Quadro Engineering Corp. Develops CIP Fine Grind F10 Mill

Quadro Engineering Corp. Develops CIP Fine Grind F10 Mill

Quadro's continuing efforts to innovate process technology in the field of fine grind size reduction are once again realized with the development of a Clean-In-Place F10 Fine Grind Mill. Quadro's F10 Fine Grind Mill has been succesfully implemented in Pharmaceutical, Biotech, Fine Chemical and Food industries where PSD targets range from 5 - 150-µm. The addition of a Clean-In-Place design...

Read More »
Sandvik Coromant Introduces Family of CoroMill® Tools for Grooving and Slitting

Sandvik Coromant Introduces Family of CoroMill® Tools for Grooving and Slitting

Fair Lawn, New Jersey, August 7, 2009 - Sandvik Coromant has announced a family of tools dedicated to productive grooving and slitting performance. This assortment of tools includes additions to the CoroMill® 329, CoroMill 331, CoroMill 327 and CoroMill 328 lines of products. The tools will be available in October 2009. The new CoroMill 329 cutter uses CoroCut® 2-edge inserts with a strong...

Read More »
Best-in-Class Face-Milling Performance with New M1200(TM) Milling Choices from WIDIA

Best-in-Class Face-Milling Performance with New M1200(TM) Milling Choices from WIDIA

(LATROBE, PA) - New additions to the M1200(TM) series of face-milling cutters and inserts from WIDIA, part of the company's Victory(TM) platform of advanced milling, turning, and holemaking tools, are providing superior results for manufacturers working in steels, stainless steels, high-strength steels, cast irons, and now even non-ferrous materials. In addition to the hugely successful M1200...

Read More »
Sandvik Coromant Introduces Variety of New Milling Solutions

Sandvik Coromant Introduces Variety of New Milling Solutions

Fair Lawn, New Jersey, July 27, 2009 - Sandvik Coromant has announced a variety of expansions to its milling product lines, including the introduction of new tool diameters and innovative insert grades and geometries. The new tools will be available in October 2009. The CoroMill® 490 system will now offer additional tool diameters ranging from 0.787 - 4.921 . Additionally, new insert geometries...

Read More »
Bridge Mills handle large parts with complex geometries.

Bridge Mills handle large parts with complex geometries.

Available in 6 models, DCM Series offers table sizes from 106 x 397 to 126 x 319 in. that support up to 150,000 lb. Machines utilize 50 hp spindle motor that turns CAT DIN, Mas, Big-plus, or HSK tools at speeds up to 10,000 rpm. Able to face mill stainless steel at rate of 35.7 ipm and cast iron at 44.3 ipm, machines include 40-station ATC and Fanuc 31i-A control. Bed and column are structured to...

Read More »
Toroid Inserts provide eight usable edges.

Toroid Inserts provide eight usable edges.

Featuring 45 degree lead angle, RHINO-CARB Toroid inserts suit face milling, profiling, helical interpolation and chamfering applications. They come in -½, 5/8 and -¾ in. IC, with either T-land or dished-face edge. T-land inserts offer reinforced cutting edge for steels, irons and hard milling, while dished-face units provide high-positive cutting edge for stainless steels, high-temperature...

Read More »

Modular Tooling System uses interchangeable carbide inserts.

Using 5 cutting head geometries in multiple sizes and tool lengths, Modular Insert Tooling offers 24 different cutting tool combinations. Cutter mounts are available in 3 lengths, while geometries are available for face milling, end milling, center-cutting endmilling, ball end milling, and toroidal end milling. Each mount uses Tormach Tooling System (TTS) geometry for quick tool offset...

Read More »

Red Bull Finds the Winning Formula with JETCAM

Red Bull Technology manufactures Formula 1 motor sport cars for Red Bull Racing. In 2008 the company decided to replace their existing flat bed knife cutter with two Zund knife cutters, one with a conveyor bed. They decided to evaluate CAM systems, investigating an upgrade to their existing CAM software as well as looking at alternatives. Said Andy Bosworth, Production Coordinator; We ran a...

Read More »
Definer® an Advanced Ultra- Sanitary Mill

Definer® an Advanced Ultra- Sanitary Mill

The Definer is a versatile, ultra-sanitary, mill with the processing capabilities of several mills in one. This unit easily reduces a variety of powders and agglomerates to a controlled output particle size. It is uniquely designed to meet the special demands of the pharmaceutical, food, dairy and chemical industries. The Definer is a fully enclosed, dust tight unit constructed entirely of...

Read More »
3D Desktop Milling Machine creates models from CAD data.

3D Desktop Milling Machine creates models from CAD data.

Building on Subtractive Rapid Prototyping technology, Model MDX-40A emulates actual manufacturing processes for prototypes that accurately reflect product's functionality and appearance. Base unit offers work area of 12 x 12 x 4.1 in., supports G-Code programming, and comes packaged with SRP Player CAM software. Bundled ClickMill software enables direct control of MDX-40A for surfacing, hole...

Read More »

All Topics