramic cylinders within liner and rubber backing that absorbs impact and prevents ceramic from shattering. Liners have solid steel backing and can be...

Panel Meter offers compact package.

Housed in 1/32 DIN package, 3Ã-½-digit LCI132 Panel Meter Indicator features IP 65/NEMA 4X front panel and can be programmed to scale that is needed. Inputs are available for 0-10 V and 4-20 mA, as well as ac volts, ac amps, dc volts, and dc amps. Optional 4/48 Vac operation is available.

Ergonomics Is Good Economics

While you don't need an MD to know that ergonomic designs are good for physical health, you probably didn't realize that these designs can actually be good for your economic health too.

LED Indicators allow lamp changes after installation.

Series SSF-LXH4RA right-angle LED indicators mount to printed circuit board without additional spacers or mounting hardware. Construction enables any 2-leaded LED to be installed before or after sockets have been soldered to board, which also allows users to change color or brightness. Products are available in 9 standard units in red, green, yellow, bi-color red/green, and blinking red versions....

Controllers/Indicators suit LVDT-based applications.

Series DMC Dual Channel Controllers and Series DMI Single Channel Indicators incorporate internal signal conditioning to provide proper voltage for operating LVDTs and scalable analog output to feed external instrumentation. DMC units feature 6-digit, scrolling alphanumeric display that actively prompts user through set-up, while DMI Indicators provide 5-digit LED display that can be calibrated...

Linear Stage uses direct-coupled brushless motor.

Suited for space-constrained applications, ATS125 incorporates brushless rotary motor and hard-coated aluminum cover. Vertical orientation of side seals deflects debris away from stage. Square-wave encoder output, with net resolution of 1 micron for 10 mm ball screw and 0.5 micron for 5 mm ball screw, is standard. Available with standard- and precision-grade ball-screw options, product offers...

Linear Stages integrate stepper motor and screw.

Mini-RailÃ-®MS self-lubricating, motorized, screw-driven miniature linear stages provide smooth and quiet linear motion control. Units require no sealing, emit no particulates, are corrosion-resistant, and tolerate high temperature extremes. Available with 3 different leads, units are suited for semiconductor processing, clean rooms, scanning and input devices, packaging machinery, medical...

Position Monitoring System indicates tool status.

OTT/JAKOB employs electronic analog sensor, which detects position and allows user to monitor drawbar for performance and wear. Electronic unit, attached to machine controller, transmits data, while system indicates whether tools are clamped, unclamped, or not present. Tool head accuracy and longevity are increased by monitoring cycles and hours, which indicate whether tools are properly held....

Motors and Stages are suited for miniaturized products.

Squiggle(TM) ultrasonic linear motor uses piezoelectric ceramic tube that supports 2 threaded nuts which hold threaded shaft. Tube is electrically driven at ultrasonic frequency. Measuring less than 10 mm in dia and 20 mm in length, motor exhibits up to 5 N force with resolution of better than 100 nm. Speed Range is 1 Ã-µm/sec to 5 mm/sec, and range of motion is 50 mm or more. Squiggle stage,...

ISO-Certified J&D Tube Benders Delivers Rapid Tubeline Fabrication Services

J&D Tube Benders' laser cutting and machining services provide accurate and complex features on tubes of all shapes and sizes. Check out the video to learn more!