Copy Mills handle close-tolerance machining.

Available in .315-1.250 in. diameters, Series R219.19 Copy Mills offer 2 insert geometries for semifinishing and finishing applications. They use single, precision-ground, ball-nose, replaceable insert, and can ramp into component or drill to shallow depth due to chisel center point. Single-blade unit is suitable for high-speed finishing and general copying of component feature. PVD-coated,...

Read More »
Ultra-Sanitary Mill is fully enclosed and dust-tight.

Ultra-Sanitary Mill is fully enclosed and dust-tight.

Featuring variable frequency controller and direct drive, stainless steel Definer-® measures 5 in. from inlet to outlet. Straight flow-through path eliminates hang up or accumulation in hoppers. De-agglomerating element with teeth and combs offers positive, once-thru anti-clog action. Fine milling element features high shear, rotor and screen which gently mills and conditions solids without...

Read More »
Copy Mills suit die and mold operations.

Copy Mills suit die and mold operations.

Designed for roughing, semi-finishing, and finishing operations, ValMILL(TM) V500 Copy Mills utilize RDMT (top form chipbreaker style) or RDMW round inserts. Products are available in 8 end mill sizes that range in diameter from .500-1.5 in. and in length from 4.07-7.44 in. Face mills, available in 5 sizes, are offered in diameters from 2-6 in. End mills use 2 inserts on each cutter, and face...

Read More »
Solid Carbide End Mills are offered in metric sizes.

Solid Carbide End Mills are offered in metric sizes.

Engineered for shrink-fit tool holding, 2-flute Metric End Mills feature positive rake angle that supports cutting in soft, medium, and hard materials for side milling and slotting. Cutter diameters range from 0.2-6.0 mm with shank diameter of 6 mm, which is held within -0.0025 to -0.005 mm. Cutter diameter tolerance is +0.000-0.014 mm on sizes up to 3.0 mm and +0.000-0.018 mm on larger sizes....

Read More »
End Mill provides roughing of die and mold steels.

End Mill provides roughing of die and mold steels.

HSC Feed is made with sub-micrograin substrate and AL2 plus PVD titanium aluminum nitride coating for wear resistance. With chip loads up to .031 in. per tooth and cutting speeds over 650 sfm, table feeds exceeding 500 ipm are possible. Solid-carbide endmill is suited for P20, H13, and S7 materials with hardness up to Rc 60, as well as carbon steel, alloy steel, cast iron, and stainless steel....

Read More »
Lab Mill works in continuous and circulation modes.

Lab Mill works in continuous and circulation modes.

Model DMQ-05 small media, -½-liter tank-sized mill utilizes Delta discs, eliminating shaft whip and mill vibration. Discs are indexed to provide directed and uniform media distribution throughout mill chamber. Ring screens can be adjusted to accommodate use of grinding media from 1 mm to as small as .3 mm. Large open screen area positioned at end of mill facilitates cleaning. If required, mill...

Read More »
Ball-Nose End Mills are designed for punishing cuts.

Ball-Nose End Mills are designed for punishing cuts.

Suited for rough milling and semi-finishing operations, ValMILL(TM) V440 Series ball-nose cutters have 2-flute design with one insert per flute and additional insert along tool shank that provides protection for larger cutter diameters. Multi-tooth end mills perform contouring, produce peripheral cuts, slot, drill, and mill die and mold cavities. Products, offered in 6 diameter sizes from .625-2...

Read More »
Colloid Mill is fully adjustable during operation.

Colloid Mill is fully adjustable during operation.

Z-Series Sanitary Colloid Mills produces ultra-fine particle size reduction and sub-micron dispersions and emulsions of varying viscosities. Milling head requires no special assembly tools, and rotor/stator gap adjustment, isolated from process area, is fully adjustable during operation. Featuring 316 stainless steel construction with Viton-® O-rings, mill is available with flow rates from...

Read More »
Plunge Milling Cutter is designed for metal removal.

Plunge Milling Cutter is designed for metal removal.

Designed to provide high metal removal rate and chip evacuation, 7791VS series utilizes Z-axial cutting force. It is efficient in both roughing operations and deep cavities, and process minimizes tool deflection and side forces. Available in 1.5-6 in. and 40-125 mm dia, construction materials include steels, cast iron, aluminum, alloys, and high-temperature alloys. Product is suited for aerospace...

Read More »

All Topics