Delta Steel Technologies Ships World's Widest, Thickest Temper Mill Cut-to-Length Line

IRVING, Texas- – Delta Steel Technologies announced it has shipped a 1 in. by 120 in. temper mill cut-to-length line with rotary shear to a U.S. service center. The equipment has been engineered to process the widest, thickest material ever produced on a temper mill cut-to-length line. Delta’s temper pass cut-to-length line offers the capability to produce ultra-flat, stay-flat high-strength...

Read More »
Envision Tech Installs New 5 Axis Milling Machine

Envision Tech Installs New 5 Axis Milling Machine

Envision Tech Installs a new 5 axis milling machine in January of 2013.-  This machine was purchased to manufacture aluminum impellers for a prominent OEM located in the midwest. TJ Baur, Vice President said Our customer could not find anybody willing or able to machine these impellers which drove them to find a qualified supplier in the upper east coast so we took the plunge and decided to...

Read More »
Solid Ceramic End Mill comes in 4- or 6-fluted versions.

Solid Ceramic End Mill comes in 4- or 6-fluted versions.

Beyond KYS40™-grade solid ceramic endmill is capable of roughing at cutting speeds up to 3,300 sfm and machining high-strength nickel-based alloys. Enlarged core design optimizes tool rigidity and minimizes deflection at high cutting speeds. Also, unit features 40-° helix angle for maximized shearing and chip evacuation. Product is available in 6-fluted version for face milling and profiling...

Read More »

Washington Mills: Milling to Fine and Sub-Micron Powders

Washington Mills, one of the world's largest producers of abrasives and fused mineral products, offers custom milling services for companies looking to grind small batches of materials to fine and sub-micron particle sizes. Washington Mills' pilot crushing and grading plant has the unique ability to mill small batches of material in both coarse and fine sizes. The finer sizes can be milled either...

Read More »
Seal Stuff In, Seal Stuff Out
Sponsored

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

Read More »
End Mills perform both roughing and finishing.

End Mills perform both roughing and finishing.

Available- in full range of inch and metric sizes, TOP-Cut™ Carbide End Mills feature variable helix angles that eliminate harmonic oscillation to minimize vibrations and optimize surface quality. Carbide substrate, combined with micro-geometry and high heat-resistant TiALN coating, ensures process safety and extended tool life, even in most diverse materials. For maximum efficiency, stable...

Read More »
DELUMPER® DC1082A Ultra-Compact Stainless Steel Crusher

DELUMPER® DC1082A Ultra-Compact Stainless Steel Crusher

The DELUMPER Model 1082A- is an ultra-compact, rugged,- multi-purpose unit that supports both chopping and milling action. It can be mounted anywhere without supports. Flanges provide easy connections to hoppers, process equipment, ducts and pipes. This Delumper is only five inches high and accepts lumps to full 4-1/2 x 6 inch input opening. The DC1082A, constructed entirely of stainless steel,...

Read More »

Reduce Cycle Time and Increase Accuracy with FANUC CNCs at Eastec

Booth #1244 May 14-16, West Springfield, MA Register for Eastec FANUC is known around the world for providing the most reliable, efficient and innovative CNC systems available - ensuring the very lowest Total Cost of Ownership. At Eastec, FANUC will be featuring CNC Series 30i/31i/32i-MODEL B that offers advanced machining with high accuracy, advancements in high-speed 5-axis capabilities with...

Read More »
Seco Tools to Highlight Advanced Tooling at AmeriMold 2013

Seco Tools to Highlight Advanced Tooling at AmeriMold 2013

TROY, Mich.– At AmeriMold 2013 in booth 135, Seco Tools will display its small-diameter Square 6™-04 shoulder milling cutter, High Feed 2 line of small diameter high-feed milling tools and its Double Octomill™ -05 face milling cutter for small machines. These recent tooling innovations significantly increase productivity and provide longer tool life for mold machining. Offered in diameters...

Read More »
GF AgieCharmilles to Show High-speed Milling and Cost-effective EDM at AmeriMold

GF AgieCharmilles to Show High-speed Milling and Cost-effective EDM at AmeriMold

LINCOLNSHIRE, Ill.– At this year’s AmeriMold show, taking place June 12- – 13 in Rosemont, Ill., GF AgieCharmilles will spotlight its MIKRON HSM 200U LP (linear performance) milling machine and its FORM 20 sinker EDM in booth 205. The MIKRON HSM 200U LP brings speed, efficiency, precision and true 5-axis simultaneous milling to the machining of small, highly complex components. Linear...

Read More »
Attrition Mill reduces particles down to 100 mesh.

Attrition Mill reduces particles down to 100 mesh.

Able to reduce friable chemicals and minerals, metal powders, wood flour, fertilizers, insecticides, and fibers, Model SK-24-MS produces particles from 10–100 mesh. This 24 in. dia mill is equipped with outer stationary milling disc and inner rotating milling disc. Precision of- machining and alignment of discs, together with constant spring pressure, maximize size uniformity of reduced...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics