Seco Tools to Showcase Wide Range of Tooling Solutions at AeroDef Manufacturing 2011
End Mills

Seco Tools to Showcase Wide Range of Tooling Solutions at AeroDef Manufacturing 2011

Troy, Michigan - Seco Tools will be demonstrating a comprehensive range of tooling solutions for aerospace and defense applications at AeroDef Manufacturing 2011. The company will exhibit its products in booth #1778 at the event, which takes place April 5 - 7 at the Anaheim Convention Center in Anaheim, California. In recent years, Seco Tools has concentrated heavily on developing tooling...

Read More »
Abrasive Cutter is optimized for sectioning applications.
Other Milling Cutters

Abrasive Cutter is optimized for sectioning applications.

AbrasiMatic® 300 abrasive cutter features 12 in. abrasive cut-off wheel, able to section up to 4.375 in. dia sample, and 5 hp motor that powers through materials such as steel, metal, ceramic, and concrete. Measuring 34 x 27 x 23 in., unit has 2 stainless steel T-slot vice table beds and side hood door that slides open as hood is raised during sample placement. Optional X-Bed adjusts with...

Read More »
Centrifugal Impact Mill woks in space-restricted areas.
Milling Machines

Centrifugal Impact Mill woks in space-restricted areas.

Employing direct drive system, 18 in. dia model CIM-18-SS provides coarse to fine (400 mesh) grinding of friable materials into controlled particle sizes as well as de-agglomerating and conditioning of dry solids. Setting infinitely variable rotor speed between several hundred rpm and 5,400 rpm provides flexibility to obtain desired tight particle size distribution. This 15 hp unit features 5...

Read More »
Gleason Introduces New Gear Production Solutions at CIMT 2011
Other Milling Cutters

Gleason Introduces New Gear Production Solutions at CIMT 2011

Rochester, New York - In its mission to be the industry's Total Gear Solutions Provider, Gleason will introduce a host of advanced new machines, tooling, and global customer support services at the China International Machine Tool show (CIMT) in Beijing China, April 11 - 16, 2011, covering a wide array of processes for the complete production and inspection of all types of bevel and cylindrical...

Read More »
Multiaxis Dental Milling Machine supports complex geometries.
Milling Machines

Multiaxis Dental Milling Machine supports complex geometries.

Offering 5-axis simultaneous machining and 5-station automatic tool changer with tool length sensor, DWX-50 is used for creating precision dental prosthetics - copings, crowns, full bridges, abutments - using zirconia, wax, and PMMA. Virtual panel facilitates desktop operation, while diagnostic notification system minimizes operator intervention via alerts for system errors or job completion....

Read More »
Milling Machines

Republic Engineered Products' Capacity Increases to Benefit Wide Range of SBQ Customers

Precision sizing mill in New York boosts bar, coil capacity; Additional focus placed on 9.75 X 7.50" bloom production in Canton. CANTON, Ohio -- Republic Engineered Products, Inc., the nation's leading producer of special bar quality (SBQ) steel, today announced the new $20 million precision sizing mill and related equipment at its rolling operation in Blasdell (Lackawanna), N.Y., is fully...

Read More »
High-Density End Mills promote efficient titanium roughing.
End Mills

High-Density End Mills promote efficient titanium roughing.

Featuring 16-flute design, CYCLO CUT Max-Flute end mills run at 2,037 rpm and 231 ipm to enable machining of internal structures in titanium, Inconel, and stainless steel components with removal rates up to 8 in.Â-³/min with 25 lb-ft torque and 9 hp. Shallow, radial widths of cut minimize heat transfer to cutting tool and maximizes surface speeds for roughing high-temperature alloys. Used in...

Read More »
GF AgieCharmilles Demonstrating A Variety of Technologies at AeroDef Manufacturing 2011
Milling Machines

GF AgieCharmilles Demonstrating A Variety of Technologies at AeroDef Manufacturing 2011

Lincolnshire, Illinois, - GF AgieCharmilles will be demonstrating Wire EDM and 5-axis milling technologies in its booth, #1258, at AeroDef Manufacturing 2011. The company will also be conducting a session focusing on how advances in EDM technology provide cost benefits to aerospace manufacturers. AeroDef Manufacturing 2011 will take place on April 5 - 7 at the Anaheim Convention Center in...

Read More »
Miscellaneous Controls

CNC Retrofit Brings Old Floor-Type Mill up to Modern Standards

Naperville, Illinois --- NUM's CNC technology has been used to bring the programming software and motion control system on an old floor-type horizontal boring mill originally manufactured by Gray up to state-of-the-art standards. The electrical upgrade was performed by the automation system integrator, MasterControls LLC Inc. (MCI), and was part of a complete mechanical rebuild of the mill by a...

Read More »
Milling Machines

Cimatron, BFW to Showcase Blade Machining Capabilities

CimatronE will Program Live Cutting of Blades for the Aerospace and Civil Engineering Industries at IMTEX India GIVAT SHMUEL, Israel -- Cimatron Limited (Nasdaq: CIMT), a leading provider of integrated CAD/CAM solutions for mold, tool and die makers as well as manufacturers of discrete parts, announced that CimatronE will power a range of different milling machines at the IMTEX trade show in...

Read More »

All Topics