Milling Machines

FEMCO Model 'BMC-110R2' Horizontal Boring Mill

FEMCO Inc., specializing in high quality CNC machine tools, offers the highly productive CNC horizontal boring mill model BMC-110R2 for manufacturing large parts for a wide variety of industries. The BMC-110R2 features stress relieved Meehanite castings for all major components and utilizes induction hardened box ways on all three axes (X,Y,Z). The headstock, column, base and cross slides are all...

Read More »
Milling Machines

Composite Trimming Machine combines milling with ultrasonic trimming.

Manufactured in any size with any level of automation, FZ Combined Ultrasonic and Milling Composite Trimming Machine uses combination of processes to increase productivity and flexibility. Ultrasonic blades, up to 3 in. long, and rotational ultrasonic disks offer quick-change ability. Ultrasonic horns have frequencies and amplitudes automatically programmed and controlled by Siemens 840D. There...

Read More »
Milling Machines

Aluminum Milling Machine uses specialized head.

Manufactured to any size and level of automation, FZ Aluminum Milling Machine employs heavy-duty SPL milling head with integrated clutches to clamp axis positions for aluminum and rapid prototyping. Gearless and absolutely rigid torque motor drives C axis; compact, zero backlash Harmonic Drive drives B axis; and linear motor drives for X and Y axes minimize cycle times due to dynamic movements...

Read More »
GF AgieCharmilles Displaying Innovative, Complementary Technologies at IMTS 2010
Milling Machines

GF AgieCharmilles Displaying Innovative, Complementary Technologies at IMTS 2010

Lincolnshire, Illinois, June 14, 2010 - GF AgieCharmilles will be demonstrating a wide variety of complementary EDM, 5-axis milling and automation technologies in its primary booth, S-8754, at IMTS 2010. The company will also man a satellite booth, E-4440, which will focus on GF AgieCharmilles' standard-setting consumables and customer service departments. IMTS 2010 will take place on September...

Read More »
End Mills

End Mills provide low-torque, high-rate metal removal. .

Featuring 16-flute design, CYCLO CUT Max-Flute End Mills run at 2,037 rpm and 231 ipm to achieve removal rates up to 8 in.Â-³/min with 25 lb-ft torque and 9 hp. Shallow, radial widths of cut minimize heat transfer to cutting tool for roughing titanium, Inconel, and other high-temperature alloys. Used in conjunction with TrueMill® software, end mills maintain constant angle of...

Read More »
Drill and Tap Machine incorporates milling capability.
Milling Machines

Drill and Tap Machine incorporates milling capability.

Along with 508 x 406 x 394 mm work cube and 660 x 381 mm T-slot table, DT-1 features BT-30 taper spindle that spins to 15,000 rpm and allows tapping at speeds to 5,000 rpm. Standard 11.2 kW vector drive system provides 62 Nm peak torque for milling and boring, while 20-pocket, servo-driven tool changer swaps tools in 0.8 sec. Max cutting feedrate of 30.5 m/min, 61 m/min rapids, and 1 G...

Read More »
Delta Brands Designs and Delivers a ¾" X 96" Complete Temper Pass Cut-to-Length Line with Rotary Shear
Rolling Mills

Delta Brands Designs and Delivers a ¾" X 96" Complete Temper Pass Cut-to-Length Line with Rotary Shear

Delta Brands, Inc., (DBI) has delivered a 3/4 X 96" X 100,000 psi temper pass cut-to-length line with rotary shear to Fortacero S.A. de C.V. Headquartered in Monterrey, Mexico, Fortacero offers more than 800 products including plate, hot rolled sheet, and cold rolled sheet as well as structural and merchant bars. DBI designed and manufactured the temper pass cut-to-length line before delivering...

Read More »
Reduce Carpet to Clean Fiber with the Liberator Carpet Recycler from Schutte-Buffalo Hammermill
Material Processing Mills

Reduce Carpet to Clean Fiber with the Liberator Carpet Recycler from Schutte-Buffalo Hammermill

The Liberator Carpet Recycler from Schutte-Buffalo Hammermill is an industrial hammer mill designed to offer the highest degree of fiber-backing liberation from pre-shredded carpet. The Liberator is available in four standard sizes with screen areas ranging from 1680 to 5000 sq inches and throughput capacities up to 6,000 lbs/hr. Each model is constructed from heavy plate carbon steel and feature...

Read More »
Blown Film Surface Winder handles up to 60 in. dia rolls.
Rolling Mills

Blown Film Surface Winder handles up to 60 in. dia rolls.

Available in widths from 44-134 in., AC-driven SLC (SLiding Carriage) Series employs pneumatic cylinders for controlling winding force and is capable of winding rolls on 3 or 6 in. cores. Finished roll unloading system is independent from winding transfer cycle sequence, while roll carts and shaft handling are available to add automation. Other features include horizontal flat bed design, touch...

Read More »
Gantry Milling Machine incorporates linear motors.
Milling Machines

Gantry Milling Machine incorporates linear motors.

Featuring modular design, 5-axis ENDURA® 700Linear is suitable for machining 5 sides of parts made from plastic, composite materials, ureol, and aluminum, as well as for finishing cast and steel materials. Two-axis fork milling head with high frequency milling spindle is mounted on Z-axis lifting beam, which travels across gantry. Providing XYZ axis travels of 2,200 x 2,800 x 1,200 mm,...

Read More »

All Topics