Position Tracking System offers 0.8 mm resolution.
Trackers

Position Tracking System offers 0.8 mm resolution.

Able to be horizontally or vertically curved, WCS2A/WCS3A PosiTrack(TM) consists of U-shaped read head, fiber-laminate or stainless steel code rail and support hardware, as well as network and control interfaces. Internal microprocessor translates 48 sender/receiver LED array status into 19-bit code, providing fraction-of-a-millimeter positional resolution over travel distances to 1,070 ft....

Read More »
Handling Equipment

Linear Transfer System speeds material movement.

Utilizing linear servo drive technology, Linear Transfer Vehicle® provides acceleration and deceleration rates up to 2 Gs with positioning accuracy of 0.010 in. Power module can be sized to accommodate various payloads, aisle lengths, or tooling. On-board wireless control system continuously controls position and speed throughout travel. Applications include warehousing and shipping...

Read More »
Positioners

GNSS Positioning Technology is forward-compatible.

Software-based technology supports Global Navigation Satellite System (GNSS) to optimize flexibility in end-user positioning products such as Resolution-T(TM) timing receiver and Mini-T(TM) Thunderbolt(TM) GPS disciplined clock. While GNSS technology accommodates signals broadcast by GPS as well as Galileo and GLONASS satellite systems, satellite receiver functionality uses general-purpose DSP in...

Read More »
Lift Tables

Air Lift Tables offer capacities from 1,000-16,000 lb.

Providing solution to many handling and positioning problems, Air Lift Tables offer variable platform sizes from 24 x 48 in. to 72 x 144 in. Lift travel is 24 in. for single lifts and 48 in. for double high lifts. Models are available with non-powered turntables to facilitate pallet loading and unloading. Additionally, there are models equipped with 35° tilt tables to help facilitate...

Read More »
Lights

LED Beacons offer visual status indication.

Providing 360° status indication in red, amber, or green, 24 Vdc Conduit LED Beacons are suited for various safety devices such as interlock switches, light curtains, and mats. IP65-rated, UL and C-UL listed units allow visual monitoring of multiple hazardous access points, without having to manually check status of each device. They feature M20 threads and 4 in. leads for installation...

Read More »
Ultrasonic Positioning System controls up to 4 workstations.
Controls and Controllers

Ultrasonic Positioning System controls up to 4 workstations.

Consisting of ultrasonic emitters, receivers, and control interface, UOS-100 promotes error proofing efficiency in industrial assembly applications. It enables users to determine position of tool or object in 3D space without requiring mechanical systems such as articulating arms. Communicating via Ethernet, system enables complete operation from propagation time measurement to output of...

Read More »
Miniature Linear Stage is suited for IVD instrumentation.
Positioners

Miniature Linear Stage is suited for IVD instrumentation.

Incorporated into in-vitro diagnostic (IVD) instruments as fully integrated plug-and-play units, PICO linear stages enable controlled linear movement. Construction features extruded aluminum base, stainless steel cover, and axes designed for cross-table assembly. Along with integrated drive and guidance mechanisms, products are available in 60 and 80 mm sizes, with 5 standard stroke lengths for...

Read More »
Loop Powered Indicator is suited for local or remote use.
Indicators

Loop Powered Indicator is suited for local or remote use.

Series LPI accepts 4-20 mA input signal and displays associated process variable such as pressure, flow, temperature, level, or RH. Equipped with red, 4-digit LED for local or remote indication, instrument configuration can be modified via 3 push buttons. Users can program I/O scaling, engineering units, offset, resolution, and password protection. Linearizations that can be applied to display...

Read More »
Sleeves and Bushings offer concentricity without adjustment.
Adapter Sleeves

Sleeves and Bushings offer concentricity without adjustment.

Split square hole sleeve Series A 7C19 is suited for producing tooling such as milling cutters or boring bars without broaching equipment, while split square hole bushing Series A 7C18 fits any mating size collet or 3-jawed chuck. Sleeves are cold-rolled steel C1117 and range in length from ¾-5 in. Bushings are 4140 steel and hardened to Re 40-45. Broached square holes, which range from...

Read More »
Splines and Splined Bushings fit shafts from 11/32-3/4 in.
Splines

Splines and Splined Bushings fit shafts from 11/32-3/4 in.

Splines, offered as carbon steel C-12L14 Series A 1C25 or stainless 416 annealed A 1Y25 Series, permit sliding between mating members in axial direction. Shafts contain 16 external spline teeth, and stock lengths of splined shafts range from 1-6 ft. Splined bushings contain 16 internal teeth and are offered as carbon steel A 1C26 Series or stainless 416 annealed A1Y26 Series. Bushing ODs range...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers