Linear Stepper Stages feature 1 micron resolution.
Positioners

Linear Stepper Stages feature 1 micron resolution.

Capable of speeds to 118 ips and acceleration up to 5 G's, closed loop linear steppers with integral linear encoder feature repeatability to .0004 in./ft and accuracy to .001 in./ft. Stages are available in travel lengths to 144 in. and forces of 6, 10, and 20 lb. Cable carrier ensures cables protection and provides cycle 100,000,000 plus cycle counts.

Read More »
Precision Slide Tables feature sealed linear bearings.
Miscellaneous Tables

Precision Slide Tables feature sealed linear bearings.

Pre-engineered to carry heavy loads under severe, continuous-duty operations, Precision Slide Table Systems are available with Roller Bearing Pillow Blocks or Precision Plus Linear Ball Bearings. Free rolling, self-aligning pillow blocks ride on case hardened and ground 60 Plus® linear shafting. They feature aluminum pillow block body with black oxide finish on exposed surfaces to resist...

Read More »
New Horse Power for Godiva Fire Pumps with DC Drives from Sprint Electric
Motor Controllers and Drives

New Horse Power for Godiva Fire Pumps with DC Drives from Sprint Electric

Arundel, England, September 2006--Godiva fire pumps are being used by fire fighters all over the world. The fire pumps for engine and static mounting are manufactured by Hale Products Europe Ltd. in England, the European branch of US fire pump manufacturer Hale Products Inc. Hale Products Europe were recently experiencing reliability problems with their three production test rigs. The test rigs...

Read More »
R&M Energy Systems Features Drilling and Artificial Lift Products at the 2006 Permian Basin International Oil Show
Lifts

R&M Energy Systems Features Drilling and Artificial Lift Products at the 2006 Permian Basin International Oil Show

Willis, Texas - R&M Energy Systems is presenting its complete line of products for the oil and gas exploration, production and pipeline industry at the 2006 Permian Basin International Oil Show, October 17-19. All R&M Energy Systems' products are backed by extensive oilfield applications experience, advanced engineering and design, and unrivaled manufacturing quality. The Company is featuring its...

Read More »
Tooling System is designed for thick turret punch presses.
Presses

Tooling System is designed for thick turret punch presses.

MXC(TM) tooling system consists of punches, strippers, and Slug Free® dies for -½ in. A, 1¼ in. B, 2 in. C, 3½ in. D, and 4¼ in. E thick turret stations. Manufactured of DuraSteel(TM), MXC Punches feature minute back taper with near polished punch flanks to reduce friction and heat build-up during punching cycle. MXC Strippers, manufactured of 4150 tool steel, are designed with round...

Read More »
Translation Stage measures just 9.0 x 6.5 x 2.4 mm.
Positioners

Translation Stage measures just 9.0 x 6.5 x 2.4 mm.

With stroke of 3.2 mm and velocities of up to 80 mm/sec, Model P-652 piezoelectric, linear-motor driven, translation stage offers sub-micron resolution and holding force of 20 g. Backlash-free unit contains ultrasonic piezoelectric resonator and 2 lateral sliders pressed against it by spring that doubles as moving carriage. Operating voltage of driver electronics is 2.8-3.2 V, operating current...

Read More »
Positioning Stages are available with several motor options.
Positioners

Positioning Stages are available with several motor options.

Offered in stroke lengths from 4.8-107.2 in., narrow-profile NP2 Series consists of 16 motorized positioning stages that can reach speeds to 24 ips and precision guide rail system. They can be supplied with no motor, 150 oz-in. stepper motor, or 120 W servo motor; stages without steppers or servos can readily accept NEMA 23 frame motors. Available precision ball screw drive system is offered with...

Read More »
Motorized Positioning Stages have enclosed motor assembly.
Positioners

Motorized Positioning Stages have enclosed motor assembly.

Featuring single rigid aluminum extrusion profile, HD2 Series Slides are available with stroke lengths from 4.8-107.2 in. and either 150 oz-in. stepper motor, 120 W servo motor, or no motor at all. Each unit has 4 precision ground, 12 mm dia steel rails with 2 or 4 single-piece steel bearing blocks, all hardened to HRC 62 ±2. They come with 16 mm dia ball screw drives with 2.5, 5, 10, and 20 mm...

Read More »
Compensation Unit suits pick-and-place applications.
Robots

Compensation Unit suits pick-and-place applications.

With compensation ranges of ±12 mm in X- and Y-direction and ±14 mm in Z-direction, Model AGE-S guarantees compensation beyond positioning accuracy of robot for medium and heavy load applications. It resists bending moments and complies to workpiece positions, minimizing assembly and unloading forces, and protecting robot and assembly line. With payloads from 12-220 lb, unit may be fixed...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics